Multi-spindle drilling machine

Maggi Engineering Boring System 29

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Tsdpfxszkmqzo Adwjc Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar Tedpenxkm Esfx Adwsc

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T68109, functionality: fully functional, power: 4 kW (5.44 HP), cutting width (max.): 1,000 mm, saw blade diameter: 315 mm, cutting length (max.): 3,200 mm, F25 basic equipment - Manual height and tilt adjustment 0–46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) at one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm Tjdpfx Aewwv Rmjdwjc - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package type 6 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,000 mm - Riving knife with extraction - Preparation for scoring unit

Condition: used, Year of construction: 2004, functionality: fully functional, number of slots in tool magazine: 7, spindle motor power: 6,600 W, 3 AXIS machine Vacuum pump 100 m3 Electrospindle 6,6 kW motor power Routing unit + Saw aggregate Drilling unit 10 +4 (10 vertical + 4 horizontal) ISO 30 router chuck Manual lubrication Monitor 15" Tjdjwhvwnjpfx Adwjc XILOG PLUS Software Windows XP Machine is still working at Sellers, video of machine in working mode available on request

Year of construction: 1996, condition: excellent (used), Automatic slotting machine with two oscillating tables BALESTRINI 2CAP Maximum length of the groove 120 mm Maximum recess depth in mm 80 Spindle speed 9000 rpm Spindle motor 3 Hp Oscillating motor Hp 1 Todpfsgmucpjx Adwec Pneumatic clamp for the workpiece Overall dimensions: mm 1000 x 900 x 1250 Weight kg 500

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Tedpfx Aev Hm Nmjdwoc Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Todpfx Adsh Txmtswjc Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm

Year of construction: 2021, condition: new, NIVEAU - Lifting table HS 300 midi with SCHWENKMAX - Plate swiveling device description: Tedpfob Irfcox Adwjc ᐳ mobile single scissors lifting table with plate ground frame and 4 drilling holes to receive the socket pins; 4 pieces of guide rollers, 2 of them with brake; Ø of rollers: 125 mm; operation on foot pump; load in kg: 300 weight in kg: 85 stroke in mm: 610 height in mm: 400 overall height in mm: 1010 sizes of platform in mm: 1200 x 740 Inclusive ! Schwenkmax - Plate swiveling frame with 2 layers of lock (vertical/horizontal) for plate weight up to 120 kg The swiveling frame can be mounted on the base frame of the HS 300 midi with a few simple steps. Even large boards can be rotated by this quipment from one person with no effort from the vertical to the horizontal position. Size of swiveling frame 1800 x 1480 mm Further optional available Accessories : * work plate beech tree Multiplex, 30 mm thick * wooden breadboard made of beech tree Multiplex, 30 mm thick

Condition: refurbished (used), Year of construction: 2018, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, feed rate X-axis: 20 m/min, actuation type: electric, total length: 6,200 mm, overall weight: 3,100 kg, Tornado+ – Fully Refurbished / AS NEW Spray devices GS, RS optional, texture finishing possible Joining, gluing, edge banding, flush trimming, radius milling, corner copying AKF, scraper blade R1/R2 with foil function on unit 1 Belt overlay / Synchro-Flex PUR gluing included in the basic equipment Workpiece dimensions: Width, minimum: 70 mm Height, minimum: 8 mm Height, maximum: 60 mm Length, minimum: 150 mm Panel thickness: Max. 60 mm Edge thickness: Tjdpfx Aozkk Drjdwec 0.3 – 15 mm -CM – CombiMelt gluing system Modular design for easy replacement of the pre-melting tanks. Suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Any type of adhesive can be processed with all working parameters (such as dispensing quantity, pre-melting and working temperatures) via individual work programs. -Individual inverters with full flexibility for individual activation of the individual processing motors via a power bus system. Special feature: Machine with speed package! 20 m/min with corner copying!! Tools and chain plates – NEW Sale of the machine with warranty possible. Inspection and demonstration possible at any time by appointment.

Condition: used, Payload: 0/4 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 250 Kg Mounting: Floor Tedpfeh Au Inox Adwjc