Used 3D Probe for sale (2,830)

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Knedjwc Sxdspfx Agzjf Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F170, Year of construction: 2018, operating hours: 2,732 h, Rarely used fully functional 3D Printer Washing unit for cleaning of soluable support material included Kjdpfx Aoxhbxzsgzenf

Condition: excellent (used), functionality: fully functional, operating hours: 1,978 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: three-phase, overall weight: 227 kg, input voltage: 230 V, 🎯 For Sale: Stratasys F270 3D Printer – Professional, Excellent Condition 🔧 Type: FDM 3D Printer 🏢 Make & Model: Stratasys F270 📍 Location: Anzegem, Belgium We are specialized in the design and printing of moulds for automotive products. ✅ Technical Specifications • Build Volume: 305 x 254 x 305 mm • Print Materials: ASA, ABS-M30, PLA, ABS-CF10 (carbon fiber), TPU 92A • Layer Thicknesses: 0.127 mm / 0.178 mm / 0.254 mm / 0.330 mm • Support Material: Hands-free soluble & breakaway • Colours: Up to 11, including black • Software: GrabCAD Print • Material Feed: Automatic change-over between trays Kodpfx Ajxnz Hrogzjnf • Model & Support Material Channels: 2 & 2 • PC Requirements: Windows 10 & 11, app for Apple & Android • Network: Ethernet TCP/IP, Wireless IEEE 802.11n/g/b • Machine Dimensions: 1626 x 864 x 711 mm • Weight: 227 kg • Power Supply: 220–240V, min. 7A • Safety Certifications: CE / FCC / EAC / EMC / TUV / RC / RCM / RoHS / WEEE / Reach 🧰 Included • 2 print heads included: 1 print head for model material, 1 print head for support material, both

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: documentation/manual, type plate available, 3D SURFACE MEASUREMENT SYSTEM FOR 3D SURFACE INSPECTION IN THE SUB-MICRON RANGE MikroCAD software with MountainsMap® technology Kjdjx Ebmtjpfx Agzsnf Comprehensive scanning, analysis, and reporting software The MikroCAD software combines hardware scanner integration, exposure adjustment, and live video feedback with MountainsMap® 3D analysis, visualization, and reporting to provide a seamless and efficient user workflow. With MikroCAD, you can capture crucial surface information in the sub-micron range for a wide variety of applications. MikroCAD delivers detailed surface scans and analysis using industry-standard measurement tools, as well as reporting with effective visualization.

Condition: like new (used), functionality: fully functional, machine/vehicle number: SG79434002, Year of construction: 2019, operating hours: 1,090 h, (English below) A very well-maintained HP MJF 4200 machine is for sale. Only PA12 was printed with it. This machine has only 1090 operating hours or 68 full build jobs (verifiable) on the clock. During operation, there was always an active HP service contract. This means all parts/problems were immediately resolved directly by HP. Since the machine is no longer in use (we have a newer version of this machine), there is no longer an active service contract with HP. The machine is connected to power and can be started. Print heads/powder/agents are not included in the offer, but can be obtained through us. If you have never worked with HP machines, we will be happy to help, as we have a lot of experience. The sale includes the printer + processing station + 2x build unit. This allows 24/7 printing. Kedpfx Agsrg Dv Ajzsnf Pickup must be organized by the buyer or HP. We are happy to help with packing. All equipment can be viewed in Vienna. 3D printer + processing station + 2x build unit.

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality Kjdpfx Agjxwvqqjzonf • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Ksdou Ebufspfx Agzonf Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,504 h, Equipment: ABS, compressor, Printer is fully functional and it is still under power. Printer was not used much often only 1504 working hours There are available all model materials licences available in 2019. Knjdpfow Imk Rex Agzjf New PM Kit is on site and it will be installed just before printer dispatch to the new customer Support removal unit type EFT-900 is available

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362931, Year of construction: 2023, total length: 265 mm, total height: 300 mm, total width: 330 mm, overall weight: 12 kg, input voltage: 220 V, power: 0.05 kW (0.07 HP), The DWS UV Curing Unit S2 is a professional post-curing solution specifically designed for SLA 3D printers, developed by the renowned Italian manufacturer, DWS. This S2 model is equipped with a high-efficiency UV light source, ensuring consistently even heat and light distribution for reliable, repeatable curing performance. Its robust UV intensity and precision allow for rapid, fully automated curing of printed objects within minutes. The DWS range also includes the M and XL curing units, which offer different curing chambers and capacities for various production needs. The S2 provides the most compact curing volume in the DWS lineup, ideal for single-part polymerization. It features a programmable timer (up to 30 minutes), enabling users to precisely control the curing cycle. Its intuitive controls, user-friendly interface, and compact footprint make it especially suitable for professional environments with limited space. The S2 also prioritizes user safety with practical features such as a secure automatic door lock and forced internal ventilation for heat management and operator protection. Purpose-built for professional SLA 3D printing workflows, the S2 serves as a crucial post-processing unit for models produced on DWS SLA printers. After initial printing, models require additional UV exposure for complete polymerization and structural stabilization. This secondary curing step not only enhances surface finish and smoothness but most importantly, ensures long-term durability and mechanical resistance. Curing Volume: The S2 offers a chamber measuring 160 x 160 x 160 mm (6.3 x 6.3 x 6.3 in), optimized for single part curing and effective polymerization. Controls: Operation is straightforward with a standard on/off switch and an integrated timer allowing settings up to 30 minutes, sufficient for the majority of SLA post-curing applications. The unit features a robust, white exterior with a pink-tinted transparent door, combining an aesthetically pleasing design with ergonomic convenience. Its compact size and professional appearance make it well-suited for a range of industries, including prototyping, small-batch production, jewelry manufacturing, dental labs, automotive repairs, and aerospace applications. Technical Specifications: - Curing volume: 160 x 160 x 160 mm Ksdpfex Ehfpjx Agzenf - Timer range: 0–30 minutes - Forced internal ventilation - Internal dimensions: 216 x 266 x 219 mm - Manufacturer: DWS, Italy - Safety door mechanism: Yes - Light source: UV LED - External dimensions: 265 x 300 x 330 mm - Power consumption: 50W - Power supply: 90–264V / 50–60Hz - Weight: 11.8 kg Price: The DWS UV Curing Unit S2 is priced at $1,990.00, reflecting its advanced curing capacity, professional feature set, and operational efficiency.

Condition: used, functionality: fully functional, machine/vehicle number: S/N 1710S902, Year of construction: 2017, total length: 1,800 mm, total height: 1,520 mm, total width: 1,050 mm, 60kg of Extrudr Greentec Pro filament 2.85mm is included. Kjdpfx Agex Atytjzenf

Year of construction: 2022, condition: like new (used), functionality: fully functional, Quality scanner for glass, 2700 mm VIPROTRON Quality Scanner 3D Year of production: 2022 Quality scanner for glass With the Quality Scanner 3D you automate the monitoring of your glass quality at the highest level. The extremely effective quality control system with up to three different camera/illumination arrangements (brightfield, darkfield and reflection channel) is integrated directly after the washing machine in order to rule out pseudo errors. Each individual channel is focusing on specific types of defects, which are optically detected differently. The data comparison of the three channels enables a level of accuracy in defect classification that cannot be achieved with single-channel systems. Working height: 2700 mm For mounting on vertical glass processing or insulated glass production machinery Complete set-up ready for installation More technical information can be found attached as Tech. data file Kjdpfx Agex Eczfjzjnf Excellent condition Very little used, as new As is Available immediately

Condition: like new (used), Year of construction: 2018, operating hours: 4,918 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: TOYOTA LPE 200 * EX * Pyroban 3D / Zone 22 * ID:24090.5905 Category: Used Forks: 1150 x 570 mm Knodpfx Ajxz Udqjgzof Capacity: 2000 kg Year: 2018 Hours: 4918 hours Battery: 24 V / 344 Ah - NEW - Year 07 / 2025 Options: * EX * ATEX - Pyroban!!!! Gas group = IIIB Type = 3D ( permitted in ZONE 22 ) Temperature class = T4 ( 135°C )

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Ksdpfxou Ebv Ae Agzenf Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: used, Used Renishaw MP3 touch probe Tool taper MAS BT 50 Kedpfx Ajxu D Skegzjnf

Condition: good (used), power: 213 kW (289.60 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 6,326 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: DL08P Empty weight: 36.200 kg Functional Knedpfxjxuz Iij Agzef CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCECEBEH1020055 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,3x3,5x3,4 Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 7,508 h, 💡 Unique Opportunity – Showroom Machine from Official Dealer This machine comes from the demonstration showroom of a former official Markforged and DWS dealer who operated in the Italian market until 2025. It was used exclusively for demonstration purposes, maintained in excellent condition, and has very few operating hours. Now available through 3D Machineries Srl, this represents a rare opportunity to purchase an almost new industrial 3D printer, at a fraction of its original cost – with immediate availability and full transparency on provenance and usage. Knedpswzmgtofx Agzef -----LISTING DESCRIPTION----- Markforged – Complete Metal X System for Metal 3D Printing (Printer + Wash + Sintering Furnace + Accessories) 💰 New value over €200,000 For sale: complete Markforged Metal X system for metal 3D printing, including all necessary components for in-house metal part production using the bound metal printing process (FFF technology + debinding + sintering). ✅ The system comes from a showroom and is in excellent condition. Sale of individual components also considered. The package includes: 🔹 Markforged Metal X 3D Printer 🔹 Markforged Wash-1 – Debinding unit for binder removal 🔹 Markforged Sinter-2 – Industrial sintering furnace 🔹 Argon gas control panel – with reducers and quick couplings 🔹 Original Markforged case – with spare build plates 🔹 Mobile wheels for machine handling 🔹 Isolation transformer Key technical data: Printer model: Metal X (F-PR-5101) Sintering furnace model: Sinter-2 (F-SR-0002) Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Furnace power supply: 200–240 V AC 30+PE | 347–415 V AC 30+N+PE / 30 A Certifications: CE, FCC, UL, RCM, UKCA Assembled in the USA ✅ The Metal X system enables printing of stainless steel components (17-4 PH, 316L), pure copper, Inconel, and tool steel ✅ Ideal for machine shops, R&D departments, prototyping centers, and companies in the aerospace and automotive sectors 💡 The new value of the complete package is over €200,000. 📦 Option for separate sale: printer, wash unit, sintering furnace, accessories. 📩 Contact us to receive a detailed price list, images, videos, usage hours or to schedule an inspection.

Condition: used, Year of construction: 2023, operating hours: 85 h, load capacity: 200 kg, lifting height: 11,950 mm, construction height: 2,160 mm, fuel type: electric, drive type: Elektro, Articulating Boom Lift CE certificate, Ground clearance (access): 0.40 m Platform height: 9.95 m Maximum lateral outreach: 7 m Knjdpfxsw Tn Ego Agzef Overhang / Articulation point: 6.40 m Jib rotation (left / right): 70° / 70° Basket rotation angle (up / down): +70° / -70° Platform basket load capacity: 200 kg Superstructure rotation: 355° Basket rotation (right / left): 66° / 59° Number of persons (indoor / outdoor): 2 / 2

Condition: like new (used), Year of construction: 2016, operating hours: 570 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,670 mm, Manufacturer + model:STILL EXV 14 * EX * Miretti - 3D / Zone 22 Mast:2F2350 ID:23121.4034 Knjdpfx Agexz Tzuezof Cat.:Demo Mast:2F2350 Lowered height:1670 mm Lifting height:2350 mm Capacity:1400 kg Year:2016 Hours:570 hours Capacity:24 v / 375 ah - NEW - Bj 11 / 2023 Options:* EX * MIRETTI !!!!! System = Miretti AR 16 ATEX 015 Gas group = IIIB Temp class = 266*C Type = Cat 3D ( permitted in ZONE 22 ) POWERSTEERING complete LIkE NEW !!!

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Kedownpbgepfx Agzsnf Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SP0119240003037, Year of construction: 2019, input voltage: 240 V, Equipment: CE marking, Bound Metal Deposition™ metal 3D printing system composed of: - printer - debinder - sintering furnace - frequency converter for 60Hz furnace power supply. Ksdpfoxlcldox Agzenf System in perfect condition, used for R&D in a climate-controlled environment. Printer equipped with 2 nozzles (0.40mm diameter) and one high-definition nozzle (0.25mm diameter). Furnace equipped with a technical gas supply system from an external installation. Set of original replacement parts for furnace (ceramic setters, graphite retort shelves, gaskets, filters, vacuum pump oil). Firmware updated to the latest release throughout the system. Material cartridges included: 1x AISI 316L 1x 17-4PH 1x ceramic support

Year of construction: 2025, condition: new, new PMH filament line extruder 30 mm - 28 l/d with noozle for 3D-filament with cooling tank with blow-up system for adhesive water with Laser control system (option) Knjdpfx Agech Sfqezef with puller with filament accumulator (option) with winder and traverse guide MADE in GERMANY

Condition: new, More technical data on request Knsdsd Aca Dspfx Agzof

Year of construction: 2009, condition: excellent (used), The Objet Connex 500 is Objet's groundbreaking 3D printer for multiple materials. 500 x 400 x 200 mm in size, designers and engineers can quickly create prototypes to simulate the intended end product closer than any other technology. What's unique about Objet Connex? With Objet's patented simultaneous multi-material spray technology, the Objet Connex 500 can print models of up to 14 different materials in a single print job.The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™.It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics.Outstanding Productivity The Objet Connex 500 offers:- Multi-Material Models - No need to design, print, and glue separate model elements- Different parts- Multiple materials models - No need to design, print, and glue separate model elements- No need to design, print, and glue separate parts- No need to select your own materials to effectively highlight different material components in complex or composite products. Different materials. Same compartment - saves time and meets multiple requirements simultaneously - Excellent 16 micron high resolution pressure accuracy - 600 DPI X Ksdod Sukxjpfx Agzonf

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Knsdpsqzgvaofx Agzef Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Knjdpfsivpdwox Agzjf Further questions we can answer on the phone for you.