Used 4 Axis Cnc Milling Machine for sale (96,056)

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing Ltedpfexz Aygex Agzsa * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz Ltjdpfx Agjw Nklhjzja - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) Ledpfxsvpalas Agzeta ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual Ltedjtvmtkopfx Agzja

Condition: good (used), Year of construction: 2004, weight max. 1,5 t weight of the machine ca. 400 kg Accessories for a 4th axis machining center Ljdsxylq Sopfx Agzeta used on a HEDELIUS machine

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Lsdpelfc U Djfx Agzota RAL5008 grey blue Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: C105253, 3-axis milling machine 8 pneumatic clamps with auto, independ positioning 2x automatic toolmagazine for 2x 5 tools Ltjdpfxex Eytzo Agzsa

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 Ltsdpfxetrhq Ho Agzea CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: excellent (used), Year of construction: 2005, operating hours: 34,131 h, functionality: fully functional, machine/vehicle number: 592, total length: 3,500 mm, total width: 4,000 mm, total height: 3,200 mm, input voltage: 230 V, type of input current: three-phase, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2023, working width: 1,000 mm, working height: 750 mm, working length: 1,500 mm, Huber & Grimme P-T-F 15-10 – 5-Axis CNC Milling Machine with Full Enclosure: Working dimensions: 2x1500x1000x750 mm Machine & Equipment: -Huber & Grimme P-T-F 15-10 -Linear screw drive for all axis -Year of manufacture: 2005 -5 controlled axes -22 kW high-frequency spindle -Automatic tool changer -Siemens 840D -Servo drives on all axes -400 V / 50 Hz electrical system -Spindle type: HF 100 A 45 CKPV Included in the sale: -Full machine enclosure / safety cabin -Electrical control cabinet -Cooling unit and vacuum system (as shown) Applications: -Aluminium, plastics, composites, wood Ltjdpfx Agex Iffbozea -Model and mould making Machine is sold as a complete unit, including enclosure and electrical system, as shown in photos. Inspection possible by appointment.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Ltjdov Rxa Sepfx Agzoa Operating hours: 65,071 Control system: HEIDENHAIN TNC 426 Working range X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 – 6,300 rpm Tool holder: SK 40 M & H 3D probe (for part touch-off) Vertical-horizontal milling attachment Boring quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH) approx.: 3,900 x 2,000 x 2,000 mm

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Ltjdpfjhp Rc Iox Agzea Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: reconditioned (used), Year of construction: 1994, Universal tool milling machine Make: DECKEL Model: FP 4 MK Aktiv Year of manufacture: 1994 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2203-8668 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 Lsdpjfzbtmefx Agzjta - Universal table 660 x 380 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions -used, as seen-

Condition: new, The Holzprofi Maker CNC machine offers working dimensions of 2500 x 1300 x 200 mm, featuring a heavy-duty cast iron frame combined with a mechanically welded sheet metal frame. This CNC machine enables cutting, shaping, and engraving of a wide variety of materials, as well as the precise and efficient production of intricate designs and patterns. CE compliant, depth probe included in the delivery. Ltjdpfsx H Ukqjx Agzsa Advantages and Features: - Large workspace supports a wide range of applications, suitable even for larger workpieces - Compatible with many drawing programs thanks to G-code integration - Ball screw drive - Linear guides - DSP control cabinet ensures efficient and safe operation - High durability due to robust design with cast table and welded steel frame - Water cooling ensures quiet operation - Intuitive design for easy assembly and maintenance - Milling speed can be continuously adjusted even during operation, ensuring excellent results and long service life - Manufactured from special steel, ensuring maximum strength and durability - Suitable for end-grain milling Technical Specifications: Working dimensions (L x W x H): 2500 x 1300 x 200 mm Working height without legs: 750 mm Motor: 2.2 kW 230 V spindle, driven by frequency inverter Spindle: water-cooled Step motors: Nema 34 stepper motors for X, Y, Z, and A axes Repeat accuracy: ±0.03 mm Drive: X, Y, and Z axes driven by 2505 ball screws Control: PC-based control with handwheel A-axis mandrel diameter: 125 mm A-axis distance: 1200 mm Guide rail: 20 x 20 mm ground stainless rail with ball bearings Clamping system: ER20 collet with Ø 3, 6, and 12.7 mm sockets Footprint: 3050 x 2020 x 1600 mm Weight: 1,650 kg

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Ledpfx Agotvfpcszjta Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee.

Year of construction: 1999, condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Ltodpfjdk Rwnjx Agzea Gewicht der Maschine ca. / weight 6500 kg

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Lsdpjv Rpr Sefx Agzjta Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swiveling table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Ljdpew D Hmlefx Agzsta Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: like new (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Immediately available stock machine from our showroom in Trencin (SK). EMCOMAT FB 450 equipped with Siemens Sinumerik 828D control. DEMO machine in "AS NEW" condition, ready for immediate delivery. We are happy to prepare an individual quotation for you. Visit us to inspect and test the machine under power. Working range X450/Y350/Z400 mm Table size 800 x 400 mm Drive power 7/10 kW Stepless speed range 10–5000 rpm SIEMENS Sinumerik 828D Universal toolroom milling and drilling machine featuring the advanced Sinumerik 828D system and hydraulic tool clamping. Working range X450/Y350/Z400 mm Drive power 7/10 kW Spindle speed 10–5000 rpm Feed rate 10–2000 mm/min Rapid traverse up to 5000 mm/min Machining accuracy as per DIN 8615 Tool clamping: DIN 69871 SK40 Features: - Linear guides - Ball screws - Vertical milling head swivels +/-90° with 80 mm quill travel - Swivel device for vertical head - Hydraulic tool clamping - Coolant system - LED machine lighting - Rigid angle table 800x400 mm - Chip tray - Automatic central lubrication - Operating tools supplied - Documentation in Czech and English Ljdpfx Asxapdcegzeta - Sinumerik 828D available in Czech, German, and English - 15" multi-touch display - Includes control package for 3 axes with ball screws and servo motors - Machining cycles with graphical support: - Drilling, deep drilling, reaming - Thread cutting (with length compensation) on pitch circles and in line of holes - Rectangular and circular pocketing - Slotting cycle - Dwell cycle - USB interface, etc.

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Ltsdexx U Ecopfx Agzoa

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: Ltsdoxxpahepfx Agzsa 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Ltedpfx Agjwyit Hszsa Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2007, machine/vehicle number: 36585, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, table load: 1,000 kg, overall weight: 15,500 kg, input current: 55 A, input frequency: 50 Hz, 2007 Alzmetall CNC milling machine (with Kuka robot) The machine has been dismantled and is ready for loading. The card has been removed! Ltedswpu D Aspfx Agzsa

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity Ltedpfx Agsg U Uv Uszja cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: good (used), DECKEL MAHO 5-Axis Milling Machine DMU 50 eVolution Lodpfox Emxkox Agzeta - With probe - With handwheel - With several tools Good condition, fully functional, can be viewed and tested on site. Shipping also available abroad. Inspection: Please note that, to avoid misunderstandings, the item can gladly be inspected and tested under power before purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number provided below or above at any time. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Shipment via forwarding agent.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 600 Pcs./pcs. Spindle Speed: 20.000 RPM Max. Torque: 8.600 Nm Feed Speeds X/Y/Z Axis: 60.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed Lsdpfoxxn Ukex Agzsta - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.