Vertical machining center

Mori Seiki VS10000

Condition: good (used), Year of construction: 2011, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Technical data: Control: Mazatrol 640M Travel X – Y – Z axis mm: 1740 / 760 / 660 Rapid traverse X – Y – Z axis m/min: 36 / 36 / 36 Table Table size mm: 2000 x 760 Table load capacity kg: 1,400 Distance between table surface / spindle nose mm: 160 – 840 Gkedpfx Aowpu Hdeh Eed Main spindle Speed min-1: 12,000 Main drive power (5 min. / 30 min.) kW: 18.5 / 11 Automatic tool changer (ATC) Number of positions / spindle taper: 30 / SK 40 Max. tool diameter mm: 80 - with free adjacent positions mm: 110 Max. tool length mm: 350 Max. tool weight kg: 8 Machine height mm: 3442 Installation area mm: 4435 x 3300 Machine weight kg: 11,500 Accessories: Relocation detector Automatic tool length measuring system Preparation for partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar Chip conveyor

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device Gsdpfx Ahjwlvi Ej Eskd

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm milling spindle motor: 67,4 ( s1/100% ) kW Gkjdpoway I Uefx Ah Ejd max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Godpfx Aouni D Eeh Eskd Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2016, x-travel 1270 mm y-travel 650 mm z-travel 610 mm table surface area 1400 x 650 mm control Fanuc Oi MDF rapid traverse 36 m/min table load 1,0 t turning speed range 12000 U/min power capacity - milling spindle 15/25 kW max. torque on the spindle 118/159 Nm no. of tools in the magazine 48 Stück internal coolant system feed 20 bar tool taper SK 40 + Big Plus weight of the machine ca. 9,0 t dimensions 4,45 x 3,3 x 3,24 m CNC- vertical machining centre with internal coolant. First installed in 2017 - coolant through the spindel 20 bar Gjdpfx Ajuhrdgeh Eskd - 1x external chip conveyor - 2x internal chip conveyor - rigid tapping - Big Plus spindle - air through the spindel - external hand weel - coolant gun - USB and network connection

Condition: used, Year of construction: 2006, Control: MSX-850III Gsdpfx Ahewg Egvs Ejkd Travel: X-260 mm, Z-1,345 mm; max. turning length: 1.298 mm turning diameter: 356 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Rod diameter: 80 mm Rapid: 30 m/min Spindle speed: 4,000 rpm Spindle motor: 18.5/15 kW tool turret: 12 powered stations Drive power AGW: 5.5/3.7 kW Speed driven tools: 6,000 rpm programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 Gkedovtnm Hspfx Ah Eod T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: excellent (used), Year of construction: 2024, CNC MECOF 2 PCS . YEARS OF MANUFACTURE 2005 AND 2007.They are in very good working condition. Gjdpst E Nynefx Ah Eokd

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Gkodpfx Aet E Hvgeh Esd Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, Manufacturer: SORALUCE Type: TL-25 Control: HeidenHain TNC 430 Year of manufacture: 1998 Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package Specifications Metric US Standard X-axis 2500 mm Y-axis 1000 mm Z-axis 1600 mm Table length 2860 mm Table width 1000 mm Table load 7500 Spindle power 25 kW Spindle speed 0 - 3000 rpm Tool holder 50 ISO/Bt/Mk X-axis feed 10000 mm/min. Y-axis feed 10000 mm/min. Z-axis feed 10000 mm/min. Milling head auto index 2.5 x 2.5° Working hours 12500 H Gkodpsv Idaljfx Ah Eod Dimensions (estimate) Length 6000 mm Width 3500 mm Height 3500 mm Weight 15000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.