Used Adjusting Spindle for sale (32,309)

Condition: used, Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 1.65 m on a solid base frame, height adjustable -Roll width: 400 mm -Roller diameter: 57mm -Roller spacing: 195 mm -Height: 655 to 1140 mm, one foot is missing Guodeqzl Hmopfx Aihoh -Transport dimensions: 1650/500/H655 mm -Weight: 27 kg

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 with SK40-S20x2, suitable for DECKEL milling machine FP1, FP2, FP3, or FP4 Maximum speed: 6000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Gujdefxg T Uspfx Aihjh Overhang: 110 mm (machine spindle to clamping nut) Tool holder: SK 40 - S20x2 Collets: Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm in a wooden storage box The head is equipped with bronze gears for high torque. Weight: 5 kg Total weight: 9.4 kg in good condition

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drilling head, drilling gearbox Gedpjdz A Tpjfx Aihjuh -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 275-HD-283-112-4 -Manufacturer gear Lenze type: 12 435 28 10 HU -Manufacturer Motor Bauknecht Type: 112M R 4 / 4-75 -Motor power: 4 KW -Speed range: 7.4-42.3 rpm -Motor: adjustable -Number: 1 piece of motors available -Price: per piece Gujdpfx Asd D Nfksihoh -Hollow shaft: Ø 70 mm -Dimensions: 620/600/H560 mm -Weight: 152 kg

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Godpfx Aiexp Ru Ujhjuh

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic Gujdpfjxy Hqaox Aihjh -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/270/H330 mm -Weight: 8.6 kg

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Griesheim, machine cutting torch, flame cutting machine -Type: Quicky Electronic -Cutting speed: adjustable -Voltage: 220 V 40 W -Dimensions: 520/280/H300 mm -Weight: 7.2 kg Guodpfxjxy Hr Rs Aihsh

Condition: used, 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 1-Spindel-Papierbohrmaschine / 1-head spindle Paper Drilling Hang 136 Serial-No. 60654 Seitenanschlag  Side stop for fine adjustment Godpfx Asxu T Alsihouh Tiefenanschlag / Depth stops for fine adjustment Stapelhöhe / Stacking height max. 50mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: Jung, machine spindle -Type: MP 5z -Speed: max rpm -Recording: Dimensions see photos Guodpfew Dbyyex Aihjh -Dimensions total: 460/210/115 mm -Weight: 16.2 kg

Condition: used, Adjustment status for Weinig Powerlock profile Gsdpfoxga Eqjx Aihouh

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Gedpfswudhuex Aiheuh Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 1976, TOYOSK 0-R fixed spindle pitch high speed 12-spindle fine thread drilling machine Year of manufacture: 1976 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Spindle diameter: 8mm Gedpfx Ajwifgujihouh Table feed: 65mm Table surface: 200x260mm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanical, small holes / threads. Power: 0.75kW Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Year of construction: 2011, Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, n-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Fanuc, AC Spindle Motor -Type: A06B-1513-B200 -Power: 26 to 45 kW -Speed: 1500 to 6000 rpm -Technical data: see photo type plate Guedpfxswvfa Is Aihoh -Shaft: Ø 60 x 140 mm -Dimensions: 880/320/H410 mm -Weight: 286 kg

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp Gsdpfx Aiju N Sh Dohjuh -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 Gedpfxjvq Ibxe Aihsuh Acu Rite digital readout Machine lamp Coolant tank Longitudinal stop Rear chip guard Chuck guard

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Gedpfxovbcydj Aihjuh Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Stöber type RD11-1003 Gusdpfx Aijv Avu Rohsh -Motor manufacturer: ABB Motors Type M2AA071A -Engine power: 0.37 kW -Speed range adjustable: 64-641 rpm -Shaft: Ø15 x 40 mm -Dimensions: 450/210/H180 mm -Weight: 15.7 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 9813, SECOND-HAND SPINDLE MOULDER SAC MOD. TS 110 - CE RULES - Working table mm. 2400 - Volt 400/50 - S/N 9813 - Year 1998 Guedpswrh Hvsfx Aihjh

Condition: used, Year of construction: 1997, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT P23E - CE RULES - Horizontal bottom 5.5Kw - Vertical right/left 7.5Kw - Horizontal top 7.5Kw Guodpewrxuwefx Aihoh - Horizontal bottom 4Kw - Year 1997 (CE)

Condition: used, Year of construction: 2002, SECOND-HAND 5+1 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 FORTEC - CE RULES - ATS device - 1st horizontal botom Gedpfewrx Nbox Aiheuh - 2nd vertical right - 3rd vertical left - 4th horizontal top - 5th horizontal bottom - 6th universal - Working width mm. 230 - Cardan feed - Year 2002

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers Guedsy Nm Erspfx Aihsh

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Point to point Through-feed CNC boring machine HIRZT MERIS K2, Year 2010 - Working width up to 870mm - Working length, no limit - Working thickness up to 40mm - Configuration: 14 + 4 + 2 pcs. drilling units + routing unit 5 sides drilling Gedoz Ag E Nspfx Aihjuh - Automatic panel positioning - Automatic unloading system to return the panel to the operator or move forwards as a through-feed machine. Machine ready for loading M: 0030 6934 522 577 Sotiropoulos Nick

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm Guedpfx Aiezuyxaehjh - Runs in both directions (left/right) - with Haffner feed unit - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Fanuc A06B-0831-B230 AC spindle motor, serial number: C988K0401, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Guedpfx Aiezvafcshsh

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Guodpfx Aszwfxkjihjh Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.