Pipe milling and cutting machine FEIN

RDG - 18 - 2b

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm Hsdpfx Ajghy Azjg Isi feed rate 40 mm / min sawing of pipes in steel and greycast iron  with wall thickness of up to 22 mm  milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut Hjdpfxjfg E Hle Ag Isi • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Hsdpfx Agjqiz N Ro Iji Lifting height 9 meters

Year of construction: 2021, condition: excellent (used), Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment dimensions: height tilted min: 800mm Hjdpjm Ew Stefx Ag Iei height tilted max: 1900mm height horizontal min: 1050mm height horizontal max: 2000mm diameter of the clamping disc 1500mm length 2900mm, width 1400mm weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° Hedpevzhf Sjfx Ag Iji milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Year of construction: 2012, condition: used, fuel type: electric, weight max. in kg 2500 kg stroke 3700 mm fork length 900 mm Super elastic battery Baujahr 2013 construction height 2630 mm weight of the machine ca. t Hsdpfxefibh Rs Ag Isi Duplex / Free lift

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Hsdpfx Agsd Hmnfs Ioi Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Year of construction: 2003, condition: used, pressure 100 t stroke 10-130 mm no. of strokes 30-90 Hub/min Hodpfsra Rr Ejx Ag Iei throat 330 mm ram - range of adjustment 100 mm table surface area 950x660 mm ram surface 540x440 mm hole in the table Ø 230 mm table height 1000 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 7 t

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: Hjdpfx Aex Rv T Isg Ioi - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: ready for operation (used), Slab recovery line with below machines: Hedpfx Agegwqk So Iei One 2-blade board edger One single blade horisontal resaw Conveyors system between the machines included.