BTS-Drum Crusher PLC auto, barrels

BTS-Fasspresse PLC BTS-Drum Crusher PLC

Year of construction: 1994, condition: ready for operation (used), Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked. Gbedsip D Rpopfx Ah Ejw

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Gjdpfx Ahox Ug Do Esbw Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: excellent (used), Wine tanks and for other liquid: - 2080 lit - 3110 lit - 4290 lit Godpotzz H Sofx Ah Esbw - 5150 lit - 7520 lit - 9390 lit - 10650 lit - 11750 lit - 12520 lit - 18020 lit

Condition: refurbished (used), Year of construction: 2018, Mobile hammer mill Mobil Flex 1000 with drum magnet and discharge belt Drive: 250 Kw electric 4-hydraulic supports for lifting the machine for transportation Total weight: 33,000 kg Rotor weight: 3,000 kg Production: up to 11 to/h (depending on material size, grid size, parameter settings) With soundproof housing Dimensions: 11,750 x 2,500 x 4,380 mm Number of hammers: 24 pcs. Hammer weight: 22 kg Gsdpfxeph Uy Ts Ah Eobw System is being overhauled

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside Gjdpoh Ellzofx Ah Esbw endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Gjdpfou Thhrex Ah Esbw Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Combined hydraulic shear with two independent pistons, punching station with mechanical stop and adjustable piston stroke, notching, shearing of plates, bars and profiles with adjustable stop with automatic cutting control, double pedal board, centralized lubrication system, working light. Machine supplied with safety guards according to CE rules, CE conformity declaration, user manual. Power : Ton 85. Engine power : Kw 7.5 Dimensions : mm 1.920 x 950 x 2.040 ( L x W x H ). Weight: 2.315 Kg: 2.315 Kg PUNCHING : Punching capacity : mm Ø 33 x Thickness 20 mm. Recess depth: mm 355. Punching stroke : mm 80. Working height : mm 1.080. SHEARING : Plates : mm 380 x 20. mm 480 x 15. Length of blades : mm 482. Godpfxsggbt So Ah Ejbw Round bars : mm Ø 50. Square bars : mm 50. 90° corner profiles : 150 x 150 x 15 mm. Angle profiles at 45°: mm 80 x 8. SKIRTING : Max thickness : mm 13. Width : mm 52. Depth : mm 100. Working height : mm 940.

Condition: used, overall weight: 24,000 kg, rotor diameter: 640 mm, number of blades: 114, rotor length: 2,500 mm, power: 247 kW (335.83 HP), No. 10023 Single-shaft shredder Vecoplan VAZ 2500 Used, year of construction approx. 2006 2022 general overhaul Since overhaul approx. 700 operating hours Areas of application: Residual wood, waste wood, packaging material, film, plastic, paper, textiles, domestic waste, commercial waste, production residues as bulk material, production residues in bales 247 kW Rotor length 2500 mm Rotor diameter 640 mm 114 pieces 60x60 cube knives, 4-row Shredding optionally to a grain size of approx. 10 - 250 mm Screen basket 50 mm Godpfxewh T N Ue Ah Ejbw Throughput capacity up to 25 tons per hour / throughput waste wood approx. 30 tons per hour Material feed with hydraulic pusher Scope of delivery: machine, hopper, control cabinet, refrigerator Mechanization optionally available Transport dimensions approx. 4750 x 4640 x 2340 mm LWH Weight approx. 24000 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2024, operating hours: 10 h, condition: like new (used), Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. Gbodpjtziudjfx Ah Eow The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: - X: 800 mm - Y: 800 mm - Z: 800 mm Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Spindle Taper: CAT 50 Gjdpfxov Tvivo Ah Eebw Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80