WEIMA WLK15 90KW rotor 1500mm

WEIMA WEIMA WLK15 90KW

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) Nodpjtqdxfjfx Almsda ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM Nedpfx Aljyhc T Ismeda - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Nsdpfjv Amw Nsx Almsda Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Ndsdsun Sx Sjpfx Almea Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D with 2 co-extr. WEBER ZE30 Year of construction 2001 Njdpfx Ashy Tp Dolmeda Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Ndjdpfxjltmi Sj Almja Price and further information upon request.

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Njdpfxjic Rl Do Almsda Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam Njdpfjfi Tg Hex Almjda No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: used, Valon Kone VK26M Njdpfxsvgtz Ne Almsda With infeed and outfeed conveyors.

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821 Ndjdpjrqzgkofx Almoa