Bed milling machine 5000 x 1200 x 2000

Lagun Goratu GBM CM5

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability Cedpjyrf Dkofx Anwerb - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm Cjdpfoygxy Ujx Anwjrb number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: used, Year of construction: 2017, Technical details: turning diameter: 356 mm turning length: 705 mm control: CELOS M730 UM MAPPS swing dia.: 742 mm standard turning diameter: 275 mm travel -x axis: 260 mm travel -y axis: 100 ( ±50) mm travel -z axis: 795 mm Credpfx Ansyxpv Ssweb rapid travel - longitudinal/face: 30 / 30 m/min Rapid travel B-axis (parts transfer subspindle): 734 m/min Spindle 1 RPM: 4000 1/min Spindle 1 Power: 15/18,5/18,5 kW Spindle 1 Torque: 409/505 /599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 RPM: 4500 1/min Spindle 2 power: 7,5/11 kW turret stations / rotary tool stations: 20 / 20 BMT40 speed of driven tools: 10000 1/min : 3.7/5,5/5,5 kW torque rotary tools: 14 / 24 Nm total power requirement: 38 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 4 (9) x 2,1 x 2,2 m Accerories Chip conveyor Barfeeder Interface Parts catcher Sp. 1 und Sp. 2 Parts and total counter Signal lamp 3 colors Spindle 1 Chuck Kitagawa B 210 (250 mm) Spindle 2 Chuck Kitagawa B 206 (160 mm) Conveyor for partsdisposal Automatic door Interface for coolant through the spindle Coolant through spindle 70 bar Knoll Program restart Tool presetter Spindle 1 & 2 Coolant shower 1m Barfeeder magazine IRCO High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by CELOS-MAPPS 4 Control. Very low cutting hours. Machine is like new. All existing toolholders and life tool holders come with the machine. *

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Length: 15.74 m Diameter: 2.90 m Height: 3.10 m - Transport height - Access ladder - Platform with railing - Firmly welded saddle feet - Ventilation - Limit value transmitter - Dipstick - leak detector Loading and transportation can be offered. Only serious and serious inquiries will be answered: Crjdpfouzvyuox Anwjb Name, e-mail address and telephone number.

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application. Credpfx Aofyiqbonwsb

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm Cjdpfxsbh Ubwo Anwjrb coil weight: 12,5 t mandrel Ø: 508 mm

Condition: good (used), Year of construction: 2007, Year of manufacture: 2007 Spindle hours approx. 14,000 (replaced 11/2017) Drive operating hours approx. 68,500 Traverse paths: 850x700x500 mm Rapid traverse: 45 m/min Speed: 18,000 rpm HSK 63 Tool changer with 38 stations Laser tool measurement/breakage monitoring NC tilting rotary table D=420 mm Control: Siemens 840D Internal coolant supply 80 bar Paper band filter Chip conveyor Electronic handwheel module Crjdpfx Asy Er Ukenweb Oil mist extraction Chip flushing gun Thermal compensation Heidenhain probing system

Condition: like new (used), Year of construction: 2022, 3-Axis CNC Lathe Type: Puma GT 2600 LM Manufacturer: Doosan Year of manufacture: 2022 New Fanuc i Series Plus touch control 12-inch Samchully hydraulic chuck Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Spindle bore: 81 mm Spindle speed: 3500 rpm Turret: 12 positions BMT 55 Driven tool speed: 5000 rpm X: 265 mm Z: 1100 mm C: ±360° LNS chip conveyor Crjdpjywthvjfx Anwob Tool probe MT5 tailstock Including: 4 driven tool holders 2/2 8 standard tool holders Total: 12 pcs Documentation Machine as new, only 1,800 operating hours Available for inspection in our warehouse

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: chip conveyor, Options: Left side chip conveyor Coolant temperature control 15,000 rpm spindle High-torque spindle Linear scales on axes Losma extraction Credpfx Aneycr Nueweb Automatic door Detachable handwheel 3-color signal lamp Renishaw RMP 600 Continuous 5 axes ISO 5-axis function Performance package Memory extension Robot interface

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Credjv S E Edjpfx Anwob