Bandsaw

MACC SPECIAL 411 CSO

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. - Vertical rotation on pivot with adjustable conical bearings without backlash Ksdpjficb Tsfx Aqvjdl - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable stop for cuts of the same size - 24 V low voltage system - 0.06 kW electric pump for belt cooling - Pedestal with drawer for chips collection and extractable tank for the cooling liquid - Machine predisposed

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Kedpfx Aqsyh Nfuevodl Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. Kodpfx Aqjqvm Ukjvsdl - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: used, Year of construction: 2007, functionality: fully functional, Machine for drilling holes for dowels URBAN DB 3100, year 2007 Condition: very good - Profile clamping system and drill feed operated by foot switch - Electric drilling motor switches off automatically at the end of the drilling process - Drill feed speed and drilling depth individually adjustable Kdodpfjwinq Njx Aqvol - Quick-clamp chuck for standard drill bits up to max. Ø13mm - Left and right support tables

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm Kdsdpfx Asd Iipxjqvjl band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: good (used), Year of construction: 2001, Separator TEBA 240 DG Round 240 mm Rectangular 230 x 230 mm Motor 1,5kW Kodpfeu Ekw Nsx Aqvedl Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saws 90° / -45° / +45°/ +60° Cutting speed: 40/80 m/min.

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Kdodpeufgnzsfx Aqvel Table size 1000x630mm

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Kdsdpofxpbmjfx Aqvjl

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested. Kdedpfeul Svlex Aqvol

Condition: excellent (used), Year of construction: 2008, Voortman V613 / VB750 CNC Drilling / Sawing Line – Year 2008 Rotating Spindle. 19 metres In-Feed. 12.5 metres Out-Feed. Roller Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity. Kdedpfx Ajv U Ebwoqvsl