Multisaw

MRS 350

Year of construction: 2008, condition: excellent (used), Oil burner Weishaupt WM-L10 Year of manufacture: 2008 We also speak Russian! Viewings by appointment only. Preference is given to sales to dealers, commercial businesses, or for export. All information is provided without guarantee and subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We will gladly purchase your used boiler or burner! Nlodoi Ap Atopfx Akaec Of course, we will also take care of all formalities. Loading is possible.

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles Nljdporigxyofx Akasc feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW Nljdjwvqklspfx Akaoc • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 Nsdpfoyna Ezsx Akaelc - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, Filter for extraction of dust and sawdust. Njdstzld Uspfx Akaelc

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Nodpfxjfxpbms Akaolc

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Nljdpfjlxyhfsx Akaec Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Nljdpovu U Itsfx Akaec Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm Nsdjtkt Tpspfx Akaslc • Extraction hood above the machine

Condition: excellent (used), Year of construction: 1998, I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 Nlsdpsfzzhyjfx Akaec 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !