Impeller Pumpe

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Tjdozln D Eopfx Aqxja Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles.

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Tjdpex U Exusfx Aqxsa

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Tjdpfx Aqszlnxioxja Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Tsdpjzlnvuefx Aqxea Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

Condition: good (used), Year of construction: 2009, D2 Europack Tray / Pot Sealer Fully stainless steel In good working condition Todet Tyivepfx Aqxsa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,125 h, load capacity: 8,000 kg, lifting height: 3,600 mm, mast type: duplex, fork length: 2,050 mm, overall weight: 13,948 kg, An oil change was performed before the sale. Only the hydraulic oil was not changed. The filters have been replaced. TECHNICAL DETAILS Load capacity: 8,000 kg with load center at 900 mm Residual load capacity with Kaup 10T160 fork positioner: 7,320 kg with load center at 900 mm Tractive force with/without load: 45.6 kN Lifting height: approx. 3,600 mm Fork length: approx. 2,050 mm MACHINE DETAILS Engine: LPG GM 5.7L V8 Cylinders: 8 Displacement: 5,700 cm³ Rated speed: 2,200 rpm Power: 85 kW Operating hours according to display: approx. 4,125 h Operation: Solo-Pilot with multi-function display Dimensions & Weight Overall length including forks: approx. 5,950 mm Overall width: approx. 2,150 mm Height with mast retracted: approx. 3,160 mm Height with mast extended: approx. 4,960 mm Height above protective roof: approx. 2,705 mm Self-weight: approx. 13,948 kg EQUIPMENT Kaup 10T160 fork positioner Duplex mast 3rd + 4th control circuit Tjdpfozlhnqex Aqxoa Side shifter Solo-Pilot Single pedal control Work lights front and rear Full cabin with heater Note: The two tires on the steering axle, as well as the fork tines, should be replaced. This can be requested and carried out by the seller. Fork tine length would be selectable.

Condition: used, Year of construction: 2007, operating hours: 39,023 h, machine/vehicle number: 1315318, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 900 kg, No minimum price – guaranteed sale to the highest bidder! The machine has not been powered on for approximately one year. TECHNICAL DETAILS Laser power: 5,000 W Working area (X x Y x Z): 3,000 mm x 1,500 mm x 115 mm Sheet metal thickness, structural steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm Maximum workpiece weight: 900 kg Positioning speed max.: 300 m/min Tsdpfx Aozlhcnsqxoa Positioning accuracy: +/- 0.1 mm MACHINE DETAILS Control system: CNC Siemens Sinumerik 840 D Operating hours, laser on: 77,107 h Operating hours, beam on: 39,023 h Dimensions & Weight Machine dimensions (L x W x H): 11,100 mm x 4,600 mm x 2,400 mm Machine weight: 12,000 kg EQUIPMENT Automatic pallet changer NitroLine FocusLine PlasmaLine SprintLine ContourLine

Condition: used, Year of construction: 2010, machine/vehicle number: AT91, Used CIP Tetra Pak year 2010 15T/h The Used CIP Tetra Pak year 2010 15T/h, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning process in bottling and food processing plants. Consequently, this system ensures an effective sanitation cycle without requiring production line disassembly, optimizing downtime and reducing water and detergent consumption. Tetra Pak built the Used CIP Tetra Pak year 2010 15T/h in 2010. Specifically, its 15-ton-per-hour operational capacity makes it suitable for high-productivity plants while ensuring hygiene standards that comply with food and beverage industry regulations. Technical Features of the Used CIP Tetra Pak year 2010 15T/h The Tetra Alcip 1 applies a controlled washing cycle to remove organic and inorganic residues from production circuits. In particular, the system integrates separate tanks for water, alkaline detergent, and acid, and it automatically regulates temperature, chemical concentration, and washing time based on plant requirements. As a result, it enhances the efficiency of cleaning operations. Moreover, the Used CIP Tetra Pak year 2010 15T/h automates the cleaning process, reducing cross-contamination risks and improving production efficiency. Additionally, the system allows operators to configure different washing parameters, which enables adaptation to specific production needs and ensures thorough cleaning of filling lines, pipelines, and heat exchangers. Safety and Process Control The system includes advanced safety features, such as: Sensors that continuously monitor detergent concentration. Temperature and pressure controls throughout the cleaning cycle, ensuring optimal performance. Alarm systems that detect and manage sanitation process anomalies, thereby preventing potential failures. As a result, these features ensure this Used CIP operates reliably, minimizing operational errors and optimizing water and chemical consumption. Furthermore, the system’s automated monitoring enhances safety while reducing maintenance requirements. Operational Advantages Using this Used CIP Tetra Pak  enhances plant productivity in multiple ways. First and foremost, it reduces downtime: the continuous washing system completes fast cleaning cycles without requiring component disassembly. Moreover, it optimizes resource usage: the automatic detergent dosing system prevents chemical waste. Additionally, it ensures regulatory compliance: the system meets high hygiene standards and complies with industry regulations. At the same time, the automated nature of this system helps manufacturers streamline their cleaning procedures. Consequently, businesses benefit from both improved production continuity and reduced operational costs. Likewise, the ability to customize cleaning parameters provides greater control over sanitization processes. Conclusion Tedpfx Aqowga Iusxja In summary, this Used CIP Tetra Pak provides an efficient and reliable solution for sanitizing bottling and food production plants. Since its design prioritizes automation, this system minimizes manual intervention while maximizing operational efficiency. Furthermore, its advanced safety features ensure maximum hygiene and productivity in the beverage and liquid food industry. Ultimately, adopting this system allows companies to maintain high sanit...

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Tsdpfx Aqezhuyfjxja Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Todpfjzmry Tjx Aqxsa Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Year of construction: 2020, condition: new, Dimensions: 250x250x80mm Filter systems are used for the thorough separation of finest ferrous metal contaminants. Examination of shoe goods Universally applicable in pipe systems, funnels & slides Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular or square design. Tedpsdzqw Iofx Aqxsa Ferrous particles are reliably filtered out of the ware as they pass through the grates. In addition, this design provides easy cleaning of the stave. The filter system can be removed from the jacket with a handle. The maximum operating temperature is 80 ° C.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Todpezmryyefx Aqxsa Operating manual

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Tedpezmrpujfx Aqxsa Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Tsdsrivv Ejpfx Aqxea Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 100 mm, controller model: Heidenhain 415 B, TECHNICAL DETAILS Spindle diameter: 100 mm Travel in X-axis: 5,020 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 2,000 mm Tool holder: SK 50 MACHINE DETAILS Tedpfjzlryqsx Aqxoa Control system: Heidenhain 415 B Rotary table dimensions: 2,500 x 2,000 mm EQUIPMENT Indexable milling head 2.5 60-position tool changer Rotary table manufacturer: Scharmann Note: The rotary function of the rotary table is defective. The machine is sold without pallet changers.