Stable stop system with adjusting screw for basic adjustment
Measuring tape inserted in guide rail
Roller conveyor with steel rollers, D = 50 mm
Fixed cover plates between the rollers
Measuring length 2000 mm
Total length approx. 2000 mm
Stop piece can be folded up manually
Roll width 300 mm
Total width approx. 460 mm
Measurements width 4000mm
Measurements depth 11000mm
Measurements height 2600mm
Machine weight 2500 kg
This RSA RASACUT SC 1000 high-performance sawing center was manufactured in 2016. This machine counts with 3937 production hours. It incorporates a cross-cut and residual piece conveyor including chip removal.
work piece width 60 mm
workpiece height 15 mm
bore diameter 16 mm
saw-blade dia. 350 mm
workpiece length - max. 6.000 mm
Roll lenght Einlauf 10.000 mm
total power requirement 15 kW
weight of the machine ca. 3,2 t
dimensions of the machine ca. 12,0 x 2,0 x 2,3 m more
min. grindable saw blade diameter:16 mm
max. grindable saw blade diameter:315 mm
chip pocket:16 mm
stroke rate grinding carriage:90-135-200 min.
grinding wheel diameter:160 mm
grinding spindle speed:2800 u. 5200 U/min
feed rate pro saw blade rotation:0,05; 0,10; 0,15; 0,20 mm
100 % before loading
one used circular saw sharpener make WMW-Königsee, type SWSK 315, year of production more
Machine weight 650 kg
Main electronic connection 400 V
This Behringer VMS 400 H Sawing Machine was manufactured in the year 2012 in Germany. It is equipped with a control unit of the same brand. This machine incorporates a cutting range max of 200 x 120 mm.
Straight cuts such as slices, wafers, blocks and also 2d free forms and contours of hard-brittle materials such as ceramics and any crystals (Si, SiC, GaAs, GaN, sapphire, InP, glass, etc.), materials based on carbon fibers, special alloys with low inductance but very high hardness, sandwich structure materials (composite materials) and composites using ceramics and various plastics, various minerals, as well as synthetic porous and brittle materials as well as graphite electrodes, plates made o... more
cutting range: 1200 x 500 mm
round material: bei 90°= 530 mm
flat material: bei 90°=1200x500 mm
round material: bei 45° re/li = 530 mm
flat material: bei 45° re/li =700x500 mm
cutting speed: 17-110 m/min
mitter cutting - both sides: 45 °
dimensions of saw-band: 8800 x 54 x 1,6 mm
bore diameter: 35 mm
spindle taper: SA 40
spindle stroke: vertical 0-350 mm
spindle revolutions per minute : 200-800 U/min
number of spindles: 3 Stück
control: 7-achsig numerisch
feed min/max: max. 300 mm/min
Link pipe cutter, pipe cutter
-intersecting pipe diameter 80-200 mm-by the number of links is the device the required tube diameter adapted to
Steel cutting wheels-ideal for working in the trench
Weight 11 kg more
Two-coordinate measuring machine
Manufacturer: Carl Zeiss Jena
Made in the GDR
Inv. no. 8812101
Operating time approx. 100 hours
with various additional components
with operating instructions in German more
Measuring length 1000 mmDisplay 1/10 mm.with pneumatic arm retractionStop bracket can be folded away or upManual clamping via hand lever with eccentric length measuring system with battery operation.--ᐳ --ᐳ for attachment to existing equipment or to taxiway.....
Model: X-TECH 410
Year of production: 2013
Automatic machine for cutting bars, profiles, thick-walled pipes Imet X-TECH 410.
The saw is equipped with software that allows you to make automatic cuts without the first cutting off the material. The machine has a belt deviation control (skew sensor) up to the set value.
Solid mechanical structure and refined control technology - a wide possibility of programming.
The machine is in very good condition, regularly serviced. more
for Pipe Ø: 21.3 - 180.3 mm
for wall thickness depending on the materials: 1.5 - 15 mm
gradual Speed regulation: 40 - 215 rpm
Connection for alternating current: 230 V
Drive power: 1.6 kW
Space requirement: 2200 x 400 x 1330 mm more
for stainless steel and Copper pipes: 8-108 mm
Steel pipes: 1/4 - 4 "
Plastic u. Compound pipes: 10 - 110 mm
for wall thickness up to: 10 mm
Working speed: 2 - 10 m / min
Drive motor: 230 V, 1200 W.
Space requirement: 820 x 820 x 1220 mm more
is controlled with 24 or 220 Volt via solenoid valve
Hose in hose system. Oil and air are led separately to the nozzle. Thus constant supply.
No mechanical parts, therefore insensitive and safe operation over many years.
Dimensions housing 300 x 200 x 120
Picture shows solenoid valve. If it no longer closes, because dirt has accumulated in the line, unscrew the solenoid and clean it. This is the cause of 99% of the faults. more
Falkenstein diamond contour wire saw
- Year of construction: 1996
- 3 kW
- depth: 90cm
- width: 80cm
- height: 200cm
- Table: 45x100 rolling table
- 2x table swivel and rotation
- Pivoting table diffuser: 48mm
Good condition fully functional can be inspected and tested on site.
Shipping also abroad.
Basically I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please ask questions before... more
A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position.... more
automatic circular saw Scheer FM 14-1310
- Cutting width: 1310 mm
- Cutting height: 110 mm
- Saw feed: adjustable
- Pre-scoring device
- Total power: 7.5 kW
- Space requirement (W x D x H): 3.8 x 2.6 x 1.5 m
- Mash. Weight: 1950 kg
- Condition: very good
2010 completely overhauled, new PLC, scribble device, cutting length 1310 mm, cutting height max 110 mm, cutting length switchable halfway more
Automatic cutting line PEDRAZZOLI BROWN SCL 102/2 F 4.5
for iron and stainless steel
Year 2001 "EC
Used in very good condition
Video operation on request
Gear head with variable speed drive
Cutting capacity :
Round tube 90 mm
Square tube 67×67 mm
Rectangular tube 100×50 mm
6500 mm beam loader
Maximum unloaded rod length : 4500 mm
Disc diameter 250-315 mm
Installed power 7.8 + 3 Kw more
A German built and designed crosscut saw with a facility for the easy cutting of angled or straight components. A unique feature of the machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Although compact in design the machine gives large cutting capacity.
Precision ball bearing movement on hardened steel runners.
Sturdy cast iron construction with steel base stand.
Spring return of sawcarriage.
350mm m... more
Pipe Hacksaw Startrite
Saw blade diameter: 400 mm
Saw capacity: 150 mm round
- Plastic pipe
- Pneumatic pipeclamp
Country of origin: Netherlands
Motor power: 2,2 kW
Machine weight: 750 kg more
pipe cutting and chamfering machine make GF FISCHER, Solingen type RAe 4
Make # 42410661 Year of manufacture 2000
for material black and galvanized steel pipes
copper, brass, plastic
Range 20 - 118 mm
R 1/2 - R 4
wall thickness 8,0 mm
Speed 150 - 270 rpm:
electrical connection 1600 W, 200-240 V, 8,8 A
Outside dimensions 600 x 500 x 1300 mm
Weight 70 kg
- Clamping plate
- Work stand
used, in good condition more
Industrial Duty upstroke crosscut saw, for cutting aluminium sections, With oilpneumatic upstroke movement and horizontal and vertical pneumatic clamps. The machine is fitted with a 400mm TCT saw blade, with manual angle setting + / - 20 °. The cutting area is completely enclosed. There are various optional extras available such as roller tables with length stop.
Oilpneumatic upstroke of saw blade
400mm TCT saw blade
2.5 hp saw motor
Spray mist blade lubrication system
2 x vertical clamps
2 x ... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.