Planolith surface plate 800x600

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, laser power: 2,000 W, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, The machine is in very good condition and has been regularly serviced by qualified service technicians! TECHNICAL DETAILS Laser power: 2,000 W Sheet metal thickness max: 16 mm Sheet metal thickness, steel max: 16 mm Sheet metal thickness, stainless steel max: 8 mm Nedpezlc Sqofx Af Uswi Sheet metal thickness, aluminum max: 6 mm Table length: 3,000 mm Table width: 1,500 mm EQUIPMENT Cooling unit Emergency stop switch Fume extraction Safety light curtain Dust extraction Note: The operating hours can be found in the last image.

Year of construction: 2016, condition: reconditioned (used), For sale is 1 hood-type dishwasher from Meiko, model DV 80.2, manufactured in 2015/16. Condition: Good, has been used partially with soft water. No dosing unit included! These machines are former lease units. Various configurations are available, potentially with internal salt softener, with GIO module, or completely without softener. Please let us know how you would like your package to be assembled. The quoted price is a base price depending on the equipment—request your individual offer! Comes with a 6-month spare parts warranty. Preventive maintenance with replacement of several wear parts has been performed regularly. Inspection and test run on site is possible and encouraged. Technical Data: Output: up to 60/40/17 racks (equals approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program cycle times: 60/90/210 seconds Nsdpfxjp Ebn Do Af Uowi Rack size (mm): 500 x 500 Entry height: 440 mm Tank capacity: 22 L Water consumption per rack: 2.6 L Tank heating: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: Stainless steel Connected load: 400 V / 11.2 kW (cold water), 9.7 kW (hot water) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical Installation: Electrical connection: 3-phase current, 3 NPE, 400 V, 50 Hz. The electrical setup complies with VDE regulations. Water Installation: The dishwashers can be connected directly to the mains water supply without additional safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. Installation regulation EN 1717 must be observed. Drain: ¾". On-site wall drain max. 700 mm height. Length of connection hoses approx. 1.8 m from machine. Collection of the machines is preferred. Shipping via freight company is possible at buyer’s expense.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 85 t, stroke length: 445 mm, overall weight: 8,600 kg, operating pressure: 300 bar, control voltage: 24 V, TECHNICAL DETAILS Control system: TASC 6000 Pressing force: 850 kN Stroke: 445 mm Operating pressure: 300 bar Follow-up time: 95 ms Follow-up travel at 220 mm/s: 10 mm Follow-up travel at 160 mm/s: 8.5 mm Equipment: 4-axis rear stop, bending aid MACHINE DETAILS Safety clearance: 190 mm Voltage: 3 x 400 V Rated current: 24.0 A Frequency: 50 Hz Connected power: 17.0 kVA Control voltage: 24 V Compressed air connection: 6 bar Nedpfxozlc Ryj Af Ujwi Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,500 x 2,000 mm Machine weight: 8,600 kg Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: GN08201038G, spindle speed (max.): 4,500 rpm, center width: 460 mm, controller model: Fanuc 0i-Mate TO, power: 15 kW (20.39 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nodpfxozk D Ans Af Ujwi Swing over bed: 250 mm Distance between centers: 460 mm Spindle bore: 62 mm Max. spindle speed: 4,500 rpm Swing over removable bed: 460 mm MACHINE DETAILS Control system: Fanuc 0i-Mate TO Power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 2,790 x 1,570 x 1,750 mm Net weight: 4,300 kg Transport packages: 2 EQUIPMENT Removable bed CE marking

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Nwedpjh Hd A Ssfx Af Uoi Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center width: 1,600 mm, center height: 275 mm, spindle speed (max.): 3,500 rpm, controller model: Fagor 8055, power: 15.5 kW (21.07 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height over bed: 275 mm Swing over bed: 550 mm Swing over carriage: 310 mm Distance between centers: 1,600 mm Bed width: 420 mm Nodpfozk D Abox Af Uswi Spindle bore: 82 mm Spindle speed: 80 – 3,500 rpm Maximum workpiece weight: 2,000 kg Swing over removable bed: 790 mm MACHINE DETAILS Control system: Fagor 8055 Power: 15.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,150 x 220 mm Net weight: 5,000 kg EQUIPMENT Fixed steady rest Removable bed Three-jaw chuck Travelling steady rest

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,975 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 635 mm, center width: 600 mm, center height: 340 mm, controller model: Siemens Sinumerik 840D SL, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning height: 340 mm Maximum turning length: 600 mm Turning diameter over bed: 680 mm Turning diameter over carriage: 565 mm Spindle bore: 65 mm Maximum spindle speed: 5,000 rpm X-axis travel: 260 mm Y-axis travel: 635 mm MACHINE DETAILS Nwsdpfszk Dz Rsx Af Uji Control system: Siemens Sinumerik 840D SL Power: 25.0 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,500 x 2,300 mm Net weight: 6,500 kg Operating hours: 10,975 h EQUIPMENT Chip conveyor Three-jaw chuck

Condition: ready for operation (used), Year of construction: 2023, A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Njdpfxowx Rcyo Af Ujwi

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, machine/vehicle number: 80, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, power: 5 kW (6.80 HP), empty load weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! Nwodpfx Afozk Dzqo Uoi MACHINE DETAILS Drive system: Conventional Power: 5.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,200 x 1,900 mm Weight: 2,500 kg Transport packages: 3 EQUIPMENT Documentation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge depth: 1,000 mm MACHINE DETAILS Nodpfezk Dzdox Af Uowi Power: 11.0 kW Control system: Conventional Control system manufacturer: Elgo Drive type: Hydraulic Dimensions & Weight Overall length: 6,400 mm Weight: 17,500 kg EQUIPMENT Documentation Sheet support system: Pneumatic Angle adjustment: Motorized Back gauge type: Electric

Condition: new, 6 St. range L-W-H 880 x 580 x 800 mm weight 126 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. Nwodpeupxrbjfx Af Uei 2 x 75, 2 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 24619, functionality: fully functional, operating hours: 2,442 h, power: 15.8 kW (21.48 HP), pressing force: 120 t, stroke length: 260 mm, controller model: Delem DA-66T, working width: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 120 t Max. working width: 3,100 mm Frame spacing: 2,550 mm Rear gauge depth: 750 mm Max. stroke: 260 mm Number of axes: 6 (Y1+Y2+X+R+Z1+Z2) MACHINE DETAILS Power: 15.8 kW Drive system: CNC Control: Delem DA-66T Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,000 x 2,700 mm Weight: 8,500 kg Operating hours: 2,442 h EQUIPMENT Finger guard Tools included Crowning system: CNC-controlled Nedpfx Afezk Dy Tj Uewi Punch holder: Standard Tool holder type: European style

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, working width: 550 mm, power: 32 kW (43.51 HP), empty load weight: 3,000 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Nsdpfx Afszk Dyyo Uswi Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Empty weight: 3,000 kg Control: Conventional Wet/Dry: Dry EQUIPMENT Station type 1: Belt sander CE marking

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Njdpeh Uqpvsfx Af Uowi Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 161, center width: 1,500 mm, center height: 250 mm, spindle speed (max.): 2,400 rpm, controller model: Heidenhain Manual-Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning height: 250 mm Turning diameter over bed: 500 mm Turning diameter over slide: 340 mm Distance between centers: 1,500 mm Bed width: 315 mm Spindle bore: 80 mm Spindle speed: 20 - 2,400 rpm MACHINE DETAILS Control system: Heidenhain Manual-Plus Programming: Teach-in Power: 11.0 kW Dimensions & Weight Dimensions (L x W x H): 3,150 x 1,650 x 1,800 mm Net weight: 2,500 kg Nsdpozk Dwrsfx Af Uswi EQUIPMENT Quick-change tool holder 3-jaw chuck CE marking