Used Ac Chamber for sale (12,476)

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Dkjdpozimfvjfx Ahhew Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK3-2200/40/5/V Weiss Climate Chamber, Water-Cooled Data for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ± 0.8 K Spatial: ± 2.0 K Maximum heat compensation: 8000 W Data for climate tests: Temperature range: +10 to +95°C Dew point temperature range: +4 to +94°C with closed bottom element Humidity range: 10 to 95% RH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% RH Temperature homogeneity: Spatial: ± 1.0 K Maximum heat compensation: 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height: 1115 mm, Width: 1400 mm, Depth: 1400 mm External dimensions (lowered): Height: 2318 mm, Width: 1860 mm, Depth: 3658 mm External dimensions (above shaker): Height: 2710 mm External dimensions (maximum stroke height): 3038 mm Dimensions of interchangeable floor: Width: 1600 mm, Depth: 1504 mm Data for operation: Rated voltage: 3/N/PE AC 400V, 10%, 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse protection: 80 A, slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. If necessary, refilling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Dkodpfeziixrex Ahhjw

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Dodpfxoziiz He Ahhskw Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT11-1000/40   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -40°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min   Dkjdpfezfzamex Ahhjw Heat compensation max. 4500 W   Feedthroughs installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Total load of the shelf supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 840 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WT3-600/40   Weiss temperature test chamber with S!MCON / 32 control, air-cooled   (Refrigerant converted to R-452A)   Control panel: "Touchpanel" All control and operating commands can be initiated on the "Touchpanel" control panel by simply touching the function symbols.   Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet.   Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed inside the test chamber.   Feedthrough installed as standard R1: 125 mm nominal diameter L1: 50 mm nominal diameter   Test chamber volume: approx. 600 liters   External dimensions with hinges and door latch Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door latch Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm   Data for temperature tests:   Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K   Temperature change rate (according to IEC 60068-3-5) Dksdpfx Ahjzga Hujhjw Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse on customer side: 16 A, slow-blow   Sound pressure level approx. Measured at a distance of 1 m from the front, 1 m height: 61 dB(A)   Refrigerant: R-452A   Weight: 620 kg   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We are happy to answer any further questions you may have by telephone.

Condition: used, Weiss Temperature test chamber / climate test chamber Weiss WT-270/70/10 temperature test chamber Temperature test chamber, water-cooled, -70 °C to +180 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Djdpfx Ahezgcqvshskw Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Device type: Temperature test chamber / climate test chamber Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Weight: approx. 835 kg Temperature range: -70 °C to +180 °C Temperature change rate heating: approx. 10 K/min Temperature change rate cooling: approx. 14.5 K/min Temperature deviation over time: ± 0.3 to ± 0.8 K Temperature deviation spatially: ± 0.5 to ± 2 K Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure: 19 bar g Maximum discharge pressure: 25 bar g Standby pressure: 17 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Shelf / test chamber equipment as shown in the pictures Control cabinet Main switch panel Connector panel RS232 interface Documentation / operating manual Accessories as shown in the pictures Application areas Temperature testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Weiss WT-270/70/10 temperature test chamber Documentation / operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Dkedpezd Axbsfx Ahhjw Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Dsdpfx Ajzg Er Ajhhjkw Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Dkedpfx Ahszg Tpcehew Refrigerant: R-404A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Dkedpfx Ahezg Tpijhjw Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Dsdjzg Tp Nspfx Ahhokw Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: WK-480/40/10 Water-cooled climate testing chamber Test chamber lighting: Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate: Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8000 W Heat compensation at -20°C: 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % RH Temporal temperature deviation in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A, Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: Dkedpfjzgaipox Ahhsw 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VLM 3068/S Vötsch Temperature Test Chamber VLM 3068/S, Air-Cooled (Top-loading test chambers for construction materials) Control Panel The control panel is mounted on a console on the temperature test chamber. All control and operating commands can be activated by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Handling Unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air deflectors on the long sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front 2 x 82 mm diameter, at the rear 1 x 85 mm diameter. Internal Dimensions: Width 2000 mm, Depth 570 mm, Height 600 mm External Dimensions: Width 3000 mm, Depth 870 mm, Height 1060 mm Technical Data: Dksdpfx Ajzgbmishhsw Data for Mechanical Load: Max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for Temperature Tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the useful space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for Operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Fuse on customer side 16A slow-blow Temperature Test Chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WT3-1000/40 Weiss temperature testing cabinet with S!MCON / 32 control, water-cooled Control panel: "Touch Panel" All control and operating commands can be initiated on the "Touch Panel" control panel by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet. Dodpfozgbt Njx Ahhskw Feedthroughs The testing cabinet is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the testing chamber. Feedthroughs installed as standard R1: 125 mm L1: 50 mm Testing chamber volume: approx. 990 liters Testing chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 4500 W Data for operation: Testing chamber lighting: Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A, Rated power 11.5 kW Fuse, to be provided by the customer: 32 A, slow-blow Sound pressure level approx. measured at a distance of 1 m from the front, 1 m height: 56 dB(A) Refrigerant: R-404A Weight: 840 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Vötsch   Type: VCS 7033   Vötsch climate chamber VCS 7033, water-cooled   Temperature range: -70°C to +180°C   Temperature change rate:   Heating: 7.5 K/min Cooling: 6.5 K/min   Humidity range: 10% to 98% RH   Temperature deviation (temporal): ± 0.5 K Temperature deviation (spatial): ± 1.5 K   Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm   Side feedthrough: 90 mm diameter   Approx. 330 L, weight: 600 kg   Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW, rated current: 17 A Djdpfx Ajzfy Rqohhekw   Refrigerant: R-404A / R23   For your safety as a buyer, please note the following:   The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have over the phone.

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Djdpfx Ahezfy Rwohskw Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Vötsch Climate test chamber / temperature test chamber Vötsch VC 4060 climate test chamber Temperature and climate test chamber with humidity, water-cooled (converted to R-452a) For sale is a used climate test chamber from Vötsch Industrietechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Equipment type: Climate test chamber / temperature test chamber Test chamber volume: approx. 600 liters Controller: S!MCON / 32 Test chamber dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature range: -40 °C to +180 °C Temperature change rate, heating: approx. 4.0 K/min Temperature change rate, cooling: approx. 3.0 K/min Temperature deviation, temporal: ±0.1 to ±0.5 K Temperature deviation, spatial: ±0.5 to ±2 K Temperature gradient: approx. 1 to 4 K Climate range, temperature: -10 °C to +95 °C Humidity range: 10 % to 98 % RH Humidity deviation: ±0.1 to ±3 % RH Temperature deviation, climate operation, temporal: ±0.1 to ±0.3 K Temperature deviation, climate operation, spatial: ±0.5 to ±1.0 K Temperature gradient, climate operation: approx. 1 to 2 K Refrigerant: R452A Cooling: water-cooled Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated power: 7.8 kW Rated current: 15.0 A Fuse: 16 A slow-blow, provided by the customer 1 penetration Ø 50 mm, installed on the left 1 penetration Ø 125 mm, installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 controller Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side penetrations Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Areas of application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Vötsch VC 4060 climate test chamber Documentation / operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Dedpfszf E E Tjx Ahhokw Shipping or forwarding by a freight carrier is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / Corrosion test cabinet Weiss SC/KWT 450 salt spray chamber Testing system for corrosion, salt spray, and condensation water tests For sale is a used salt spray chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, and long-term durability tests under standardized environmental conditions. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Equipment type: Salt spray chamber / Corrosion test cabinet Test chamber volume: 450 liters Test chamber dimensions: approx. 850 x 570 x 740 mm (W x D x H) External dimensions: approx. 1930 x 800 x 920 mm (W x D x H) Weight: approx. 180 kg Max. load: 100 kg Brine reservoir: 180 liters Salt spray test: Room temperature to +50 °C Dksdpezd Az Aofx Ahhsw Condensation water test: Room temperature to +45 °C Humidifier temperature: up to +75 °C Standards: DIN 50021 Salt spray test DIN 50017 Condensation water test KFW DIN 50014 Normal climate (ventilation) Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Equipment Programmable control Test chamber with sample holders Brine supply system Air purification Documentation / Service documents available Accessories as shown in the pictures Application areas Corrosion testing Salt spray tests Coating testing Automotive industry Material testing Quality assurance Research and development Scope of supply 1x Weiss SC/KWT 450 salt spray chamber Documentation / Service manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC 4034 Climate testing chamber Temperature and climate testing chamber, air-cooled Converted to R452A For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Equipment type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg net Temperature range: -40 °C to +180 °C Temperature change rate, heating: approx. 3.2 K/min Temperature change rate, cooling: approx. 3.5 K/min Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 1.5 K Climate range, temperature: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1.0 K Refrigerant: R452A Refrigerant quantity: 2.5 kg Maximum suction pressure: 22 bar g Maximum discharge pressure: 25 bar g Mains connection: 3/N/PE AC 400 V +10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side feedthrough Insert grid Air-cooled system Documentation / Operating manual Accessories according to the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Dsdpfx Ahezd Dm Hohokw Condition Used Optical condition according to the pictures Scope of delivery 1x Vötsch VC 4034 Climate testing chamber Insert grid Control panel / controller Documentation / Documents Accessories according to the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss   Weiss Umwelttechnik WT-600/70/5 Temperature testing chamber -70°C to +180°C Water-cooled   For sale is a used temperature testing chamber from Weiss Umwelttechnik. The unit is functional and has been inspected.   This is a temperature testing device without a humidity function. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is often used in industry, development, and quality assurance.   The temperature range is from -70°C to +180°C. The unit can heat up and cool down quickly and operates with forced air circulation for uniform temperature distribution inside. Cable feedthroughs with 125 mm and 50 mm are available.   Dsdpfx Ahoy At Sxehekw Technical data: Test chamber designation: WT-600/70/5   Cold/heat operation -70°C to 180°C   Temperature change per unit of time Cooling: approx. 6 K/min Heating: approx. 6 K/min   External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   3/N/PE AC 400V ±10% 50Hz Rated power: 16 kW Rated current: 19 A Fuse (customer-supplied): 29 A slow-blow Permissible test item weight Total load capacity of the shelf supports: 80 kg   Test chamber floor: 80 kg, Insert shelf: 40 kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your peace of mind as a buyer, the following information!   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After a successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments.   Condition: used   Scope of delivery: (See image)   (Changes and errors in technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC³ 4018 Climate testing chamber Temperature and climate testing chamber, air-cooled For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Device type: Climate testing chamber / Temperature testing chamber Testing chamber volume: approx. 190 liters Testing chamber dimensions: approx. 580 x 450 x 750 mm (W x D x H) Housing dimensions: approx. 870 x 1550 x 1800 mm (W x D x H) Weight: approx. 470 kg Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 5 K/min Max. heat compensation: approx. 2300 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.5 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ± 1 to ± 3 % RH Heat compensation (climate operation): approx. 400 W Refrigerant: R404A Refrigerant quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Testing chamber lighting: Halogen, 2 x 24 V / 50 W Feedthroughs available Operation via touch panel / controller Equipment Dksdpfx Ahoztu Nqshew Touch panel operation Viewing window in the door Interior made of stainless steel Testing chamber lighting Side feedthroughs Shelves / Testing chamber equipment as shown in the pictures Documentation / Operating manual Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötsch VC³ 4018 Climate testing chamber Documentation / Operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful check The table or any other items not explicitly mentioned in the photos are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Type: VT 7012 S2 Water-cooled version Vötsch temperature shock test chamber / environmental simulation system Model: VT 7012 S2 Two-chamber system (hot / cold chamber) For sale is a high-quality Vötsch temperature shock test chamber for rapid temperature change tests in industry, research, and development. The device is in used condition. See pictures for optical condition. Control panel and observation window are included. Temperature data: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate cold chamber: approx. 3 K/min Test chamber: Test chamber volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø approx. 67 mm Dimensions: External dimensions: approx. 930 x 2115 x 1970 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant according to nameplate: R404A: 2.9 kg R23: 1.27 kg Operating pressure ND: max. 22.5 bar Operating pressure HD: max. 25 bar Weight: approx. 1000 kg Equipment / Features: Two-chamber shock test system Rapid temperature change testing Digital control / display Program operation Observation window Cable entry Water-cooled version For your safety as a buyer, the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Dkedpfx Aoy Iyuwjhhew Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement Loading can be organized (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, Weiss Climate testing chamber ClimeEvent C/1000/70/5, water-cooled, 1000 liters, year of manufacture 2019, operating hours 3577.95 h. For sale is a high-quality climate testing chamber of the type ClimeEvent C/1000/70/5. Dsdpfxey Iyx As Ahhskw The device is used in industry, development, and quality assurance to test components and products under extreme temperature and climatic conditions. The chamber enables realistic simulations of environmental conditions – from extreme cold to high temperatures and humidity levels. Ideal for electronics, automotive, material testing, and research. The device operates reliably and reproducibly and is designed for long-term tests and tests in accordance with standards. With this climate chamber, temperature and humidity conditions can be specifically set and controlled. This allows the aging, stress, and function of components to be tested under real environmental conditions. Typical applications include temperature cycling tests, climate tests with humidity, and endurance tests. Due to the rapid temperature change (up to approx. 5 K/min), accelerated tests are also possible. Technical data: Type: ClimeEvent C/1000/70/5 Year of manufacture: 2019 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10 % to 98 % RH Internal dimensions (test chamber): approx. 950 x 1100 x 950 mm Volume: approx. 1000 liters External dimensions (approx.): 2000 x 1415 x 2030 mm Power connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerant: R449A / R23 Weight: approx. 1300 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch Climate testing chamber / temperature and humidity testing chamber Vötsch VCS³ 7034-5 climate testing chamber, water-cooled Temperature range from -70 °C to +180 °C with humidity control Workshop-tested with documented test run and only approximately 3,485 operating hours For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The climate testing chamber is suitable for temperature and humidity tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large viewing window and a lateral test specimen port. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature and humidity testing chamber Year of manufacture: 2016 Operating hours: approx. 3,485 h Temperature range: -70 °C to +180 °C Humidity control: available Water-cooled version Test results documented in the workshop protocol: Temperature change rate, heating: approx. 7.65 K/min Temperature change rate, cooling: approx. 7.71 K/min Humidity test at 30 °C / 40 % r.h. Humidity test at 80 °C / 85 % r.h. Refrigerant 1: R404A Refrigerant quantity: 2.50 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Standing pressure: 13 bar g Djdezqmx Ejpfx Ahhekw Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Nominal power: 9 kW Nominal current: 20 A Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): 750 × 580 × 765 mm External dimensions (H × W × D): 1,800 × 872 × 1,758 mm Weight: 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled version Interior made of stainless steel Large viewing window Test chamber lighting Separate digital temperature and humidity display Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Several stainless steel inserts in the test chamber Program operation and manual operation Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of supply: 1x Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the images Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional test and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items that are not explicitly mentioned in the photos are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch   Temperature Shock Chamber / 2-Chamber Shock Test System   Vötsch VT³ 7012 S2 Temperature Shock Chamber Warm chamber +50 °C to +220 °C / Cold chamber -80 °C to +70 °C 125 liter test chamber volume – Year of manufacture 2018 – water-cooled version   For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is used for performing rapid and shock-like temperature changes and is particularly suitable for environmental simulation, Environmental Stress Screening (ESS), quality assurance, as well as stress and reliability tests of electronic components, assemblies, and other test specimens.   The VT³ 7012 S2 operates according to the 2-chamber principle with a warm and cold chamber. The test specimen is transported between the two temperature zones in a vertically moving test carriage and is thus subjected to rapid temperature changes.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Device type: Temperature shock chamber / 2-chamber shock test system Year of manufacture: 2018 Made in Germany   Test chamber volume: 125 liters Number of chambers: 2 Temperature range warm chamber: +50 °C to +220 °C Temperature range cold chamber: -80 °C to +70 °C Max. test weight / test carriage load: 50 kg Refrigeration unit: water-cooled   Refrigerant 1: R449A Refrigerant quantity: 1.70 kg GWP: 1,397 CO₂ equivalent: 2.37 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.27 kg GWP: 14,800 CO₂ equivalent: 18.80 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Operating pressure: 14 bar g   Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A   Test chamber dimensions (W × D × H): 470 × 650 × 410 mm External dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required room height for operation: approx. 2,450 mm Weight: approx. 1000 kg   Equipment: Djdozzazuopfx Ahhskw   2-chamber temperature shock system Vertically moving test carriage Programmable touch panel control CONTROLPAD for status display Temperature control Test chamber lighting Observation window Pipe connection Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / remaining runtime display USB and Ethernet interfaces   Areas of application:   Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Lifetime and stress tests   Condition:   Used Optical condition as shown in the pictures   Scope of delivery:   1x Vötsch VT³ 7012 S2 Temperature shock chamber Touch panel control Equipment and accessories as shown in the pictures   Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping by freight forwarder is possible. Subject to change, errors and prior sale.   We will be happy to answer any further questions by telephone.