CNC press brake PETERZEN MORICO 70065

Year of construction

2025

Condition

New

Location

Douarnenez France

Machine data

Machine type:: CNC press brake PETERZEN MORICO 70065

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Z.I. de Pouldavid, 29100 Douarnenez, France

Call

Details about the offer

Listing ID:: A19000241

Update:: 23.04.2025

Description

High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1

Rigid S355 steel frame
Workbench structure and Ram manufactured from laminated S355 steel
Symetric renforced Throats
Heavy grey cast iron slydways with automatic lubrication system
CNC Controller CYBELEC VisiPac 8 axis + 1
Bosch Rexroth servo valves
Inovance servo drive systems
DIEMA high resolution glass scales for high bending precision

Bending force 700T
Bending lenght 6500 mm
Distance between columns 5100 mm
Depth throat 420 mm
Ram stroke 400 mm
Closing Ram approach speed limited to 30 mm/s for human operation
Closing Ram working speed 7 mm/s
Return-speed 40 mm/s
Main hydraulic motor 45 kW
Machine weight 62,000 kg

8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast
3D graphical profile drawing (Touch Profile) and precise 2D program creation
The opening value can be setted individually in each sequence
Machine can be inferfaced with different CAM software
Easy single bends with the EasyBend page
Correction menu
Many languages available

Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard
Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security
Ppjdpfxswd I Sve Ag Djw
All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded

4 Axis Back gauge adopts linear guides and Ballscrews
Back gauge travel X axis 1000 mm
2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2)
Automatic height adjustment (Axis R)

2 CNC Bending Followers 400 kg up to 60° angle
Motorised displacement of bending followers and parking area on the right of the bending table

Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system.

Safety Equipment :
3-position Foot switch with Emergency Stop Position
Closing approaching speed limited to 30 mm/s for human operation
Laser safety protection and permanent speed monitoring
Closing bending (working) speed 7 mm/s
Side covers with safety switch
Rear-protection with sliding door and safety switch
Low control Voltage (24V)
Safety control unit category IV

Standard configuration and equipment :
Electric control cabinet on left side
CNC user interface with Aluminium - arm
1 Line of punches (Upper tools) 85° R1, Height 200 mm
1 Line of centred lower Dies (to be defined)

Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE
Customisation available
CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard
Operation manual in English, German and French language

Delivery and Services available worldwide
Customized Quotation
GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Seller

Registered since: 2011

2 listings online

Call

Send inquiry

Telephone & Fax

+33 2 98 ... show

These listings may also fit your interest.

Auction

Област София

9,223 km

Machining center
RapidMFC EVOLUTION II

€8,400

To the auction

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Ppjdpfszln D Ejx Ag Djw Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

See details

Listing

Steel edge grinding machine METAKOV METAGRIND M01 EP

Rödermark

7,854 km

Steel edge grinding machine
METAKOVMETAGRIND M01 EP

Call

Condition: used, Year of construction: 2020, machine/vehicle number: 031EP-2020, Lg.no. 24558 Technical data: - Abrasive diameter 150 mm - Sanding unit swivels on articulated arm - Swivel radius of sanding arm 2000 mm - Motorized dust extraction Psdpfx Agovazz Dj Dopw - Infinitely variable disc speed - 800 - 2200 rpm - Table dimensions 1500 x 880 mm - table height approx. 920 mm - Drive 400 V / 3.6 kW - Space requirement approx. W 1600 x H 1600 x D 1600 mm - Weight approx. 250 kg

See details

Auction

Cutting and processing center Rapid Optima VI

Област София

9,223 km

Cutting and processing center
RapidOptima VI

€11,200

To the auction

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Podezlnxispfx Ag Dopw Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

See details

Auction

Cutting and processing center Elumatec SBZ 608

Област София

9,223 km

Cutting and processing center
ElumatecSBZ 608

€10,000

To the auction

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Podozlnvuopfx Ag Dopw Barcode scanner

See details

Listing

CNC press brakes KK Kletzer CNC Abkantpresse KKI EUROPA XL 6050 mm x 600 to, Y

Austria

8,383 km

CNC press brakes
KK KletzerCNC Abkantpresse KKI EUROPA XL 6050 mm x 600 to, Y

€217,900

EXW ONO plus VAT

Call

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Ppsdpfxed Ehh Re Ag Dow Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

See details

Auction

Front loader forklift Jungheinrich TFG S80GE 360ZT

Schleswig-Holstein

7,667 km

Front loader forklift
JungheinrichTFG S80GE 360ZT

€15,500

To the auction

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Pjdpfx Agozlhnqe Dopw Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

See details

Auction

Laser cutting machine TRUMPF TruLaser 5030 classic

Dravograd

8,449 km

Laser cutting machine
TRUMPFTruLaser 5030 classic

€4,500

To the auction

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg Pedpfozlhcnox Ag Depw EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine

See details

Listing

Mechanical lathe Craven 2000mm x 8000mm Heavy Duty Lathe

United Kingdom

7,073 km

Mechanical lathe
Craven2000mm x 8000mm Heavy Duty Lathe

Call

Auction

Groningen

7,504 km

4-axis CNC machine
ElumatecSBZ 140

€17,500

To the auction

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Ppedpfszhuyfsx Ag Dew Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

See details

Auction

Universal machining center DECKEL MAHO DMU 80 monoBlock

Baden-Württemberg

7,992 km

Universal machining center
DECKEL MAHODMU 80 monoBlock

€15,500

To the auction

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Pjdpfxszmry To Ag Dspw Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

See details

Listing

Metal Gringing & Edge Rounding Machine NS Maquinas DM 1100 ZC - NEUMASCHINE

Dietzenbach

7,849 km

Metal Gringing & Edge Rounding Machine
NS MaquinasDM 1100 ZC - NEUMASCHINE

Call

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Pedpsd Hintjfx Ag Depw Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

See details

Auction

Vertical machining center BRIDGEPORT VMC 800

Baden-Württemberg

7,992 km

Vertical machining center
BRIDGEPORTVMC 800

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Pedpezmryyjfx Ag Djpw Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Operating manual

See details

Auction

Baden-Württemberg

7,992 km

Machining center
MIKRONVCP 800 W

€9,500

To the auction

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Ppodpfx Aezmrpujg Djw Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

See details

Listing

Hydraulic press brake Trumpf EHT TruBend 8400-50S 5050mm x 400t

Trittau

7,709 km

Hydraulic press brake
Trumpf EHTTruBend 8400-50S 5050mm x 400t

Call

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Ppodpfx Aszd Tf Ssg Dow Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

See details

Auction

Horizontal plate boring mill PARPAS ML 100 - 5000

Sachsen

8,028 km

Horizontal plate boring mill
PARPASML 100 - 5000

€7,000

To the auction

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Psdpfx Agszlryqj Depw Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tool holder: SK 50 MACHINE DETAILS Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.

See details

Advertise here