Box tipper

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 140 2814, conveyor belt width: 700 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting a bid obligates you to collect the machine on time by 22.05.2026! TECHNICAL DETAILS Band width: 60 - 700 mm Sheet thickness: 0.5 - 4 mm Feed length: 0 - 700 mm Fpedpfx Akjy Nkdloveg

Condition: good (used), This machine combines in a unique way mixer, cutter and emulsifier in a closed system. Fpedpsm Drylofx Akvog The advantages are obvious: – space-saving by compact design, – complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, – stable end product with reproducible quality by fully automatic process control, – the possibility for direct and indirect heating and cooling, – the possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarsegrained small pieces. In short: Time and cost saving with improved product quality. Capacity 900 l Voltage Electrical: 400V 50Hz 3N Installed Power 2x106 kW + 132 kW Main material Stainlees Steel Tank with mixer 2000 ltr

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 140 256.4, conveyor belt width: 600 mm, sheet thickness (max.): 4 mm, The payment deadline for the machine is 18.05.2026! Submitting an offer obligates you to collect on time by 22.05.2026! TECHNICAL DETAILS: Band width: 600 mm, Sheet thickness: 0.5 - 4 mm, Feed length: steplessly adjustable 30 - 500 mm. Fedpoy Nkb Dofx Akvepg

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 4004/1135, conveyor belt thickness: 3 mm, conveyor belt width: 600 mm, power: 5 kW (6.80 HP), The payment deadline for the machine is 18.05.2026! Submission of a bid requires timely collection by 22.05.2026! TECHNICAL DETAILS Band width: 100 - 600 mm Band thickness: 0.5 - 3 mm Max. load: 11 t MACHINE DETAILS Voltage: 24 / 380 V Frequency: 50 Hz Power: 5 kW EQUIPMENT Decoiler Integrated feed unit Fpodoy Nkaajpfx Akvsg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Our horizontal form, fill and seal machine from the DEAPHS series is specially designed for filling sachets and doypacks sealed on 3 and 4 sides. Thanks to the various dosing systems, such as auger dosing, the volumetric cup filler and the multi-head filler, the machine reliably packs powdery, liquid and granular products. The machine also produces the bags to be filled independently from flat film, making it a cost-effective and efficient packaging solution. The modular design of the form, fill and seal machine means that it can be converted and extended quickly and easily. ✅ Perfectly suited for food, pet food, pharmaceutical products, cosmetics and other non-food products. ✅ Also ideal for filling small product quantities and samples - for example in our mini pouches. ✅ Optional accessories such as volumetric cup filling system, multi-head combination weigher, piston filling device and Hibar pump filler ✅ You can also obtain suitable packaging material (pouches & film) from us Independent film unwinding shaft: Ensures good control of film tension, flexible adjustment to film roll width and bag specification possible, better doypack forming. Fsdpfx Aksum R Ezjvspg Configuration: -Film unwinding shaft -Bag bottom sealing -Bag bottom former -Three horizontal sealing units -Two vertical sealing units -Servo bag take-off -Mechanical bag cutting -Vacuum bag opening -Photocell control -LCD - Touch display -SPS - Panasonic -Servo-controlled film feed Machine dimensions: approx. 5,500mm x 1,100mm x 1,400mm (L x W x H) Net weight: approx. 2,000kg Connected load: 380V, 3-Ph, 50Hz, 6.5kW Air consumption: 0.23m³/min Main components: Mitsubishi, Panasonic, Autonics, ABB, Airtac, SMC

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Fedpfx Aksy Ib H Ievopg Operating hours: 98,381 h Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Fpedpfsy Ib A Njx Akvjg TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Fpsdorp E Nnspfx Akvog

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42365L00150, Year of construction: 2022, operating hours: 1,792 h, load capacity: 2,500 kg, empty load weight: 690 kg, total height: 1,300 mm, total length: 3,500 mm, total width: 800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Charger: E24/55 HFX Operating hours: 1,792 h Dimensions & Weight Dimensions (L x W x H): 3,500 x 800 x 1,300 mm Unladen weight: 690 kg FEATURES Charger PIN code unlocking The following technical data is based on the manufacturer's datasheet. The seller cannot guarantee its accuracy. Load centre: 600 mm Distance from wheel axle to load carrier face: 975 mm Wheelbase: 1,478 mm Wheels Fpedpfx Ajy H Dk Hskvsg Tyres, drive side / load side: Rubber + Polyurethane / Polyurethane Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm Load wheel dimensions: Ø 85 x L 85 mm Load wheel dimensions, bogies: Ø 85 x L 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogies: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Drawbar height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier face: 1,170 mm Outer fork arm width: 520 / 540 / 560 / 680 mm Ground clearance, wheelbase centre: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet, transverse: 2,790 mm Turning radius, initial lift raised/lowered: min. 2,095 / 2,165 mm Performance Data Travel speed with/without load: 10 / 12 km/h External reference: W42365L00150

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42365L00151, Year of construction: 2022, operating hours: 1,666 h, load capacity: 2,500 kg, empty load weight: 605 kg, total height: 1,700 mm, total length: 2,300 mm, total width: 800 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,500 kg MACHINE DETAILS Charger: HFX 1600/3200 Operating hours: 1,666 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,700 mm Unladen weight: 605 kg EQUIPMENT Battery charger PIN code unlocking The following technical data is taken from the manufacturer’s datasheet. The seller cannot guarantee its accuracy. Load center: 600 mm Distance from load wheel axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tires, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x L 90 mm / Ø 230 x L 100 mm Fpsdpfx Akjy H Dciovjg Load side wheel dimensions: Ø 85 x L 85 mm Load side wheel dimensions, bogie: Ø 85 x L 60 mm Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogie: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Tiller height in travel position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fork dimensions: 55 / 165 / 1,150 mm Outer fork width: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet, transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance data Travel speed with/without load: 10 / 12 km/h External reference: W42365L00151

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Fpedsv Ha Uispfx Akvjg Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W42364L00583, Year of construction: 2022, operating hours: 2,593 h, load capacity: 2,000 kg, empty load weight: 595 kg, total height: 1,300 mm, total length: 2,300 mm, total width: 800 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rated load capacity: 2,000 kg MACHINE DETAILS Charger: E 24/55 HFX Operating hours: 2,596 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 800 x 1,300 mm Unladen weight: 595 kg EQUIPMENT Charger Key The following technical data are taken from the manufacturer's datasheet. The seller cannot guarantee their accuracy. Load center: 600 mm Distance from drive axle to load carrier surface: 975 mm Wheelbase: 1,478 mm Wheels Tyres, drive side / load side: Rubber + polyurethane / polyurethane Drive wheel dimensions: Ø 230 x W 90 mm / Ø 230 x W 100 mm Load wheel dimensions: Ø 85 x W 85 mm Load wheel dimensions, bogie: Ø 85 x W 60 mm Fsdpfxoy H Dbro Akvopg Number of wheels, drive side / load side: 1X + 2 / 2 Number of wheels, drive side / load side with bogie: 1X + 2 / 4 Track width drive side: 502 mm Track width load side: 380 mm Dimensions Lift: 125 mm Drawbar height in operating position: min. 1,030 mm / max. 1,115 mm Height at fork tips: 86 mm Distance to load carrier surface: 1,170 mm Fork dimensions: 55 / 165 / 1,150 mm External fork width: 520 / 540 / 560 / 680 mm Ground clearance at centre of wheelbase: 35 mm Load dimensions: 800 x 1,200 mm Aisle width with 800 x 1,200 mm pallet transverse: 2,790 mm Turning radius, initial lift raised / lowered: min. 2,095 / 2,165 mm Performance Data Travel speed with load / without load: 10 / 12 km/h External reference: W42364L00583

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Fpodpoy Hki Aefx Akvog Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: ready for operation (used), A Baader Lino poultry buffer system is available. Fsdpfxst Nhmuj Akvopg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Fpjdpfxjy Hkhrj Akvjg Weight: 14,000 kg Operating hours: 32,790 h EQUIPMENT Measuring probe (manufacturer: Renishaw) Chip cart 47 SK50 tool holders, including approximately 25 Weldon holders Emulsion cleaning unit