Used Adjusting Instrument for sale (19,779)

Condition: used, General Description: This listing is for the Grant Instruments TXF200 Circulating Bath. The unit is in full working condition and ready for immediate use. This high-specification stirred thermostatic bath offers precise temperature control and an intuitive digital interface. Designed for versatility, it supports both internal and external circulation, making it ideal for calibration, cooling, and general laboratory heating tasks. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Godpfoyw Nicex Afwoua • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for the Biotek Instruments Gast 7103034 Vacuum Pump 2. The unit is in full working condition and ready for immediate use. Gedpfx Afeywzgtoweua This Gast-manufactured pump provides consistent vacuum performance for laboratory applications including filtration and aspiration. Featuring a compact, oil-less design, it ensures low maintenance and clean operation. It is ideal for integration with BioTek washers or general benchtop fluid management. Transparency Report and Technical Audit: - Source Pedigree: Biotech / Research Facility - Condition: Direct-from-Bench (Decontaminated/Original) - Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. - Integrity: 100% Original Parts (Non-Refurbished) - Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2022, condition: new, Manipulator with two height adjustable outriggers and face plate. Load: 1.500kg stroke: 800mm swivel range: 300 face plate diameter: 1.000mm Welding current: 600A Guodpfefnku Hjx Afwja

Year of construction: 2022, condition: new, Height adjustable rotary tilt table Load: 500kg Stroke: 1.015mm, height faceplate min. 345, max. tilt angle 120°. Face plate diameter: 800mm Welding current: 400A Torque face plate: 1.300Nm Total length: 2.365mm Height (housing): 1.030mm The rotary tilt table is controlled by pushbuttons on the machine housing with the following functions: - LIFT arm - Arm LOWERING - Potentiometer for the stepless SPEED- Godpfxjh Tfbzo Afwoua adjustment of the face plate For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, Height adjustable L manipulator Load: 500kg Stroke: 640mm, height faceplate min. 480, max. 1.110mm Pivoting range: +/-185 face plate diameter: 800mm Welding current: 400A Torque face plate: 900Nm Torque swivel arm: 900Nm Total length: 2.495mm Height: 1.855mm Width: 900mm The rotary stand is controlled by a hand-held remote control with the following functions: - LIFT arm - arm LOWER - Arm swivel RIGHT - Arm give LEFT - Potentiometer for the stepless SPEED- adjustment of the faceplate Guedpfx Afsh Td Thowea For the control of the face plate a two-pedal foot switch is available with the functions: - face plate rotation RIGHT - face plate rotation LEFT

Year of construction: 2022, condition: new, - Load capacity rotating stand: 1.000 kg - Machine body: Sheet metal construction made of quality steel, - length/width 1.000mm x 1.180mm - height 2.220mm - Stroke face plate (vertical): 700-1.400mm - diameter of face plate: 600 mm - Chuck: M-WPS500 - Machine weight (DSH): 1,400 kg - Face plate speed: 0.1- 2 rpm Operation on the control cabinet: Selector switch: Turn foot switch or Button on the control cabinet Turn: LEFT/RIGHT Lift: UP/DOWN) Potentiometer for infinitely variable speed control Foot switch: Turn: LEFT/RIGHT welding current transmission: 600A Godpfx Aofxw Dcefweua

Condition: new, Year of construction: 2026, load capacity: 1,200 kg, pivoting range: 120 °, Equipment: foot remote control, 1200 kg load capacity horizontal welding rotary table, CE certificate Godpfx Aek Adikjfwoua 1200 kg load capacity tilted very robust complete set speed continuously adjustable from 0.05 to 0.7 rpm, higher speed on request, surcharge €250 diameter rotary table 1200mm tilt up to 120° height horizontal 870mm, tilted to the middle 720mm hand and foot remote control length 1.35m x width 1.2m

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL SPECIFICATIONS - Tool diameter, Wescott chuck 0-20mm - Max hole depth 155mm - Max milling length 250mm - Drill unit adjustment front/back, right/left + angle - Table adjustment up/down - Table swivel angle 0-45˚ - Working table dimensions 600x320mm - Four-point head 16-22-25-32mm - Material clamps 2 pcs - Motor power 2.2kW - Dimensions (L/W/H) 1050x800x1250mm - Weight 200kg ADVANTAGES – German-made – Very good condition – Eccentric clamps, 2 pcs – Not repainted – Used drilling machine Godpfxjyrr D Re Afwsua Net price: 6,500 PLN Net price: 1,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2011, machine/vehicle number: JP - 0160201, Motorized welding and tilting table with height adjustment Ref. No. 26069 Technical Data: - Max. load capacity in horizontal position: 15,000 kg - Faceplate diameter: 1,800 mm Gedpfx Afoywtt Seweua - Faceplate motor-driven tiltable: 0 to 120° - Table height adjustable - Rotational movement electrically, steplessly adjustable: 0.04 to 0.80 rpm - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V / 5.5 + 7.5 kW - Minimum table height in horizontal position: approx. 1,700 mm - Intermediate table heights in horizontal position: approx. 1,900 + 2,100 mm - Maximum table height in horizontal position: approx. 2,300 mm - Handheld remote control - Required installation space: approx. W 2,100 x H 1,700 x D 2,400 mm - Weight: approx. 8,500 kg

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Gujdpow A Amrsfx Afwja Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Gjdpfxjrzfh Ho Afwoua Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: good (used), Year of construction: 2007, Blade length: 200 mm For plate thickness: 6 mm Hydraulically driven Gujdpfsyuyalsx Afwea Variable angle Machine weight: 1,200 kg

Year of construction: 2026, condition: new, We manufacture blowers for air supply to factory halls, barns, or any location requiring substantial air exchange. The air intake can be fitted with one or two pipes, and an adjustable air inlet can also be installed. Air inlets are available with adjustment options or with flange outlets. The air outlet comes with a flange for connecting pipes that transport air either from or into a room. Upon request, we can produce custom inlet or outlet ends. We can also manufacture blowers without smooth, electronic motor speed control. Entire unit is hot-dip galvanized. Motor: 5.5 kW (7.5 kW available upon request), 2800 rpm. Fabrication of steel bends and pipes is also possible. Guodpewt Ihcefx Afwea Equipped with an electronic motor speed controller. Shipping or pickup in Poznań. Net price. Price may be subject to change. We also produce pneumatic dispensers for dispersed concrete reinforcement, pneumatic grain conveyors, joint cord inserters, joint cleaning machines, and several types of milling machines for joint chamfering, as well as trowels and concrete discs.

Condition: used, Adjustment status for Weinig Powerlock Gedpfx Aoxga Ewefwoua

Condition: used, Adjustment status for Weinig Powerlock profile Gedpfx Afsxga Eqewsua

Condition: new, Year of construction: 2024, 1000 kg load capacity complete set incl. hand and double foot remote control Welding rotary table height adjustable with through hole 200mm plate diameter 900mm Height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Tilt up to 135 Gsdpsid Etisfx Afwsua hand and foot remote control with speed indicator very robust

Condition: new, Year of construction: 2023, Protec KT 3000 HV, Hydraulic height adjustable Load 3000 KG Manual remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm diameter faceplate 1400mm Tilt angle min. 135 Gedpoifw Hdjfx Afweua Speed 0,05 to 0,9 rpm. Motor power 3 KW

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation Gjdjl Dwnljpfx Afwsua to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless different heights The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with plate diameter 1000mm height min. 0,65m, max. 1,530m speed from 0,01 - 1,1 rpm inclination up to 135 hand and foot remote control with speed indicator very robust Gjdpfx Aod D D Hljfwjua

Condition: new, Year of construction: 2025, 1000 Kg load capacity welding rotary table adjustable in height with through hole 200mm plate diameter 900mm height horizontal min. 0,8m, max. 1,6m height tilted min. 0,6m, max. 1,4m speed from 0,1 - 1,2 rpm length 2000mm width 1000mm Inclination up to 135 hand and double - foot remote control with speed indicator very robust Gujdpfef Ezdcex Afwsa

Condition: like new (used), Year of construction: 2018, Rated Loading: 3000 Kg Rotating speed: 0,05 ~ 0,6 U/min Tilting speed: 0,5 rpm Worktable size: 1200mm Tilting angle: 0~120° Rotating Power: 1,5 Kw Hydraulik Motor Power: 3 KW Speed adjusting way: VFD Worktable height: 960mm ~ 1910mm Guedpodt Rhgefx Afwja Hydraulik system pressure 10 MPa

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Dimensions: height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm Godpfxok S D N Ej Afweua diameter of the clamping disk 2000mm length 3250mm, width 1780mm speed from 0,05 to approx. 0,6 rpm.

Condition: as good as new (ex-display), Year of construction: 2019, 1200 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 0,9 rpm Diameter turntable 1200mm inclination up to 120 height horizontal 950mm, tilted to middle 720mm Gjdpfx Afsfg Uv Hjwsua hand and foot remote control length 1,35m x width 1,2m

Condition: new, Year of construction: 2024, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Gujdpfjg Tdpgex Afwea Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display very robust

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass 1200mm up to 1900mm Gujdpjdvn E Usfx Afwoa