Used Acoustic Enclosures for sale (1,599)

Condition: new, The EXE 602D is an interpolation and digitizing unit housed in a robust cast enclosure. Models in this series are suitable for connection to HEIDENHAIN linear and angle encoders with sinusoidal current signals (7 µASS to 16 µASS). Gusdpfx Afjylctcj Aef

Condition: used, Year of construction: 2009, Overview This SMI SK 450 T is a shrink packer for PET bottles, built in 2009 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 45 packs per minute. It handles 0.5 l bottles in 3x3, 0.75 l bottles in 2x3 and 1.5 l bottles in 2x3 formats. The wrapping section is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the shrink packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SMI (Italy) - Model: SK 450 T - Year of manufacture: 2009 - Machine type: shrink packer for PET bottles with integrated heating tunnel - Output: up to 45 packs/minute - Pack formats: 0.5 l (3x3), 0.75 l (2x3), 1.5 l (2x3) - Location: Germany Equipment - Integrated shrink tunnel (heating oven) - Film wrapping unit with film roll holders - Machine-mounted touchscreen control panel - Full safety enclosure with viewing windows Condition The machine is well maintained and has received extensive annual overhauls by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 7 and 10 October 2026 and can be carried out by the seller. The machine is located in Germany. Gusdpfx Aozuc Nzof Aof

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,000 rpm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: 426, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Soraluce SP 8000 was manufactured in 2000. It features an impressive X-axis travel of 6,500 mm, Y-axis travel of 1,250 mm, and Z-axis travel of 2,000 mm. The machine is equipped with a high-torque spindle motor and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Soraluce SP 8000 universal machining centre we have for sale. Contact us for further details. • Max. feed rate: 15,000 mm/min • Guideways: Heavy-duty linear/roller guideways with linear scales • Milling head: Automatic Huré-type universal head, 2.5° x 2.5° automatic indexing on both bodies • Spindle: taper ISO 50 / SK 50 (DIN 69871); direct/gearbox-driven high-torque motor • Tool changer and magazine: ATC with 30-tool chain-type, column-mounted; supports heavy-duty tooling (weight/length per standard) • CNC control: Heidenhain iTNC 530 / TNC 640 or Siemens Sinumerik Additional equipment • Chip conveyor (longitudinal, between table and column) • Coolant system (external supply to tool/head) • Enclosure (partial/perimeter protection) Technical Specification Guedpfx Afozumgke Ajf Taper Size ISO 50

Condition: good (used), Year of construction: 1982, max. wheel diameter 600 mm gear width 500 mm max. module 15 min. module 1 total power requirement 2 kW weight of the machine ca. 2 t dimensions of the machine ca. 2x1,5x2 m The rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles available on the cams and the ability to process internal gears, make the machine a universal machine suitable for machining small and large series. Gsdpfx Aewftuxef Ajuf --> technical features Max module: 15 --> Max diameter: 600 mm --> Spindle/head speed: 1450 - 2100 - 2800 rpm --> Production output teeth per minute: 35 - 50 - 75 --> Motor output spindle: 2800 rpm - 1.5 HP --> Motor power piece rotation (self-braking): 1.5 HP --> Motor power automatic (self-braking): 0.35 HP --> Motor power cooling system: 0.25 HP --> Dimensions: 2000 x 1500 mm --> Total weight: 2000 kg Accessories Cam x 5 Indexing wheels Tools Serial no. 152/0589/94 Machine with full enclosure Counter support

Condition: ready for operation (used), Year of construction: 1999, total height: 1,917 mm, total width: 1,200 mm, product length (max.): 9,295 mm, Edgebander manufactured in 1999. This HOMAG Optimat KL 78/A20/S2 features a panel formatting milling cutter, bevel and rounding milling cutter, groove saw, and edge draw blade. It accommodates workpieces with a thickness range of 8 to 60 mm and has a working height of 950 mm. If you are looking to get high-quality edging capabilities, consider the HOMAG Optimat KL 78/A20/S2 machine we have for sale. Contact us for further details. - Equipment: Panel formatting milling cutter, bevel and rounding milling cutter, groove saw, edge draw blade- Additional Equipment: Bühnen PU melting unit (with dedicated blue control box and temperature controllers)- Work Piece Length: min. 120 mm- Work Piece Width: min. 120 mm- Work Piece Thickness: min. 8 - max. 60 mm- Working Height: 950 mm- Machine Dimensions (from floor plan): Length 9295 mm, Total Height 1917 mm (approx. 2275 mm with open hood / noise enclosure open), Working line width approx. 1200 mm- Space Requirements: Length 9.6 m, Width min. 2.5 m, Height 2.3 m (flaps open)- Voltage: 400 V- Frequency: 50 Hz- Current: 55 A- Recommended Fuse: 63 A- Control Voltage: 24 V- Total Extraction Capacity: approx. 6010 m³/h- Air Speed: 28 m/sec- Compressed Air Consumption: approx. 816 NL/min- Pressure Drop: 200 mm WS- Electrical Connected Load: 32 kW- Extraction Connections: 3x Diameter 120 mm, 2x Diameter 60 mm Guodpfx Afozuhc Ho Ajf

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 3,686 mm, travel distance Y-axis: 1,555 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis BUSELLATO easyjet 5.12 was manufactured in 2013, designed for high-accuracy operations in panel processing. It features a CNC-controlled spindle, optimized for drilling, milling, and nesting, with a travel range of 3686mm on the X-axis and 1555mm on the Y-axis. Ideal for wood, MDF, plywood, and composite panels. Consider the opportunity to buy this BUSELLATO easyjet 5.12 CNC Wood Machining Centre. Contact us for more information about this machine. Additional equipment • Material Handling: Optimized for wood, MDF, plywood, and composite panels • Software Integration: Nesting software integration for optimized cutting patterns • Safety Features: Safety enclosures and interlocks Guedpfx Aszug Rcsf Asf Machine Benefits Technical Machine Benefits • Precision: high-accuracy operations for drilling, milling, and nesting • Control system: cnc interface (busellato proprietary or compatible) • Control system: cnc interface (busellato proprietary or compatible) • Clamping: vacuum or mechanical clamping for panels • Spindle: cnc-controlled, suitable for drilling, milling, and nesting • Tool changer: automatic tool changer (depending on configuration) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 180 mm, number of axes: 3, spindle motor power: 5,600 W, spindle speed (max.): 18,000 rpm, This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. • Machine frame: Heavy-duty mono-block structure in electro-welded steel • Spindles: • Vertical electro-spindles: 3 • Drilling spindle • Power: 1.7 kW • Speed: 4350 rpm • Point-to-point drilling head: • 5 vertical drilling spindles (32 mm spacing) Gsdpfx Ajzug Hksf Aouf • 3 double-exit horizontal spindles along Y-axis (32 mm) • 3 double-exit horizontal spindles along X-axis (32 mm) • Milling/mortising spindle • Power: 7.0 kW • Speed range: 12,000–18,000 rpm • Cutting/milling/drilling spindle • Power: 7.0 kW • Speed range: 8,000–18,000 rpm • Multi-function aggregate included • Horizontal electro-spindle: • Type: Milling/mortising spindle • Power: 5.6 kW • Speed: 12,000–18,000 rpm • Tool holder: ER32 collet • Working area: • Nominal strokes: X 3350 mm, Y 200 mm, Z 180 mm • Two working fields: 2 × 1500 mm • Axes positioning speed: up to 70 m/min • Interpolation: Linear and circular on X/Y/Z (3 axes CN-controlled) • Workpiece support tables: • 4 + 4 tables on adjustable slides • Each table with 4 + 4 vertical pneumatic clamping cylinders • Frontal and lateral reference stops • Control system: • CAD-CAM control unit • Stand-alone electrical cabinet • Industrial PC with 17" touchscreen • Connectivity: Ethernet, USB, RS232 • Software: Supports NC CAM Suite TPAED132 • Safety and enclosure: • Full perimeter safety cabin • Automatic synchronized front safety door • Polycarbonate panels and safety interlocks • Power and standards: • Supply voltage: 400 V / 50 Hz • CE safety compliance

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Gsdpfx Afjzugqie Asuf Weight: 185 kg The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Gedezul Utopfx Af Aeuf Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Gujdpszul Tvofx Af Ajf Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: used, mileage: 182,283 km, power: 382 kW (519.37 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.520 LL SA Low-Liner Mega SZM "LONEWOLF" First registration 02/2024, from first owner Mileage 182,283 km Cab: GX (the maximum), 1 bed, large storage compartments/cabinets installed at the top rear, cab air suspension, safety package (lights and visibility), driver comfort package, comfort driver's seat, electric glass sunroof, safety glass in door windows, full LED lighting, 2x air horns, electric stand-alone air conditioning, auxiliary water heater, Climatronic, additional cab insulation (thermal and acoustic), refrigerator, 220-volt socket, microwave mounted in the storage compartments, MAN truck navigation, MAN sound system, sun visor painted in cab color, roof lamp bar with 4x LED spotlights Double tank system: 2x 480 L = total 960 liters RETARDER and additionally high-performance engine brake EVBec Automated manual transmission MAN TipMatic 14.30 OD, transmission function: idle speed driving, performance and efficiency Full air suspension with raising/lowering ECAS Tires: Front axle: 355/50 R 22.5 Rear axle: 295/60 R 22.5 Fifth wheel height: 960 mm Full safety package with ACC cruise control with stop-and-go function, lane departure warning LDW and lane change assist LCS, rain sensor, light sensor/high beam assist, emergency brake assist EBA, full brake assist, ESP, ASR, ABS/EBS Godjzuh Ucopfx Af Aouf RENTING is the new BUYING; with us, it is also available immediately in a full-service rental or leasing agreement.

Year of construction: 2026, condition: new, functionality: fully functional, travel distance X-axis: 3,010 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 260 mm, overall weight: 2,300 kg, feed rate X-axis: 55 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 12, swivel angle A-axis (max.): 180 °, number of axes: 4, ACROLOC SBZ 200 | 4-axis CNC profile machining center with German CAM software camQuix The ACROLOC SBZ 200 is a powerful CNC profile machining center for the professional and economical processing of aluminum profiles. The machine was designed for industrial use and combines high processing speed, precision, and flexibility with modern and user-friendly programming. A particular highlight is the German CAM software camQuix from camProx. It was specifically developed for the processing of aluminum profiles and offers clear 3D programming with DXF import, parametric machining, automatic tool assignment, intelligent clamping management, and collision detection. This allows machining operations to be conveniently prepared, visualized, and checked for potential collisions even before production. This reduces setup times and increases process reliability. Technical highlights: 4 interpolated CNC axes Spindle swivel range from -90° to +90° High-performance electric spindle with 5 kW Maximum speed 24,000 rpm Tool interface HSK F50 Automatic tool changer with 12 tool positions Additional position for a larger tool 6 automatic profile clamps Travel range X-axis 3,010 mm Travel range Y-axis 330 mm Travel range Z-axis 260 mm Speed X-axis up to 55 m/min Speed Y-axis up to 40 m/min Speed Z-axis up to 30 m/min Machine enclosure Industrial and robust machine construction Guedpezugtwefx Af Aof The SBZ 200 enables milling, drilling, threading, pocketing, slotting, and free-form contour machining on aluminum profiles. Thanks to the 4 interpolated axes and the pivoting spindle, profiles can be machined from different angles without having to manually realign the workpiece for each machining side. The 6 automatic profile clamps ensure secure and stable workpiece clamping. In conjunction with camQuix, clamping positions are already taken into account during programming and included in the collision detection. The ACROLOC SBZ 200 is particularly suitable for window and facade construction, doors and portal systems, mechanical engineering, vehicle construction, and for general industrial aluminum profile machining. An interesting alternative in the premium segment With 4 interpolated axes, 24,000 rpm, HSK F50 spindle, automatic tool changer, 6 automatic profile clamps, and especially the German camQuix CAM software, the ACROLOC SBZ 200 offers an interesting alternative to established profile machining centers from Elumatec, Emmegi, Pertici, and Mecal. A significant advantage is the complete package of modern machine technology, powerful German CAM software, and direct technical support from ACROLOC. Inspection and demonstration are possible by appointment. Upon request, customer-specific profiles and concrete machining tasks can also be considered during the demonstration.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes Gusdpfx Afsy E I Hij Ajf • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, Year of construction: 2025, functionality: unexamined, Data Gsdpfx Afscwulue Aeuf Machine type: TBF 650 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Center width: 650 mm Grinding length: 620 mm Grinding wheel: 500 x 80 x 203,2 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification. Painting Once the geometry of the machine has been restored, it is prepared for repainting. All enclosures, tables and the machine bed are stripped of old paint, cleaned and repainted. Controls The machine’s Marposs E14 control unit is replaced with a Siemens 840D SL control unit. The control unit is operated via a 15” display and can be customised to meet specific customer requirements

Condition: not inspected (used), 2 Epson robots G6-651S Gusdpfxoynt Hre Af Aef Year of manufacture: 2019 2 Epson RC 700-A controllers Sold as a package with enclosure as shown in the picture. This offer is exclusively for commercial enterprises within the meaning of §14 of the German Civil Code (BGB).

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Gusdpfxoztxp Us Af Aef Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 08/2026, color: white, number of seats: 6, total length: 5,981 mm, total width: 2,474 mm, total height: 2,533 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal Number: 4967.NW26.TL18377 Godpfx Afozh Smps Asuf Errors and prior sale excepted! ----SPECIAL EQUIPMENT * Rear air conditioning - rear water heater - automatic climate control * Seat Package 3A: Driver's seat, 10-way electrically adjustable - passenger double seat - passenger seat, 2-way manually adjustable - headrests, height-adjustable - driver's seat & passenger seat (outer seat), individually and variably heated - tray on the passenger double seat (foldable) - interior armrest for driver - lumbar support for driver - airbag, passenger side - side airbags, left & right - head/shoulder airbags, left & right - seat cover: fabric - heated steering wheel - leather steering wheel * Seats: Deletion of rear seats * Auxiliary Heater Package 2: Auxiliary heater (fuel-powered auxiliary heater), programmable, incl. remote control, incl. 2 batteries and theft alarm system * Conversion to ambulance: ramp (2600x1000, lateral gas struts, anti-slip, pinch protection in yellow, maximum load 350 kg) - system floor - wheelchair and passenger restraint system - storage box - additional flashing lights - step - Linea individual seats FURTHER EQUIPMENT * Axle load increase - front to 1850 kg * Airbag, driver's side * ABS with electronic brake force distribution - ESP with traction control - hill start assist - crosswind assist - safety brake assistant - rollover protection - emergency brake assist incl. emergency brake light * Exterior mirrors, electrically adjustable and heated * Battery: Battery runtime, programming of the battery runtime to 10 min * Floor, rubberized, full vehicle length * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Headliner in driver's cabin and in the passenger compartment * Double-wing rear door with 180° opening angle (with window) - with heated rear windows, rear window wiper incl. windshield washer nozzle and automatic activation when reversing * Vehicle modem - incl. live traffic information and WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Windows, 2nd row: fixed side windows, right and left * Power windows, front - with quick-down/-up function for driver's side * Parking brake, electronic * Ford Easy Fuel - comfort fuel filler flap and misfueling protection * Windshield, heated * Glove compartment with lockable lid * Infotainment: 12-inch multi-function display and Ford SYNC 4 voice control extended Bluetooth hands-free system USB interface SMS read-out and sending function Integration of storage media (e.g. USB sticks or MP3 players) for playing music Emergency call assistant Ford Power-Up software updates (over-the-air update technology) Digital user manual AppLink (wireless) Android Auto, Apple CarPlay Capacitive touchscreen technology 15 different languages, graphical and acoustic * Interior lighting - additionally with reading lamps in the front * Cargo area lighting * Driver fatigue and attention warning system incl. driver camera * Package: Technology Package 2 - Ford Audio System 2 - fog lights - LED downlight - Pre-Collision Assist, radar-based - Lane Keeping Assist - Traffic Sign Recognition System - Park Pilot System rear - Park Pilot System front - Cruise control - Rearview camera * Particulate filter: Diesel particulate filter * Tire pressure monitoring system * Wheels: Wheel covers * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Windshield wipers with rain sensor * Headlights, low beam: H

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 08/2026, color: white, number of seats: 6, total length: 5,981 mm, total width: 2,474 mm, total height: 2,533 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Internal number: 4965.NW26.TL18369 Errors and prior sale excepted! ----SPECIAL EQUIPMENT Gjdpjzh Sm Aefx Af Aouf * Rear air conditioning - rear water heater - automatic climate control * Seat Package 3A: Driver's seat, 10-way electrically adjustable - double passenger seat - passenger seat, 2-way manually adjustable - headrests, height-adjustable - driver's seat & passenger seat (outer seat), individually and variably heated - tray on the double passenger seat (fold-out) - interior armrest for driver - lumbar support for driver - airbag, passenger side - side airbags, left and right - head/shoulder airbags, left and right - seat cover: fabric - heated steering wheel - leather steering wheel * Seats: Rear seats deleted * Auxiliary heater package 2: auxiliary heater (fuel-operated auxiliary heater), programmable, incl. remote control, incl. 2 batteries and theft alarm * Ambulance conversion: Loading ramp (2600x1000, lateral gas struts, non-slip, anti-pinch protection in yellow, maximum load 350 kg) - system floor - wheelchair and passenger restraint system - storage box - additional flashing beacons - step - Linea single seats ADDITIONAL EQUIPMENT * Increased axle load - front to 1850 kg * Airbag, driver side * ABS with electronic brake force distribution - ESP with traction control - hill start assist - crosswind assist - safety brake assist - roll-over protection - emergency brake assist incl. emergency brake light * Exterior mirrors, electrically adjustable and heated * Battery: Battery runtime, programming of the battery runtime to 10 minutes * Floor, rubberized, full vehicle length * Onboard computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Headliner in the driver's cab and passenger compartment * Double-wing tailgate with 180° opening angle (with window) - with heated rear window, rear window wiper incl. washer nozzle and automatic activation when reverse gear is engaged * Vehicle modem - incl. live traffic information and WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Windows, 2nd row: side windows fixed, right and left * Power windows, front - with quick-down/-up function for the driver's side * Parking brake, electronic * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * Windshield, heated * Glove compartment with lockable lid * Infotainment: 12-inch multi-function display and Ford SYNC 4 voice control, extended Bluetooth hands-free system, USB interface, SMS read-out and sending function, integration of storage media (e.g. USB sticks or MP3 players) for playing music, emergency call assistant, Ford Power-Up software updates (over-the-air update technology), digital user manual, AppLink (wireless), Android Auto, Apple CarPlay, capacitive touchscreen technology, 15 different languages, graphic and acoustic * Interior lighting - additionally with reading lamps in the front * Cargo area lighting * Driver fatigue and attention warning system incl. driver camera * Package: Technology Package 2 - Ford audio system 2 - fog lights - LED downlight - Pre-Collision Assist, radar-based - lane keeping assist - traffic sign recognition system - Park Pilot system rear - Park Pilot system front - cruise control - rear view camera * Particulate filter: Diesel particulate filter * Tire pressure monitoring system * Wheels: Wheel covers * Wheels: Steel wheels 6.5 J x 16 with 235/65 R 16 tires * Windshield wipers with rain sensor * Headlamps, low be

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 1,500 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 80 mm, quill travel distance: 80 mm, overall weight: 2,500 kg, workpiece weight (max.): 400 kg, Equipment: documentation/manual, ABENE VHF 360 – Universal/CNC Milling Machine with HEIDENHAIN Control For sale is an ABENE VHF 360 milling machine in good condition. The machine features a generously sized T-slot worktable and is suitable for single-part production, toolmaking, repair work, as well as smaller series. Gsdpfx Afeztwwwo Aouf The machine is equipped with a HEIDENHAIN control system. The control panel is clearly laid out and includes a handwheel, feed and spindle control, and an emergency stop. The machine appears to be in very clean and well-maintained condition. Equipment / Features: Manufacturer: ABENE Type: VHF 360 Universal/Tool Milling Machine HEIDENHAIN CNC Control Large T-slot milling table Vertical milling head Manual controls on the milling head Flexible coolant hose in the work area Central lubrication Hydraulic/lubrication unit Machine enclosure with protective cover Separate HEIDENHAIN control panel Electronic handwheel Emergency stop Solid and robust machine design The machine is in good visual condition. Guides, table, covers, and controls are well-preserved, as shown in the pictures. Ideal for companies looking for a robust and versatile milling machine. Inspection and demonstration are possible by arrangement. Further technical data, accessories, and information on travel distances, spindle speed, tool holder, year of construction, and operating hours can be provided upon request. Note: All information is provided to the best of our knowledge. Technical data and equipment features should be verified on the machine before purchase. Errors and prior sale are subject to change.

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503643 Machine type / Device type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating power: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K; pressure difference in the cooling water circuit at least 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Equipment includes: • Self-optimizing SBC microprocessor controller • Digital display of set and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault reporting • Acoustic alarm indicator • Operating hours counter • Heating control via solid state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Suction for tool change • Manual filling • Dirt filter • Unit mounted on rubberized casters • Connections: Mold hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L = 0.73 m, W = 0.27 m, H = 0.58 m Gujdpfxoxt Rc Hs Af Aef • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Gedpfexx Tmrjx Af Aouf Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring Guedpjx A Swdofx Af Aef • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Condition: good (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Gujdsytfgnepfx Af Asf Stock no.: 503558 Manufacturer: ENGEL Model: Victory 330-120 Tech Control system: CC100 Year of manufacture: 2007 Operating hours: 68,651 h Technical Data – Clamping Unit Clamping force: 1,200 kN Platen size (H x V): 740 x 680 mm Minimum mould height: 300 mm Maximum daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 825 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 1,600 bar Screw L/D ratio: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (L x W x H): 4.5 m x 2.1 m x 2.1 m Total weight: 7,300 kg Equipment Screen text in German CEE socket 16A Hydraulic core pull, 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Levelling elements Interface for ejector plate safety Schuko socket 10A Technical Data – Handling Machine type: Linear Brand: ENGEL Control system: ER-HLI41VC Year of manufacture: 2007

Condition: excellent (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, Stock No.: 503604 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 43331 h Technical Data - Clamping Unit Clamping Force: 2500 kN Tie Bar Distance h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 90 mm Ejector Force: 225 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Tool Weight: 3800 kg Technical Data - Injection Unit Screw Diameter: 45 mm Displacement Volume: 318 ccm Injection Pressure: 2470 bar Screw Length: 22 l/d Screw Stroke: 200 mm Screw Speed: 60 min Screw Torque: 1000 N Plasticizing Rate: 242 g/s PS Free Injection Flow Rate: 291 g/s PS Number of Heating Zones: 7 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 6.12m x 1.94m x 2.4m Total Weight: 12230KG Equipment Screen text in German CEE socket 16A Compact Flash drive Hydraulic core pull 2x Pneumatic core pull 3 x Machine including conveyor belt Machine including handling system Machine including safety enclosure Machine without material hopper Leveling elements Tool heating 12x Technical Data - Handling System Machine Type: Linear Robot Manufacturer: Arburg Gsdezfi Uxjpfx Af Ajuf Control System: Multilift Year of Manufacture: 2012 X-Axis: 400 mm Z-Axis: 1400 mm Rotation Axis C: 90 ° Total Weight: 450 kg

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature control unit plasma plasTemp Primus 90 Stock no.: 503644 Machine type / Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp temperature control unit Primus 90 / Compact TK-90-9-50 Guodext Rddspfx Af Ajf - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW, via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K, pressure difference in the cooling water circuit min. 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Self-optimizing microprocessor controller, SBC • Digital display for setpoint and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm indicator • Hour meter • Heating control via solid-state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Draining for tool change • Manual filling • Dirt filter • Unit mounted on rubberized castors • Connections: Mold hose nozzle G 1/2” (14 mm), cooling water hose nozzle G 3/8” (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water