4th and 5th knife attachment for Trimmer

Müller Martini 4th-5th knife

Year of construction: 2013, condition: used, Sewing machine Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen - Semi automatic setting - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator - Book stacker - Roller table delivery - PIAB/Venturi Fpjdpfx Alermyp Ro Usn

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Fpedpjwcqw Sefx Al Uon Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Fpjdpfx Alot H Nhhj Ujn Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Fpodpozmp Nrefx Al Uen

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Fedemhhf Sspfx Al Uspn The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 1995, Folding machine MBO K76 -4 P KZ Year: 1995 Description: - 16 page folder Feeder Fodpfx Aeilc Sbsl Uspn - Pallet feeder: FP - 76 - Counter - Pump Folding unit - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left and right - Excluding delivery Power supply : 400 V, 3 phases

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: EE425200, paper weight (max.): 400 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 380 V, Purchased in working condition and transferred to our warehouse. It is currently not in working condition. Ink and water rollers need to be replaced soon. Simultaneous front and back printing is possible. Very suitable for book printing. Fjdpfx Aloy Emmzo Uepn

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Boxmaker 2500 working width, fully automatic, 2 flexo printers 500x200 mm, 2 die cutters for hand holes, or depending on the installed die, year of manufacture 2023. Fjdpfx Aloxgbycj Uepn

Year of construction: 1996, condition: good (used), Label printing machine, model Labelmen PW180DLU, year of manufacture 1996, 4 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwind unit, slitter-rewinder, in good condition, available immediately. Fpodpfx Aloiphiyj Uon If you are interested, we will also be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility, by prior appointment.

Condition: excellent (used), functionality: fully functional, The Horizon BQ-270 is a single-clamp perfect binder designed for professional production that requires consistent quality, ease of use, and fast format changes. This model combines automation and precision, allowing for the production of books with professional finishes (square spine and uniform gluing) even with non-specialized operators. Thanks to its automated system and intuitive interface, it is ideal for both short and medium runs. Main features: Single-clamp perfect binder Hot-melt gluing system with spine trimming Automatic cover feeder with scoring Quick adjustments via screen and intuitive controls Job memory for order repetition Automatic block thickness measurement system 👉 Allows format changes in just a few seconds, optimizing production. ⚙️ Technical specifications Maximum book format: 320 x 320 mm Minimum book format: 135 x 105 mm Thickness: 1 – 50 mm Maximum cover format: 320 x 660 mm Cover weight: 80 – 300 g/m² Speed: up to 500 cycles/hour Number of clamps: 1 Power supply: three-phase Approximate weight: 900 kg 💡 Advantages Fodoywt Amspfx Al Uopn High binding quality (clean and uniform spine) Easy operation (ideal for non-expert operators) Quick setup between jobs Efficient production up to 500 books/hour Robust and reliable construction 🎯 Applications Print-on-demand books Magazines and catalogs Manuals and brochures Digital production and commercial printing