Used Adsorption Dryer for sale (1,732)

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace. Dksdpefz U Hvsfx Al Usn

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Dry air dryer with granulate silos and material separator Manufacturer: Piovan Type: DSN521NE No.: ODE 6242 4 insulated granulate silos, each 200 L Dodpfex Na Itox Al Ujkn With additional heater 3 material separators Manufacturer: Colortronic This system has been fully tested for all functions and is fully operational! PRICE REDUCTION FROM 6450 TO 6000 EUR!!!

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, Equipment: documentation/manual, Tesoma Compact-Eight-G-18-HH-SR - Conveyor Dryer (Gas Connection) Air and Exhaust Data Duct diameter: 150 mm Exhaust airflow: approx. 900 m³/h Temperature: max. 180 °C Pressure drop: max. 100 Pa Fresh air supply: approx. 1,800 m³/h (total) Dimensions & Weight Dimensions (L x W x H): 10,900 x 2,840 x 1,142 mm Total weight: 4,000 kg EQUIPMENT Documentation/manual Exhaust stacks (double-walled stainless steel, approx. 7.5 m each) Djdsy Ry U Nopfx Al Uekn Ideally suited for digital print products (DTF, transfers). Price includes double-walled stainless steel exhaust stacks (approx. 7.5 m each). The machine is installed and connected. It can be inspected on site by appointment. Price is negotiable and applies only to the as-installed system. Price does not include dismantling, reassembly, or delivery costs. On request, a contact can be provided who can organize dismantling, transport, and installation if needed.

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984 Dkodpewpi Rkofx Al Ujn

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 400 V, input current: 13 A, type of input current: AC, temperature: 95 °C, inner dimension length: 10,000 mm, inner dimension width: 3,000 mm, inner dimension height: 3,300 mm, total length: 10,500 mm, total width: 4,000 mm, total height: 3,800 mm, fuel type: electric, Equipment: CE marking, documentation/manual, Drying chamber / Recirculating drying chamber / Wood drying chamber / Drying system Dkedpfx Aloy Sxw Eo Ujn Mühlböck QLSF2120 Technical data: Year of construction: 2007 Heating capacity: 190 kW Supply temperature: 95 degrees Electrical connection: 13A Fans: 6 x 0.75 kW

Condition: like new (used), Year of construction: 2019, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, type of input current: three-phase, temperature: 260 °C, inner dimension length: 1,250 mm, inner dimension width: 1,250 mm, inner dimension height: 2,000 mm, total length: 1,680 mm, total width: 2,120 mm, total height: 2,960 mm, fuel type: electric, Equipment: CE marking, documentation/manual, We are offering this as-new Nabertherm KTR 3100 chamber dryer, year of manufacture 2019. The chamber dryers of the KTR series are suitable for a wide range of drying processes and heat treatments of batches at application temperatures up to 260 °C. Thanks to the powerful air circulation system, optimal temperature uniformity is achieved within the usable space. - Tmax 260 °C - Electrically heated (via heating registers with integrated stainless steel heating elements) Djdpfx Alsy R Tbis Uskn - Temperature uniformity in accordance with DIN 17052-1 up to +/− 3 °C (for models without drive-in tracks) - High-quality mineral wool insulation, resulting in exterior wall temperatures < 25 °C above ambient temperature - Exclusive use of insulation materials not classified according to Regulation (EC) No 1272/2008 (CLP). This means that no aluminosilicate wool, also known as RCF fiber, is used, which is classified and possibly carcinogenic. - High air exchange rate for rapid drying processes - Double-leaf door - Adjustable temperature limiter with selectable shut-off temperature as overtemperature protection for both the oven and the goods - Intended use according to the operating manual If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, comprises: 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Heating medium – electric Installed electrical power for both dryers: approx. 210 kW --- 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is equipped with a laminar hot air flow directed opposite to the panel feed direction and features adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h (heating register 90 kW) --- 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW The in-line hot air dryer is suitable for rapid evaporative and curing processes. This dryer is equipped with a laminar hot air flow in the opposite direction to the panel feed with adjustable recirculation air. • Total length: 7,500 mm Dsdpfx Ajw H Aw Sel Uskn • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Installed electrical power: 115 kW • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Output electrical power: 1.5 kW – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h • PR antifreeze protection system for one heating register, with probe and automatic damper control --- 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to high air velocity. The air handling unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h - Digital ventilation setting via touchscreen - Air knives installed across the entire tunnel width - Air knife exit speed max. 32.5 m/sec • Total length: 3,000 mm • Useful width: 1,300 mm • Total width: 1,783 mm • Pass-through useful height: 80 mm • Max. tunnel height: 1,780 mm (conveyor excluded) • Installed electrical power: 4.5 kW • Machine control via 5.7" LCD touch screen • TT 4000 bar conveyor with double chain, steel guides and chrome-plated bars --- 4. CEFLA TR 3000 Roller Conveyor • Powered rollers with PVC coating • Length: 3,000 mm • Photoelectric sensor for thin panels, thickness 4 mm (Specifications subject to change and errors excepted; prior sale reserved)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL Year: 1999 (1990) POLYMERIZATION SYSTEM. Consists of 2 UV dryers: Dryer 1 Overall length: 2100 mm Overall width: 2339 mm Workpiece sizes: min. 250x20 mm, max. 2500x1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: each lamp 80 W/cm² Radiation length: 1400 mm Lamp power: 2 x 11.2 kW Air-cooled housing, output: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Belt conveyor Venjakob, year 1999, type Novo 40 Length: 2100 mm Working width: 1300 mm Working height: 880 - 920 mm Feed: 0.75 kW Feed speed: 4 – 20 m/min (line 2 - 4 m/min) Dryer 2 Overall length: 3340 mm Overall width: 2339 mm Workpiece sizes: min. 250x20 mm, max. 2500x1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: each lamp 80 W/cm² Radiation length: 1400 mm Lamp power: 2 x 11.2 kW Air-cooled housing, output: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Belt conveyor Venjakob, year 1999, type Novo 40 Length: 3340 mm Working width: 1300 mm Working height: 880 - 920 mm Feed: 0.75 kW Feed speed: 4 – 20 m/min (line 2 - 4 m/min) Common control cabinet for both drying tunnels: 2000 x 1600 x 600 mm Operating voltage: 400 V, AC, 50 Hz, 3-phase Total power consumption of the complete UV system approx. 50 kW Operating side of the system: left Total weight of the complete system: approx. 2500 kg Dkjdpfjyalc Nex Al Ujn (Technical data subject to change and errors excepted. Prior sale reserved.)

Condition: excellent (used), Year of construction: 2011, Dry air dryer FarragTech CARD 10 S with container and 2 x suction conveyors ICEVA GS-4mD Stock no.: 503577 Machine type / Device type: Dry air dryer Manufacturer: FarragTech GmbH Type: CARD 10 S Year of construction: 2011 Container volume: 10 ltr. Throughput: 2 h / 3.25 kg / 80° ABS Dksdpfxsy Akk Se Al Usn Power: 1.1 kW Voltage: 230 Volt Hopper volume: 70 ltr Accessories: 2x suction conveyors ICEVA GS-4mD

Condition: like new (used), CATALOG NUMBER 7969 TECHNICAL SPECIFICATIONS - Motor power: 11kW - Tank capacity: 500l - Noise level: 70dB - Max pressure: 10 bar - Performance: 1500 l/min - Performance: 90 m3/h - Voltage supply: 400 V / 50 Hz / 3 Ph Djdpfx Aey Dfydsl Uekn - Dimensions (L/W/H): 1920x750x1600mm - Weight: approx. 420kg ADVANTAGES – Manufactured by the Polish company GUDEPOL – Screw compressor is equipped with a microprocessor control panel, informing the user about the compressor's operating mode – Not painted – Used machine – In excellent condition Net price: 16,900 PLN Net price: 4,030 EUR (at a rate of 4.2 PLN/EUR) (Prices may change with greater exchange rate fluctuations)

Condition: used, functionality: unexamined, The belt dryer was not put into operation by me; it was purchased used. It is being sold as used, without warranty or liability. Dkedeyf Uhlopfx Al Uon The right switch cabinet door is damaged (hinges torn out).

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Dry air dryer Manufacturer: Motan Model: Luxor LA/8-200 Connected load: 6 kW Dry air volume: 200 m3/h With vacuum pump VACOM Model: VC 340-720 Power: 4.6 kW With central filter and Motan control Silos for granulate: 1 x 150 L 4 x 60 L Material conveying units: Manufacturer: Motan Dkodpfx Asyvfkrel Uen Model: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 8500 TO 8000 EUR!!!

Condition: new, Year of construction: 2025, machine/vehicle number: TR0042_ALM_RD56, COMPRESSED AIR DRYER ALMIG ALM-DGO 180 Type: ALM-DGO 180 Delivery quantity: 3.00 m³ / min * * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 5 ° C -Constant pressure dew point from +3° to +5°C for maximum process reliability. -Minimal pressure lice ensures immediate energy savings -Short start and response times ensure fast availability -Optimized heat exchanger design for maximum efficiency -Robust design for reliable continuous operation -Refrigerant R513a: efficient, environmentally friendly and durable Dkjdpfx Aljy Rqw Us Usn -Low space requirement Max. working pressure 16 bar Max. inlet temperature 70°C Min./max. ambient temperature +5 to +50°C Pressure drop: 0.18 bar Ø power consumption: 0.47 kW Voltage/Frequency: 230V/50Hz Compressed air connection 1" Dimensions: L x W x H: 462 x 399 x 541 mm Weight: 34 kg For new machines, convenient leasing via our house bank is possible. Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2026, power: 1.5 kW (2.04 HP), input voltage: 400 V, total length: 600 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 300 kg, pressure: 9.8 bar, tank capacity: 50 l, warranty duration: 12 months, HySpriz RK50U 3-in-1 Forming System for Meat Snacks, Pet Sticks & Mini Salami | Up to 1500kg/shift Made in Ukraine. 18 month full warranty. RK50U — universal casing-free forming system for meat sticks, jerky & sausage production HydroShpriz RK50U is a powerful piston-driven filling and forming machine engineered for small and mid-size manufacturers starting production of meat sticks, salami snacks, pet food, kibbeh, fruit bars, and more. Ideal for dry-cured snacks without alginate casing. Strong, compact, and easy to operate — it’s the perfect choice to start your line and grow with Trade-In options. ⸻ Technical specifications • Drive: hydraulic piston • Piston force: 94 kN • Power: 1.5 kW, 380 V, 50 Hz • External dimensions: 1050×550×950 mm • Weight: approx. 300 kg • Material: full stainless steel, food-grade • Certification: CE certified, built for continuous 8-hour production cycles ⸻ Configuration & possibilities • Gearbox-driven filler for thick and sticky emulsions down to –2 °C • Multi-nozzle head: up to 25 lanes simultaneously • Round nozzle set: 8 mm to 22 mm for meat or fish sticks • Flat nozzle set: 25 mm to 200 mm width, 3–5 mm height — ideal for jerky/strips • Sausage stuffing set: for traditional casing sausages • Overhead tray holder: for direct forming onto drying racks • Trolley integration: fits perfectly with our 30-row drying racks (60 trays) • Integrated time-based portioning unit with ±8% accuracy • 24V remote signal: compatible with automatic clippers (PolyClip, Compa, etc.) • Optional vacuum connection: for better product density and shelf-life ⸻ Production capacity • From 20 kg to 1,600 kg per 8 hours depending on product shape, tray format and nozzle type ⸻ Dkjdpjmrpvyjfx Al Ujn Availability ✔️ In stock at official distributors in: • Austria • Poland • United Kingdom • Lithuania • Australia • South Africa • United States Delivery worldwide. Training, test batch, and spare parts included. ⸻ Made in Ukraine. CE sertified industrial forming system • meat snack production • pet food production • jerky, salami, kebab machine • food processing equipment

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Dsdpfjy Nkqxex Al Uekn Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Djdoygvniepfx Al Uekn

Condition: used, For sale is a Kaeser BS50 compressor, year 1987, 380V, 10 bar, approx. 17,800 operating hours, approx. 7,212 load hours. Including Kaeser refrigerated dryer TD51, year 2008. Including air receiver 3,000L, year 1980. Regularly serviced. Offered as a package for €4,900 upon collection. Forklift available for loading assistance. Individual units can also be purchased if required. Dsdpfx Alexvzrko Ujkn

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Dkjdeinur Aepfx Al Uen Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Used Atlas Copco FD310 refrigerated dryer Dksdpoym Ub Uefx Al Ujn 18.60 m³/min 14 bar Year of manufacture: 2011.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Dkjdoy Ny U Tspfx Al Uon

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Completely stainless steel Dkedpeh Eazzofx Al Usn Container Max 180mm wide & 250 hight as-is or tested and adjusted to costomer needs

Condition: new, machine/vehicle number: Katalognummer: 1.515-400.0, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, warranty duration: 24 months, water tank capacity: 25 l, Technical specifications: Condition - NEW! Catalog Number: 1.515-400.0 Drive type: Battery (not included in the set) Drive: Propulsion by brush rotation Brush working width (mm): 430 Vacuum working width (mm): 750 Fresh/dirty water tank (l): 25 / 25 Theoretical area performance (m²/h): 1720 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 30 – 40 / 22.5 – 28 Water consumption (l/min): max. 2.7 Sound pressure level (dB(A)): 66 Color: anthracite Dkjdpfsxnptgsx Al Usn Total weight with water (kg): 115 Weight without accessories (kg): 40 Dimensions (L) × W × H) (mm): 1135 × 520 × 1025 Scope of delivery and features: The set does NOT include batteries or a charger. V-shaped 750mm suction bar with oil-resistant polyurethane rubber. Disc brush 430mm red - medium-hard. Features: 2-tank system. The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: Self-explanatory symbols and a clear control panel. Solenoid valve for automatic water stop after releasing the deadman's switch. Simple operation thanks to a small number of yellow-coded controls. Very maneuverable and easy to handle. Excellent visibility of the area to be cleaned. Designed for daily use. Robust, durable, and reliable device.

Condition: new, machine/vehicle number: 1.127-001.0, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 139 kg, warranty duration: 24 months, water tank capacity: 50 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.127-001.0 Drive type: Battery Drive: Propulsion by brush rotation Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank (l): 50 / 50 Theoretical area performance (m²/h): 2040 Battery type: GEL - maintenance-free Charger power supply (V / Hz): 230 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Color: anthracite Total weight with water (kg): 139 Dkjdpfx Alexnyhno Usn Weight without accessories (kg): 40 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Scope of delivery and features: SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER V-shaped 900mm suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Features: 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and clear control panel. Solenoid valve for automatic water stop after releasing the dead man's switch. The machine is easy to operate thanks to a small number of yellow-coded controls. - Highly maneuverable and easy to use. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning tools can be carried. - Very good value for money.

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 6.2 kW (8.43 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 150 °C, total length: 600 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 150 kg, number of chambers: 1, control type: CNC control, Equipment: CE marking, documentation/manual, Tank capacity: 100 litres Heating capacity: 4.5 kW Blower output: approx. 0.85 – 0.95 kW Total power: 6.2 kW Airflow: 90 m³/h Dkedpsy N T Utefx Al Usn Maximum drying temperature: 150 °C Operating voltage: 400 V / 50 Hz Transport height: up to approx. 3000 mm Unit weight: approx. 130 – 150 kg Dimensions (W x D x H): approx. 950 x 600 x 2000 mm 3 units available Price: 1,350 EUR / unit

Condition: used, ALTO Encore L 2426 Shower suction machine / 24 VDC / 75A / IPX 3 / Weight 395 kg Dkodpfx Ajg Ngmxel Usn