Veneer Splicer

Kuper FW 630 Mini

Year of construction: 2026, condition: new, SPINNER 1500s Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. Iedpfefuwmujx Abrohu operator side: - in throughput direction right General machine features: - Main motor power: 2,2 kW - Max. ring rotation speed: 50 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total weight: 1200 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems - Infeed and outfeed rollers Technical features: Product to Wrap Sizes according to technical drawings / Diagram - Max. length: Unlimited - Min. length (w x h x l): 100x18x550 mm Conveyor belt’s features: - Useful length: 1924mm - Total length: 2000mm - Working height: 900mm - Electric motor power: 0,75 kW - Max. speed: 10 m/sec. - Max. Load Capacity. 150kg/m Stretchfilm features: - Max. width: 250mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Ioded Dhw Nspfx Abrshu

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Ihjdpfx Absvvkqgereu

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Isdjgmn H Aspfx Abrjhu

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces Isdpfxsfg Rlce Abrehu program.

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Ijdpfx Ajx Twcvsbrshu

Condition: new, Year of construction: 2023, power: 7 kW (9.52 HP), planing width: 520 mm, number of blades: 4, overall weight: 483 kg, height adjustment type: electric, planer shaft diameter: 120 mm, planing height: 240 mm, SCM MiniMax s 52es thicknesser Specifications: - condition - new - manufacturer - SCM - width of the thicknesser table - 520 mm - length of the thicknesser table - 850 mm - minimum thickness of the element - 3 mm - maximum thickness of the element - 240 mm - maximum thickness of the thicknesser harvest - 5 mm - motor power - 7 kW - supply voltage - 400 V - shaft for 4 conventional knives - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm - maximum planing width - 520 mm - feed speed - 5 / 8 / 12 / 18 m/min - diameter of the exhaust stub - 120 mm - weight (net) - about 493 kg - overall dimensions - 144 x 108 x 110 cm ( W x L x H ) Additional information: - machine brand new - pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transport costs - available from stock in Italy Isdpequ U Dnofx Abrjhu

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Ihedpolc Dwnjfx Abrou Control cabinet: 950 x 700 x 1300 From location

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Isdpfx Aboxdl U Esrjhu

Year of construction: 2026, condition: new, Fully automatic horizontal stretchfilmwraping machine SPINNER 1800s Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. operator side: - in throughput direction right General machine features: - Main motor power: 3kW - Max. ring rotation speed: 40 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total weight: 1600 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems Optional Equipments; - Different sized conveyors - Infeed and outfeed rollers - Air bubble film unit. Technical features: Isdpofzrhdofx Abrohu Product to Wrap Sizes - Max. length: Unlimited - Min. length (WxHxL): 600x 450x 1200 mm Conveyor belt’s features: - Useful length: 2300mm - Total length: 2450mm - Working height: 950 mm - Electric motor power: 0,55 kW - Max. speed: 10m/sec. - Max. load capacity 100 kg/m Stretchfilm features: - Max. width: 250mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron