Used Adsorption Dryer for sale (1,781)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dksdjzw Apgjpfx Aa Hew Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Dsdey Iplfspfx Aa Hekw Ex Pharma Facility

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Dry air dryer with granular material silo and material separator Manufacturer: Piovan Type: DSN521NE No.: ODE 6242 4 insulated granular material silos, each with a capacity of 200 L Equipped with an additional heater Dksdpfx Aex Na Itsa Hsw Material separator, 3 units Manufacturer: Colortronic This system has been inspected for all functions and is fully operational! PRICE REDUCED FROM 6200 TO 5500 EUR!!!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 7 kW (9.52 HP), input current: 16 A, input frequency: 380 Hz, temperature: 70 °C, overall weight: 2,000 kg, fuel type: electric, Equipment: documentation/manual, Selling an Incoplan Dry 6, manufactured in 2018. Djdpfx Aaj Ah Ikyo Hokw 7 kW electrical output. 8 m chimney. Inverter for wind speed regulation. 2000-liter hot water storage tank. 100 kW wood-fired boiler. Total price: 25,000 EUR. Tel: 00 36 70 619 08 06 (Viber, Whatsapp)

Condition: used, Year of construction: 1998, Used ultrat​​roc SD 0630 refrigerant dryer from ultrafilter for drying compressed air. The unit was manufactured in 1998 and features an integrated condensate drain. Manufacturer: ultrat​​roc GmbH Drucklufttechnik / ultrafilter Type: SD 0630 / 914 Year of manufacture: 1998 Max. permissible pressure, compressed air side: 16 bar Max. permissible pressure, refrigerant side ND/HD: 16 / 20 bar Max. permissible temperature, compressed air side: 60 °C Permissible ambient temperature: +2 to +50 °C Operating voltage: 230 V Phases: 1/N Frequency: 50 Hz Rated power consumption: 1.130 kW Protection class: IP20 Refrigerant: R134a Dedo Ahy Nwspfx Aa Hjkw Max. refrigerant charge: 1.250 kg Max. fuse rating: 16 A Features: Condensate drain

Year of construction: 2004, condition: ready for operation (used), machine/vehicle number: 12800/280.2005, The device is made of stainless steel, is in good working order, and is stored in a dry and warm hall. Technical documentation is available in paper form, in German and English. Key technical data is provided below: Drying drum diameter: 1200 mm Electrical heating power: 84 kW Drum length: 4000 mm Drum rotation speed: Continuously adjustable Dedpj Ahgp Rofx Aa Hskw Drive motor power: 0.75 kW Extrudate drying capacity: 240-550 kg/h Description: The system offers highly efficient infrared drying through the use of electro-quartz elements – radiators made of high-quality quartz glass and coated with a gold reflective layer. The drum rotates on silent support rollers, the system meets safety requirements, and reduces energy losses. Heating radiators are available, currently disassembled.

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. Dodjz Rz Dnjpfx Aa Hskw • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 500 h, Equipment: CE marking, documentation/manual, FrostX 50 Freeze Dryer – 2026 – Very Low Operating Hours For sale is a FrostX 50 freeze dryer, manufactured in 2026, from our food processing business. The machine was delivered in May 2026 and has only been used for a limited number of production and test runs. It is in very good condition and fully operational. Equipment / scope of supply: - FrostX 50 freeze dryer - Year of manufacture: 2026 - Very low operating usage - Original product trays - Tray transport cart - Silicone mats - Manufacturer documentation and operating instructions available The unit is suitable for freeze-drying food products and other suitable materials. Further technical specifications are available in the manufacturer documentation. The machine can be inspected and demonstrated by appointment. Reason for sale: Reorganisation of our production concept as part of a planned capacity expansion. Price: EUR 34,900 net, negotiable Dodpfxe Agpgms Aa Hekw Location: Germany Loading can be organised or assisted by prior arrangement. Transport can be arranged by the buyer or discussed individually. Further photos, technical documentation and additional information are available upon request for serious enquiries.

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection value: 6 kW Dry air flow rate: 200 m3/h Dkodpfxoyvfkrj Aa Hjw Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 6750 TO 6000 EUR!!!

Condition: excellent (used), functionality: fully functional, Granulate dryer with two drying containers, including KOCH material conveying equipment and suction lance. For sale is a used drying system for plastic granules with two drying containers and associated material conveying equipment. The system was used at an injection molding company for pre-drying PA6. Equipment and scope of delivery: - Two insulated drying containers on a common steel frame - One KOCH-TECHNIK vacuum conveying unit mounted on each container for material feeding - Large side cleaning openings with a sight glass for level monitoring - Material outlets at the bottom of the containers - Analog temperature indicators at the air connections - Separate drying unit with fan, filter, and control cabinet - Digital temperature controller GOSSEN D1 - Control panel with operating and fault indicators, as well as indicators for drying and regeneration Dsdpfxj Afb Alo Aa Hokw - Existing air piping and connecting hoses - Suction lance with conveying hose The side cleaning openings provide good access to the inside of the container. Drying containers and drying unit are mounted on separate steel frames. Condition: Used, with visible signs of wear and tear due to age and use. Scope of delivery as described and shown in the pictures.

Condition: used, Year of construction: 2016, Two used, air-cooled compressed air refrigeration dryers in good external condition, with inspection labels valid until 2025. Manufacturer: Ingersoll Rand Model: D1890EC-A Series: D-EC Premium Efficiency Machine type: Compressed air refrigeration dryer Year of manufacture: 2016 / 2017 Air flow rate: 31,500 l/min (1,890 m³/h) Electrical power: 6.79 kW Voltage supply: 400 V / 3 phases / 50 Hz Refrigerant: R407C Refrigerant charge: 4.2 kg Maximum air inlet pressure: 13 bar Maximum refrigerant pressure LP/HP: 18 / 29 bar Air inlet temperature: +5 to +60 °C Ambient temperature: +2 to +45 °C Dkodpe Ahyn Djfx Aa Hsw Sound pressure level: 78 dB(A) Connection size: 3 inches Control: Electronic control with digital display Cooling: Air-cooled Condition: Used, good external condition Inspection: Inspection labels valid until 2025 are available Available quantity: 2 Location: Rehweiler

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Produced in 2019. Dedpfx Aaovrd Uqo Hskw Like new.

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. Dksdpfx Aaoz D Efne Hjw (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: good (used), Year of construction: 2003, functionality: fully functional, Recirculating dryer from Piovan Dkodpfx Ajx Dx E Dja How Type G31 Heating power 1.6 kW Material hopper from Piovan Type T30IX

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 12800/283.2005, The unit is made of stainless steel, is in good working order, and is stored in a dry and warm hall. Technical documentation is available in paper form in German/English. Key technical data is provided below: Drying drum diameter: 1200 mm Electric heating power: 84 kW Drum length: 4000 mm Dksdpo Agftfofx Aa Hjw Drum rotation speed: Continuously adjustable Drive motor power: 1 kW Extruded material drying capacity: 240-550 kg/h Description: The system offers highly efficient infrared radiation drying, thanks to the use of electro-quartz elements – radiators made of high-quality quartz glass and coated with a reflective layer of gold. The unit is made of stainless steel, and the drum is coated with a PTFE layer, ensuring the processing of exceptionally sticky, coated extruded materials. The drum moves on silent support rollers; the system meets safety requirements and reduces energy losses.

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 6.2 kW (8.43 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 150 °C, total length: 600 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 150 kg, number of chambers: 1, control type: CNC control, Equipment: CE marking, documentation/manual, Tank capacity: 100 liters Heating capacity: 4.5 kW Dkjdpfxoy N T Ute Aa Hjw Fan power: approx. 0.85 – 0.95 kW Total power: 6.2 kW Airflow: 90 m³/h Maximum drying temperature: 150 °C Operating voltage: 400 V / 50 Hz Transport height: up to approx. 3000 mm Device weight: approx. 130 – 150 kg Dimensions (W x D x H): approx. 950 x 600 x 2000 mm 3 units available PRICE REDUCTION FROM 1350 TO 1200 EUR per unit!

Condition: used, Year of construction: 2006, functionality: fully functional, The desiccant air dryer, model Card 40 S, from Ferratech is for sale. Heating capacity: 1.1 kW Volume: 40 liters Dkodpfx Aozvulqoa Hsw

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant air dryer Manufacturer: Motan Type: ADC 200/10/20 Connection value: 5.6 kW Dry air volume: 200 m3/h Dsdoyvfibopfx Aa Hskw 5 material silos Manufacturer: Motan Type: BC-30 Ltr. Additional heating: 1.55 kW 5 material conveying units Manufacturer: Motan Type: HLS-06-1-A000-0 PRICE REDUCTION FROM 5500 TO 5000 EUR!!!

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: SLHJ-120LK/100, functionality: fully functional, operating hours: 10 h, power: 10.85 kW (14.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,320 mm, total width: 840 mm, total height: 1,680 mm, fuel type: electric, Equipment: CE marking, documentation/manual, SML SLHJ-120L-100 dry air dryer, compact design. Combines drying, dehumidifying, and transporting of granules. Suitable for hygroscopic plastics and optical applications. Technical specifications: - Drying hopper capacity: 120 L Dods Ad Ey Eepfx Aa Hskw - Drying rotor air volume: 100 m³/h - Drying heating power: 5 kW - Drying blower: 0.75 kW - Regeneration blower: 0.18 kW - Regeneration heating: 3.2 kW - Transport blower (vacuum): 1.1 kW - Pipe diameter: 38 mm - Dimensions (L x W x H): 1265 x 850 x 1680 mm - Weight: 324 kg Features: - Closed dehumidification circuit; dry air does not come into contact with outside air - Closed transport system; dried material does not absorb moisture during transport - Shut-off valve in the transport pipe; no residual material remains in the pipe - Double-walled, insulated drying hopper - Heat exchanger for low temperature and dew point of the process air Available for immediate delivery from stock in the Netherlands.

Year of construction: 2019, condition: excellent (used), BINDER FD 720 laboratory dryer – 2019 – Very good condition We offer a BINDER FD 720 laboratory dryer from 2019, manufactured by the renowned German company BINDER GmbH. The unit has been used very little and is in very good technical and visual condition. The internal chamber, made of stainless steel, is clean and well-maintained, and the housing shows only minimal signs of use. The FD 720 model is a professional laboratory dryer with forced air circulation, designed for drying, heating, and heat treatment of materials in laboratories, industry, and research institutions. Technical data * Manufacturer: BINDER GmbH, Germany * Model: FD 720 * Year of manufacture: 2019 * Chamber volume: 720 liters * Maximum temperature: 300°C * Air circulation: forced, fan-assisted * Rated power: 4.50 kW * Power supply: 400 V, 50–60 Hz, three-phase * Rated current: 16 A * Temperature protection class: 2.0 according to DIN 12880 * Degree of protection: IP20 * Serial number: 20190000016313 * Country of origin: Germany Key advantages * Large working chamber with a capacity of 720 liters * Forced air circulation ensuring uniform temperature distribution * Electronic temperature controller * Stainless steel interior * Adjustable shelf positions * Overheat protection * Robust industrial design * Very good visual condition and minimal signs of use Dodpo Ah Sr Sofx Aa Hjkw Condition of the unit The dryer is from 2019 and has been used very sparingly. The unit is complete, well-maintained, and in very good condition, as confirmed by the attached photos.

Condition: used, Year of construction: 2019, Format: 2000 x 950 mm Equipment: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A Dksdpoyzruijfx Aa Hew weight 650 KG

Condition: used, Granulate dryer, homogenizer Stainless steel mixing tank with liftable, heatable lid. Manufacturer: Essiccatore Granplast Type: AS2 Overall dimensions: 800 x 950 x 1900 mm Dksdpfxj Aidvvs Aa Hsw Tank size: diameter 800 x 200 mm

Condition: good (used), Year of construction: 2011, Refrigerant dryer, Kaeser, TE 91 – used: Price ex-works: €1,750 (net) plus dismantling costs, etc. Manufacturer: Kaeser Type: TE 91 Year of manufacture: 2011 Article number: 1.8008.50010 Serial number: 3027 Refrigerant: R134a Refrigerant charge: 1.950 kg Operating pressure: 18 bar, or 16 bar Max. operating pressure, air system: 16 bar 400V/3/50Hz Dkedpfxez Sd Iys Aa Hew Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, volume flow: 858 m³/h, total width: 1,060 mm, total length: 1,530 mm, total height: 1,513 mm, pressure: 16 bar, overall weight: 600 kg, operating pressure: 16 bar, input voltage: 400 V, type of cooling: air, pressure (max.): 16 bar, power: 1 kW (1.36 HP), input frequency: 50 Hz, Equipment: type plate available, compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Dkjdpoyfpbtefx Aa How Length: 1530mm Width: 1060mm Height: 1513mm Weight: 660

Condition: good (used), Code: 0519 Brand: ISVE Model: JUN 5 Vacuum dryer for wood (e.g. oak/ chestnut/ beech/ cherry/ walnut/ pine/ fir and various) Description: Dkjdpfj Ah T Tnjx Aa Hew The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping. The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks which, in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension High drying speed Trolley opening Capability to dry different types and grades of timber Capacity m3 0,7 Installed power Kw 3,5 Absorbed power Kw H 0,95 Drying times (see table) Overall dimensions mm 6000 x 900 x 1300 h Weight kg 550