Thickness planer

Martin T44

Condition: used, Year of construction: 2001, Working width: 630 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Nwedpfxozq Dcns Afuol Thickness display: digital display Feed rate: 6 / 12 m/min Infeed roller: rubber Outfeed roller: rubber Table rollers: no Motor power: 5.5 kW Dust extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. Nsdpozp Edwofx Afujwl All specifications according to the manufacturer.

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Nwjdpfx Ajw Ad Rrofuel Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Nwodpfjidqphex Afujl Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Nsdpfxscr T N Ds Afuswl Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: new, Year of construction: 2025, operating hours: 8 h, functionality: fully functional, conveyor belt width: 900 mm, conveyor belt length: 18,320 mm, discharge height: 8,320 mm, motor manufacturer: Caterpillar, Belt length / width: 18,320 / 900 mm Cat C1.7 engine: output 36 kW at 2,800 rpm Conveying capacity: approx. 400 t/h Nsdpfxow Hccne Afujwl Discharge height: 8,320 mm at 22.5° incline Belt: hydraulically retractable and extendable Height adjustment: hydraulic Remote control: wired remote Crawler undercarriage length: 1,800 mm with 400 mm track plate

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connection value: 380V, 1.85kW, 4.8A Length of pressure bar: 3100 mm Pneumatic material clamping with manual lever valve Chassis Stop guide, 520 mm long 6x support brackets Nwsdpjh U Dbrsfx Afujl

Condition: excellent (used), Siemens Simatic 6AV7872-0BC12-1AC0 Touch Panel PC Touch 15" 677B Series P6 Njdpfxed I Huzj Afuowl 6AV7872-0BC12-1AC0 Touch 15" Panel PC 677B Vers. 03 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Used screw conveyor, diameter 600mm, length 6,000mm, fully made of stainless steel (excluding the drive). Nwedpfezqa Itsx Afuol The guard is missing some bars.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Nwjdpfx Aozwpvaefusl Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.