Used Adjusting Spindle for sale (32,446)

Condition: new, Year of construction: 2026, HOFMANN TFS 107 Table milling machine with swivel adjustment +/- 45.5° 7.5 kW motor, 400 V, 50 Hz, Table size 1,200 x 815 mm, heavy-duty ribbed cast iron table, with table rings Electronic start and braking system Electric height and swivel adjustment in rapid and slow mode accurate to 1/10, height adjustment approx. 145 mm, Swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601, efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with quick-release nut "fix" Left/right rotation, machine socket, arc milling guard type TAPOA, Iisdpfx Apezyf Ike Dsh Hofmann "Centrex". Includes options: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Stepless speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, - HOFMANN milling fence type 2620, including quick-release system for the fence jaws, digital display - 2 cast iron fence jaws 500/500 mm - Control panel moved upwards - Tool compartment for TFS 107

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface Iisdpfx Apezwg Tio Djh - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Iiedsiknp Rjpfx Ap Doh Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Iijdpfx Aoz Ag Ansp Djh Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: new, functionality: fully functional, Year of construction: 2026, Tilting Spindle Moulder CORMAK WS1000TA is a technologically advanced machine designed for professional woodworking in carpentry, furniture and production workshops. With a tilting spindle, a large cast iron table and a precise tool guidance system, the machine enables efficient and accurate machining of straight and profiled wooden components. Main advantages of the machine Tilting spindle from +5° to -45° – allows for bevels, rebates and special shapes to be machined. Large, heavy-duty cast iron table – ground and polished for smooth glide and work stability. Four-speed spindle control: 1,800 / 3,000 / 6,000 / 9,000 rpm – flexibility for various materials and tools. Rigid steel frame structure – ensures vibration damping and precision even under heavy load. Spindle stroke 100 mm and maximum tool diameter 180 mm – suitable for a wide range of cutters. Precise spindle and stop adjustment – enables accurate machining and dimensional repeatability. Easy tool change – optimised spindle access reduces setup time. Construction and technology The CORMAK WS1000TA spindle moulder is designed for durability and functionality in serial production. The machine body is made of thick-walled steel sheets, ensuring rigidity and resistance to deformation. The main table 1,000 × 360 mm and optional sliding table 1,000 × 240 mm allow efficient handling of long workpieces. The motor power 2.8kW (S1) / 3.9kW provides the energy needed for solid wood and wood-based materials machining. Precision and performance The machine allows for precise milling operations, including angular machining. The tilting spindle enables non-standard operations, while the accurate column spindle guide eliminates play and improves surface finish. The V-belt transmission ensures quiet and stable operation across the full speed range. Applications The CORMAK WS1000TA spindle moulder is ideal for: professional carpentry workshops, production of door and furniture components, machining of tenons, grooves, rebates and decorative profiles, angled and curved milling with a suitable attachment. Standard equipment 30 mm spindle Side and top pressure hold-downs Precision milling fence Curved milling attachment Angle stop User manual CE Declaration of Conformity Optional accessories* Sliding table (1,000 × 240 mm) – shown in the photos Mechanical feed systems Special protective covers and guiding systems *The price quoted applies to the machine only, excluding optional/additional equipment, installation, transport and training — please contact our consultant for more details. Technical data Iiodpfsycu Awex Ap Deh Spindle diameter [mm] 30 Spindle speed [rpm] 1,800 / 3,000 / 6,000 / 9,000 Spindle stroke [mm] 100 Table dimensions (L × W) [mm] 1,000 × 360 Sliding table dimensions (optional) [mm] 1,000 × 240 Table height [mm] 900 Max. cutter diameter [mm] 180 Spindle tilt [°] +5 to -45 Motor power [kW] 3.9 Motor power S1 100% [kW] 2.8 Weight [kg] 270 Warranty [months] 12 User manual included

Condition: used, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Year of manufacture: 2001 Colour: Grey - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - CE marking present: Yes - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Isdpsymlahefx Ap Deih Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2007, operating hours: 60,000 h, functionality: fully functional, travel distance X-axis: 240 mm, travel distance Z-axis: 450 mm, chuck outer diameter: 381 mm, spindle speed (min.): 2,500 rpm, turning diameter: 580 mm, total length: 2,900 mm, total height: 2,770 mm, total width: 2,700 mm, turning length: 450 mm, turning height: 450 mm, overall weight: 13,000 kg, Equipment: documentation/manual, Used DOOSAN Mecatec V450TM twin-spindle CNC vertical turning centre, fitted with FANUC Series 18i-TB CNC control. The machine has been modified with two SAUTER VDI50 tool turrets, each offering 12 tool stations and driven-tool capability (24 tool positions in total). C-axis. Turret arrangement supports combined turning, drilling and milling operations. Isdpfx Aoz Sx Nksp Dsih

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Ijdpfx Aoz S Nc Ujp Djih Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Iisdpfez Ag Absx Ap Doh Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, Iodpfx Apsz R R Tts Dsih I am offering for sale a Felder F900Z Z under-spindle milling machine. The machine is in VERY GOOD condition – it has been used less than it has been standing idle. It is a robust machine, ideal for precise woodworking. Its condition can be seen in the photos; it is ready for immediate use and has no hidden defects.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. >Included in the supply: Ijdez Nlzzepfx Ap Djih Spare electro-spindles Spare B-axis motors Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly.

Condition: excellent (used), Year of construction: 2010, I sell the vertical wood shredder Comafer MAC 600S Year 2010 Cylinder system with knives sindle Motors 11KW Including full documentation and CE Isdpfxsz Suz Nj Ap Deih Condition like new. Avialable immediately.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Ijdpfxez Hlplj Ap Djih

Condition: used, Year of construction: 2018, Technical details: Iodpoz Sr Dujfx Ap Djih weight of the machine ca.: 3,5 t

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Iodpfx Apozuc T Tj Deih Specifications, information, price, images, etc. can be found in the PDF documents attached.

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Made in Romania Year of manufacture: 1986 Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm - Main motor power: 22 KW Iisdpfx Aeumtbrjp Djh - Machine weight ab. 6,3ton The machine is in good condition. The electric equipment was changed with new one. For more information please contact us.

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. Ijdpoztwr Ijfx Ap Djih - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: good (used), Year of construction: 1989, power: 22 kW (29.91 HP), with electric saw blade adjustment Iisdpfx Aezv Uyujp Djh chain width 230 mm motor 22 kW max. cutting height without pressure comb in fixed position: 130 mm max. cutting height without pressure comb with movable blade: 95 mm with pressure comb: 15 mm less cutting height still in good condition

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 Iedpez R Dt Eefx Ap Djih - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1963, Rigid milling machine Year of manufacture: 1963 Spindle diameter 30 mm Availability: at short notice Storage location: Röllbach Iedpfx Aezk N Iijp Doih

Condition: new, New lathe with large spindle bore. Brand : KMS Isdpfxshhm Edo Ap Deih Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Iiedpfx Apsz Ryabo Djh Storage location: Nattheim

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Iedjz Nggrjpfx Ap Deih

Condition: used, Year of construction: 1998, overall weight: 80 kg, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Nameplate present AC spindle motor, made in Japan, Mitsubishi Electric Isdezq Atljpfx Ap Doih 4-pole, 3-phase, AMP input 200-230V, 50/60Hz, IP 44 Frame B112FU IEC 34-1 1994, Manual No. BNP-B3759 Ambient temperature 0-40°C The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,950.00 net, ex works, plus packaging costs. Subject to technical changes and errors. Sale exclusively to countries within the EU.

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device Ijdpozzci Uefx Ap Djih