Miwe Condo 4-6080

Miwe Condo 4-6080

Condition: like new (used), Deck oven with 4 decks and proofing cabinet Dcodpfx Ajxulhyofnec Manufacturer: Miwe Model: Condo CO 4.0806 2D With 4 shelves each 80x60cm max. temperature: 320°C Shelf entrance height:13cm With proofer With exhaust air bonnet and steam condenser Year of construction 2013 Power: 18.9kW Voltage: 400V / 50Hz External dimensions: 110x115x210cm

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm Dcjdpfxjhzbipe Afnoc - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), functionality: fully functional, Spiral dough mixer Kemper SP 30L Dcsdpfx Afjwnukyonsc Spiral dough mixer Brand Emil Kemper GmbH Type SP30L Voltage 3-phase 380V 16A The SP30L mixer uses the principle of mixing in three zones, which ensures even aeration of the dough, improving its structure and quality. This makes the device perfect for preparing a variety of dough types

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Lillnord fermentation retardant Maryline Model: KR 103-81 T Touch screen computer control Temperature range from max. -3°C to + 45°C Humidity from 60% to 90% RH for max. 30 trays 600 x 800 mm Dcedpfx Ajk Iti Nsfnoc or 60 trays 600 x 400 mm Cooling unit ready to plug in above Coolant R 134A / cooling capacity 803 watts PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 4000 Watt, 10A, 16A-CEE plug Dimensions: 810 x 1030 x 2290 mm, WxDxH New device Option: - Door with thermal window - CO2 vaporizer - FlexBaker with ready-fermented products - Aggregate external Lillnord service partners

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Dedpfx Afodnxydsnjcc Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: good (used), warranty duration: 6 months, Spiral mixer Diosna SP 80 - used - capacity 80 kg of dough (approx. 50 kg of flour) - manual control - 2 gears - 2 timers - bowl guard - on wheels - stainless steel bowl and spiral - machine after renovation Dedpfx Aewrawajfnecc - 6-month warranty - collection from the warehouse / shipping option - price on request

Year of construction: 2004, condition: excellent (used), The Multivac R230 packaging machine is an advanced machine used mainly in the food industry for packaging a variety of products such as meat, cheese, seafood, delicatessen and many others. This machine is designed to create thermoformed packages, using vacuum to maintain the freshness and quality of the packed products. Equipped with a Busch RA 0100B vacuum pump and constructed of stainless steel, the Multivac R230 is designed to work with a film width of 320mm and has features such as various forming and cutting configurations. Its use is common in many branches of the food industry, from bakeries to meat and fish processing. Djdpfx Aevzt Hujfnscc

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Dcjdpfx Aot Hwupefnsc Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Dcodpetxh Niofx Afnoc

Condition: like new (used), Wiesheu EBO Stonefloor Oven for more information please sent an request Dodpeumm H Isfx Afnecc