Used 65 Y for sale (25,457)

Condition: good (used), Year of construction: 2016, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 593mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle, 12 Station turret, swarf conveyor, tailstock, tool setter, coolant, Nsdpjx Dk Ahefx Agzodf

Condition: new, Year of construction: 2025, machine/vehicle number: CAT0DE65CN7300532, fuel type: diesel, power: 52 kW (70.70 HP), motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 992 kg Functional Nodpfsukm Rusx Agzodf Generator capacity: 65 kVA CE mark: yes Other information Fuel consumption: 11.3 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Transport dimensions (LxWxH): 2,3x0,96x1,4 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, _____ Description: Year of manuf. : 2015 Control : Fanuc Turning diam. : 200 mm Turning length : 200 mm In General: Year of manufacture:2015 Control system:Fanuc 32iB Workpiece diameter max.:200 mm Workpiece length max.:200 mm Spindle: Technology:Motorised spindle Speed:4,500 rpm Power (approx.):22 kW Torque:256 Nm C-axis:0.01° Chuck:3-jaw chuck KNCS-N 210-52 Tool carrier (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 40 Tool drive:6,000 rpm, 8.5 kW, 40 Nm Ndsdpox Ih R Hsfx Agzef X-axis:760 mm Y-axis:60 (+/- 30) mm Z-axis:415 mm Workpiece storage: Technology:Drag frame conveyor/pick-up Workpiece quantity (max.):20 pieces Workpiece height (max.):200 mm Workpiece weight (max.):20 kg Equipment: Chip disposal:Chip conveyor Coolant supply:High-pressure pump with filter Workpiece measurement:Measuring probe Driven tool holder:4 pieces Static tool holder:8 pieces Chuck:3-Jaw chuck KNCS-N 210-52

Year of construction: 1998, operating hours: 1,339 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series 18i-T Main Drive Number of axis 4 Ndsdpfx Aox D Itwjgzof Spindle Speed 4000 RPM Tool taper VDI 30 This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Hainbuch TOPlus Kombi Axzug 65 3155011 / A073923.0000C clamping chuck, used, in good condition, 100% functional, delivery as per photos. Ndjdpfx Aox Erq Ssgzef

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 C Ndodexuwxwjpfx Agzsf Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1230 mm Worklenth without magnetic table: 1260 mm Grindingwidth: 600 mm Longitudinal travel X-axis (autom.): 1260 mm Cross-travel Y-axis (autom.): 630 mm Travel Z-axis (autom.): 477 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 406 x 50 x 127 mm Spindlespeeds: rpm Motorpower: 22 kW Cooling system: yes

Condition: excellent (used), mileage: 353,500 km, power: 133 kW (180.83 HP), first registration: 06/1994, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x4, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 200 l, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro2, suspension: steel, loading space length: 4,000 mm, loading space width: 2,400 mm, loading space height: 800 mm, Year of construction: 1994, Equipment: crane, differential lock, = Additional Options and Equipment = - 8-speed manual transmission - Heated mirrors - Leaf spring suspension - Comfort driver's seat - Differential lock - Speed limiter - Hydraulic system - Radio/CD player - Rotating beacons - Sun visor - Power take-off (PTO) = Notes = HEAVY DUTY DAF FA65-180 ATI (EURO 2) 4x4 FULL STEEL TIPPER & PALFINGER 9001A CRANE WITH MANUAL GEARBOX, STEEL SUSPENSION!! 180HP, EURO 2, 6-CYLINDER ENGINE!! (NO ELECTRONICS, MANUAL PUMP & INJECTORS) ZF 8-SPEED MANUAL GEARBOX!! FULL STEEL SUSPENSION!! DIFFERENTIAL LOCK!! P.T.O!! SUNVISOR!! ETC.!! 3-WAY FULL STEEL TIPPER BODY, DIMENSIONS: LENGTH x WIDTH x HEIGHT 4.00 M x 2.40 M x 0.80 M (Approx. 9m³)!! PALFINGER 9001A CRANE WITH 2 HYDRAULIC EXTENSIONS!! TRUCK IS IN GOOD WORKING AND DRIVING CONDITION, READY FOR HEAVY CONSTRUCTION JOBS!! MORE DAF 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,242 cc Transmission Transmission: 8-speed manual gearbox Axle Configuration Tire size: 295/80R22.5 Brakes: Drum brakes Suspension: Leaf springs Front axle: Differential lock; Max axle load: 6,500 kg; Steered; Tire tread left: 30%; Tire tread right: 30%; Reduction: single reduction Rear axle: Twin tires; Differential lock; Max axle load: 11,500 kg; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 30%; Tire tread right outer: 30%; Reduction: single reduction Weights Empty weight: 8,600 kg Payload: 10,400 kg GVW: 19,000 kg Functional Lifting capacity: 9,000 kg Crane: PALFINGER 9001A (2 hydraulic extensions) PK9001A, year 1994, mounted behind the cab Body manufacturer: AJK FULL STEEL 3-WAY TIPPER Loading platform height: 135 cm Nsdpfsxa E Nzox Agzsdf Tipper: Rear Condition Technical condition: very good Visual condition: good Further information Please contact the Sales Department or Erik Engel for more details.

Year of construction: 2010, condition: used, Year of manufacture: Dec 2010 New: No 6 BANDEN 425/65 R 22.5 15 , 14 , 13 ,13 , 8 , 8 MM PROFIEL INCLESIEF 10 GAATS VELG Nedsx Ng Imspfx Agzjdf

Condition: excellent (used), Year of construction: 2004, MAZAK QUICK TURN NEXUS 200MS-Y Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol 640T Nexus - KITAGAWA three-jaw chuck BB-208 for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder Njdpsw Du S Aofx Agzjdf - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm Nsdpfshvan Isx Agzjdf cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Hainbuch TOPlus Kombi Axfix size 65 chuck 2903, used, in good condition, 100% functional, delivery as per photos. Ndedpox Erq Ejfx Agzsf

Condition: used, Year of construction: 2008, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 77 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, total height: 1,680 mm, total length: 2,848 mm, total width: 1,860 mm, overall weight: 5,400 kg, CNC Lathe with Y-axis, driven tools, sub spindle and Gantry Loader CNC Control Mazatrol Matrix Nexus Turning diameter 276 / 380 mm Spindle bore diameter 77 mm Spindle speed 4000 R/min Spindle motor 26 Kw Movement X-axis 230 mm Movement Y-axis 100 mm Movement Z-axis 575 mm Movement W-axis 585 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper Mazak VDI Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 4.500 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Nodpox Dcbpefx Agzjdf Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. Ndsdpfx Agsv D Nutozef -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: used, fuel type: diesel, first registration: 05/2018, Year of construction: 2018, operating hours: 1,607 h, 1607 operating hours – New tracks – Crawler excavator 6553 kg – Quick coupler system – Additional rotation functions – Air conditioning – 36.4 kW engine – Dozer blade – Nodpfxjxxgzis Agzedf = Further information = Drive: Crawler Unladen weight: 6,553 kg Reference number: 86 Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig + B- en C-as Nodpfx Agoxbukwozedf hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) centraal smeersysteem Gereedschapswisselaar met 40 posities Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 36 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 15,000 h, Control Unit Brand SIEMENS Model Sinumerik 840D SL Main Drive Number of spindles 2 Spindle speed range 0 - 5000 min-1 Spindle motor power 29 kW Spindle bore 76 mm Tool taper BMT 55 Ndedpox D Dzkefx Agzef Turret Number of tool slots 2 x 12 Rotating tools Yes Media Chip conveyor Yes Internal cooling Yes Additional Equipment Top Automazioni bar loader (Model: ETL10-75, YOM 2018) - weight 2500 kg 600l external cooling water tank with belt filter from Bürener Parts ejector and flushing through the counter spindle Chip conveyor with an ejection height of 1200mm (programmable) Coolant device integrated in the chip conveyor 2 pcs. High pressure pumps with 14 bar // 2 pcs. flushing pumps with 3.7 bar Electronic handwheel 840D COMPRESSED AIR SYSTEM FOR GLASS SCALES EMCO TOP LOAD 15-75/3200 MULTI-LEVEL PART CATCHER WITH FINISHED PART DUST BELT // BELT FILTER SYSTEM This EMCO HYPERTURN 65-1300 DUOTURN CNC Turn-Mill Center was built in the year 2018 in Austria. It is equipped with a SIEMENS Sinumerik 840D SL Control and 2 turrets including milling drive and 2 Y-axes. This highly productive CNC turning/milling center is perfect for the complete machining of turned and milled parts with 1300 m spindle distance. It has integrated spindle motors (ISM) on the main and counter spindles with a spindle speed range from 0 - 5000 min-1. This complete center features 2x 12-fold tool turret radial with directional logic for up to 2x 12 driven tool stations (swivel speed adjustable with feed switch). It comes with several extras from MT65/HT65 BigBore77 to BMT turret (top right) with direct drive for HT65DT/HT65TT/MT65 (the VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface). See original PDF (German) with all positions attached. Check out photo and video gallery for more details. Application Types Turning

Condition: used, mileage: 105,942 km, power: 375 kW (509.86 HP), first registration: 03/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: brown, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, soot filter, For inquiries about the vehicle, Mr. Seidel will assist you (by telephone). ----Mercedes-Benz Arocs 3351 LS tractor unit with timber crane ----* Crane: Palfinger S260Z96 * 3,106 operating hours---- * A1E Front axle 9.0 t * A1W Differential lock on front axle * A2G Rear axle, crown wheel 300, planetary, 13.4 t * A5Y Axle ratio i = 4.333 * B1B Electronic braking system with ABS and ASR * B1Z ABS, disconnectable * B2B Drum brakes, on front and rear axle * B2X Parking brake, electronic * B2Z Parking brake, additionally on front axle * B4M Air reservoir, steel * C0G Rear overhang 1050 mm * C2I Wheelbase 4200 mm * D0E Steering wheel, diameter 500 mm * D0S Compressed air connection, in cab * D1C Driver's suspension seat, comfort * D1N Passenger functional seat * D2N Seatback unlocking, driver's seat * D3B Comfort bed, lower * D3Q Seat cover, velour * D4T Curtain, transverse in front of bed(s) * D4Z Sunblind, side, driver and passenger side * D6C Electric stand air-conditioning system * D6G Automatic climate control * D6I Residual heat utilization * D6M Auxiliary hot water heater, cab * D7A Additional heat insulation * D7G Storage compartment cover, driver and passenger side * D7R Storage flaps above windscreen * D7V Table on passenger side * D7Y Luggage shelf, upper, on rear wall * D8N Electric lifting roof * E4B Interface for Fleet Management System (FMS) * E5H Night driving light switch * E6A Trailer socket 24 V, 15-pin * E6Z Reverse warning system * E9G Preparation for electric devices * F0G Side module, N3G vehicle * F1W L-cab StreamSpace, 2.30 m, tunnel 320 mm * F4X Exterior storage compartment flap, left * F5L Exterior sun visor, transparent * F5Y A-pillar trim * F6C Tinted windscreen * F6I Heated front mirror * F6Q Compressed air horn * F6T MirrorCam * F7B Bumper, corners of steel * F7D Bumper, center with tow eyes, coupling jaw * F7Y Cab access left/right, movable * F8E Locking system with central locking * F8F Comfort locking system * F8V Light sensor * F8W Rain sensor * G0A Driveline, 44 t to 68 t * G0R Transmission mounting arms, optimized for removal * G0T Predictive Powertrain Control * G0W Offroad drive program * G2F Gearbox G 330-12/11.63-0.77 * G4E Transfer case VG 3000-3W, 1.04 switchable * G5B Twin-disc clutch * G5G Mercedes PowerShift 3 * I2H Tubeless tires, 315/80 R 22.5 rear axle * I2P Tubeless tires, 385/65 R 22.5 front/leading/non-leading axle * I4J Axle configuration 6x6 * I5H 33-ton vehicle * I6I Vehicle production site Wörth * I6W Leaf suspension, rear axle * J1O Digital tachograph, 2nd generation, ADR * J1S Tachograph manufacturer VDO * J2K Speakers, 2-way system * J2U Navigation system * J3U Prerequisite Fleetboard Manager App * J3V Truck Data Center 7 * J6C Multimedia Cockpit, interactive * J6Y Remote Online * J6Z Preparation for Mercedes-Benz Truck App Portal * J8Y Preparation for Truck Data Center 7 * J9A Preparation for CB radio, 12 V, DIN slot * J9D Preparation for toll system Ndsdpfx Ajx Ntl Ssgzof * J9P Preparation and display for up to 4 cameras * JAAY Distance, rear axle after shift of 2nd rear axle, 1450 mm * JBWZ Adaptation AO air reservoir * JBXJ EAPU shifted according to drawing number "X" * JC0E Rear overhang 950 mm * JCDA Stabilizer for conversion to air suspension, rear axle * JCMX Overhang shortening * JJ3Z Axle load measuring device * JKVT Fuel tank shifted to position 1925 mm * JQ3Y Frame lowering, without residual pressure control of air bellows * JQHL Air suspension on rear axle with electronically controlled air s

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 400 h, Automatic cutting line automatic loader 7000 mm Nedpfjxv Evtsx Agzsdf cut-off saw with 650 mm blade electronic tilt left/right automatic unloader 3500 mm waste conveyor belt labelling machine

Condition: used, Year of construction: 2011, lifting height: 8,250 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 2.760 kg Functional Lifting capacity: 350 kg Working height: 1.030 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 296x165 Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Ndodpfxjv Tiuro Agzsf Type: Monostar Y-83 Built in: 2011 Features: Max. Working height 10,25 m Max. Platform height 8,25 m Max. Lifting capacity 350 kg Max. Lifting capacity extension 350 kg Engine Batterie Platform dimensions L x B 2,64 x 1,50 m Platform lenght pushed out 3,55 m Overall dimensions (LxB) 2,96 x 1,65 m Weight 2.760 kg Transport height with railing 2,47 m Transport height without railing 1,30 m Moveable until working height 10,25 m Ground clearance 0,16 m Only indoor using no Specifics: white wide tires , Climbing ability 25% , Stop Points for Support System (PSA) available Location: 41468 Neuss immediately available

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) Ndsdpjlkdpmefx Agzjf No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,297 h, Control Unit Brand Heidenhain Model iTNC 530 Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 735 mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm Tools Type of tool holder SK40 Ndodpfxex D N Nmo Agzof Additional Equipment Magnetic plate 3D infrared probe This 5-axis DECKEL MAHO DMU 65 monoBlock was manufactured in 2012. It features a vertical machining center with an 18000 rpm spindle and a 3D infrared probe. The machine dimensions are X: 735mm, Y: 650mm, Z: 560mm. Ideal for complex and precise machining tasks, the DECKEL MAHO DMU 65 monoBlock machine we have for sale. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head. Horizontal position of the panel (workpiece) Numerical Control Xilog Plus 2 (Software Xilog Plus 2) Safety cabin (enclosure) of the working head. Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) With pushing system to automatically infeed the workpiece In-feeding table (with motorized belts) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 250 x 70 x 10 (2 x 5 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1300 x 80 (2 x 40 mm) Two (2) panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Nodpfsfz I Ufex Agzjdf WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle HSK63F (power Kw 7,5) No. 1 Circular Grooving Saw - dia. mm 125 No. 48 Vertical drilling spindles No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Inserting nozzle and glue injectors. Storage tanks for automatic feeding of the dowels

Year of construction: 2014, operating hours: 100 h, condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 4500 mm Measurements height 1800 mm Machine weight 2200 kg Control Unit Brand FANUC Model 31t- Model B Controller Brand FANUC Model 31i B Main Drive Spindle speed range 5000 Number of axis 3 Workpiece Workpiece weight 4.5 kg Ndsdpsx D H Sfofx Agzjf Additional Equipment Automatic bar loading magazine with adjustable part length and bar diameter Remnant extraction system Guide channel made of polyurethane plastic Displacement system for longitudinal movement This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Njdpfxswb Allj Agzsdf Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Year of construction: 2020, operating hours: 16,597 h, condition: ready for operation (used), General Data Measurements width 2130 mm Measurements depth 2880 mm Measurements height 1990 mm Machine weight 7500 kg Control Unit Brand SIEMENS Model 840D-SL Main Drive Spindle speed range 5000 rpm Spindle motor power 24 kW Nedpfx Ajx D Itkegzjdf Spindle bore Ø65 mm Number of axis 7 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Media Main electronic connection 60 kW Additional Equipment Coolant Tank Volume: Approximately 200 liters Hydraulic Tank Volume: Approximately 120 liters Central Lubrication Unit Volume: Approximately 2 liters Operating Current (IB): 76 A Rated Current of Protection Device (IN): 80 A This 7-axis SPINNER TTS 65-DUPLEX horizontal turning machine was manufactured in 2020. It features a spindle bore of Ø65 mm, a chuck diameter of 210 mm, and a maximum spindle speed of 5000 rpm. The machine includes a 3-meter bar loader, enhancing its productivity. With rapid traverses of 30 m/min and an acceleration of 0.5 g, it ensures efficient operations. If you are looking to get high-quality turning capabilities, consider the SPINNER TTS 65-DUPLEX machine we have for tact us for more information. Application Types Turning