Used Airless Spray for sale (1,995)

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit Dkjdpfxsz Sp Ane Ai Eow - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Condition: used, mileage: 450,000 km, power: 338 kW (459.55 HP), first registration: 02/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, total length: 9,800 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Comfort and Equipment:* MAN Media Package Navigation SD Europe * MAN Media Truck Advanced radio with 7" color display * Bluetooth / Navigation / Bluetooth / * Hands-free system for 2 mobile phones * Air conditioning: AC R134A CFC-free with automatic temperature control * Auxiliary heating: EBERSPÄCHER D4S auxiliary heater * Central locking * RIO Connectivity Box ----Cab:* * Model: XLX, medium-height high roof, 2440 mm wide, 2280 mm long * Driver's comfort seat: Air-suspended with lumbar support, shoulder adjustment, and heating * Passenger seat: Static, adjustable in length, backrest angle, and height * Interior: Urban Concrete design, carpet on engine tunnel * Cooler box: Under the bunk, fully retractable * Bunks: 2 pieces with storage space, mattresses on top and bottom, bunk underlay * Instrument panel: High-Line, colored, km/h display * Steering wheel: Adjustable in height and inclination, multifunction steering wheel * Interior lighting: Red/white * Ambient lighting, reading lights for driver and passenger * Door window lifts: Electric for driver and passenger * Grab handles: Left and right on A and B pillars * Storage compartments: In door armrest, on the back wall of the cab with swan-neck light, control module, alarm clock, and charging station * Cup holders: In the dashboard * Drawers: 2 extendable in the center of the dashboard ----Lighting:* LED daytime running lights * Halogen double headlights H7 * High and low beam headlights, fog lights with cornering function * Work lights ----Safety:* MAN BrakeMatic (Electronic Braking System) * Disc brakes for front and rear axles * Emergency Brake Assist 2 (EBA2) * Anti-lock Braking System (ABS) * Anti-Slip Regulation (ASR) * Electronic Stability Program (ESP) * Lane Guard System IV (LGS IV) * Hill start assist * Emergency brake signal: ESS * Speed limiter: Electronic 85 km/h * Cruise control: Available ----Other Features:* Air horns * Spray suppression * First aid kit, warning triangle, hazard warning lights * 2 wheel chocks * Smoker's package ---- * Engine: D2676LF52 - 460 hp / 338 kW EURO6 SCR - 2300 Nm * Transmission: MAN TipMatic® 12 26 DD with Retarder 35 * Transmission software: MAN TipMatic® Profi (on-road) * Tag axle, steered & liftable * Trailer coupling ROCKINGER 400G150A * Preparation for retrofitting a PTO ----SDG Multi-change chassis body * Bridge mounting angle (Multi) Dksdpo Ah Az Hjfx Ai Esw ----Technical Data:* * Front springs: Air * Rear springs: Air * Tire dimension front axle: 315/70R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 780 liters * AdBlue tank: 60 liters * Technically permissible total weight: 26500 kg * Tare weight: 10110 kg * Permissible trailer load: 26470 kg * Overall length: 9800 mm * Wheelbase: 4800+1350 mm * Next inspection due: 08.2026 ----Vehicle Number/Vehicle: 11583----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.----We would be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicleTÜV/inspection clearanceComplete export processingArrangement of financingApplication for export license platesVehicle transportationVehicle registrationRecovery and vehicle transport----YOUR VTS TEAM

Condition: new, empty load weight: 7,214 kg, maximum load weight: 31,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, color: white, Year of construction: 2026, Equipment: ABS, Unladen weight: 7214 kg, permissible gross weight: 39000 kg, certificate DIN EN 12642 (Code XL), cargo space (L W H): 13,625 mm x 2,480 mm x 2,700 mm, cargo space volume: 91 m³, air suspension, underrun protection, lift axle, electronic braking system EBS, toolbox, ferry lashings, bolted chassis, connection plug 1x15 and 2x7 pole, anti-spray, telematics system, tire pressure monitoring, you can find our entire vehicle range at [website address]. Do you want financing? With our Value Added Services, we offer you individual financing options, full-service and telematics services. We will gladly advise you. Dksdo Ah A U Depfx Ai Eew

Condition: used, Year of construction: 2018, operating hours: 607 h, Ammann ARX26, manufactured in 2018, with only 607 operating hours! ---- * Manufacturer: Ammann Dodpfxs Aiabqo Ai Eskw * Type: ARX26 * Year of manufacture: 2018 * Operating hours: approx. 607 * Yanmar diesel engine * Water spraying system * Operating weight: approx. 2,460 kg * Working width: 2.6 meters * Video available upon request (WhatsApp Erik) * Price: 12,500 Euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, subject to errors and prior sale.

Condition: used, mileage: 304,692 km, power: 183 kW (248.81 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 6,900 kg, maximum load weight: 7,100 kg, overall weight: 14,000 kg, axle configuration: 4x2, wheelbase: 5,175 mm, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,284 mm, loading space width: 2,491 mm, loading space height: 2,490 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, traction control, Unladen weight: 6,900 kg, Permissible total weight: 14,000 kg, Cargo area (L W H): 7,284 mm x 2,491 mm x 2,490 mm, Cargo volume: 45 m³, Fabric seats, Pneumatic leaf spring suspension, Digital tachograph, Low noise: CEE 92/97, Electronic Stability Program (ESP), Anti-slip regulation (ASR), Adaptive cruise control, Comfort driver's seat, Air-suspended driver’s seat, Driver’s armrest, Heated driver’s seat, Radio/CD, Multifunction display, Bluetooth phone connectivity, Lane keeping assist, Multifunction steering wheel, Driver’s lumbar support, Electric windows, Roof spoiler, Electrically adjustable and heated mirrors, Immobilizer, Central locking with remote control, Rear differential lock, Underrun protection bar: front, Sun visor, Twin tyres, Spare wheel, Hill start assist, LED daytime running lights, Speed limiter, Emergency brake assist, Anti-spray device, CURTAIN-SIDE BODY WITH CANOPY AND DROP-SIDE WITH 1,500 KG TAIL LIFT. Djdpfe Aiabxex Ai Ejkw

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The refrigerant gas exits the compressor and flows to the air inlet connection of the ATC-E condenser. Heat from the refrigerant is transferred through the heat exchanger tubes to the water that flows downward through the tubes. Simultaneously, air is drawn into the air inlet grilles at the base of the condenser and flows upward over the heat exchanger, counter to the water flow. A small portion of the water evaporates, and heat is removed from the system. The warm, moist air is drawn by the fan to the top of the evaporative condenser and released into the atmosphere. The remaining water falls into the collection basin at the bottom of the condenser, where it is recirculated through the water distribution system and flows down over the heat exchanger. Thermal-Pak II Heat Exchanger EVAPCO's Thermal-Pak II heat exchangers, featuring a patented design, ensure maximum cooling capacity. The airflow through the heat exchanger is countercurrent to the fluid flow, resulting in the most efficient heat transfer process. A specially designed heat exchanger is used to reduce air pressure drop across the unit while maximizing the tube surface area and increasing the heat transfer capacity. Elliptical return bends provide more circuits per heat exchanger bundle and increase the maximum capacity per footprint. The heat exchanger is located in the airflow, resulting in an increase in the dry-bulb temperature. CrossCool internal tube enhancement increases fluid turbulence and provides additional evaporative capacity. Available in type 304 SS or type 316 SS construction. Drift eliminators Limit drift rate to no more than 0.001% of the recirculated water flow rate. Minimize the risk of Legionella spread. Constructed with an inert polyvinyl chloride (PVC). Superior air inlet louvers and screen design. Constructed with an inert polyvinyl chloride (PVC). Two-tier design that minimizes drift loss and the potential for algae growth in the tower. Framed in steel in easily removable sections. Pressurized water distribution system EVAPCO's zero-maintenance ZMII® spray nozzle remains clog-free, allowing for even and consistent water distribution. This makes it the best-performing, corrosion-resistant, and maintenance-free water distribution system in the industry. ZMII spray nozzles have a 1-1/4" diameter opening and a 1-1/4" transparent splash plate. Mounted in corrosion-resistant PVC water distribution piping with threaded end caps. Provides unparalleled heat exchanger coverage and scale prevention. Stainless Steel Water Basin Available in type 304 or type 316 stainless steel. Covers the entire area of the water basin, including the supporting columns and the frame of the louvers. Welded water basin seams for leak-free operation. Stainless Steel Housing and Fan Available in type 304 or type 316 stainless steel. Covers the entire upper section, including the fan shroud. Djdpfx Ais Ag Id To Ejkw Stainless Steel Thermal-Pak II Heat Exchanger Available in type 304 or type 316 stainless steel. The stainless steel heat exchanger offers superior resistance to corrosion in harsh environments and is available within EVAPCO's standard delivery time! The EVAPCO 304 STT heat exchanger option can be manufactured as an ASME heat exchanger.

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition Dkedpfx Aiez Slkve Ejw • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, empty load weight: 168 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 10/20-4M HOT WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Cleaning agent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H, mm): 1330 x 750 x 1060 EQUIPMENT: Dkodpfs Ah Siqox Ai Esw NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED (FREE) KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for water-softening agent (RM110) prevents corrosion and limescale buildup within the heating coil and other internal plumbing. An exhaust gas temperature sensor shuts off the engine if the temperature exceeds 300°C. When the eco!efficiency mode is activated, the unit heats the water to 60°C, which allows for effective cleaning—even of heavy soiling—while simultaneously reducing fuel consumption by approximately 20%.

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. Dkjdpfxs Ah Simj Ai Eew 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 695 M Eco HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 170 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the pictures. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 800 Operating pressure [bar]: 170 Max. Heating temperature [°C]: 85–155 Connected load [kW]: 5.9 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance Dsdpfxj Ah R Uke Ai Eskw NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and easy to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal lines.

Condition: new, power: 375 kW (509.86 HP), first registration: 01/2026, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electronic stability program (ESP), navigation system, onboard computer, traction control, - Leaf spring suspension - Brake booster - Differential lock - Air-suspended seats - Radio/CD - Sun visor EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. MAN TGS 26.520 BB 6x4 EURO 6e Concrete pump EuromixMTP SWAN TSP 38-5 RZ Initial registration date: 12/2025 Vehicle equipment: MAN TipMatic 12.28 OD - MAN TipMatic Offroad, -TipMatic Efficiency, 300 l fuel tank - 35 l AdBlue tank High-performance engine brake MAN EVBec, adjustable MAN EasyStart hill start assist Differential locks on driven rear axles Suspension type leaf/leaf (BB) on front axles and driven rear axles Sun visor, in front of windshield Windshield wiper control, automatic, with rain sensor (rain sensor wiper system) Daytime running lights, LED - High beam assistant - Work lights on the rear of the cab Exterior mirrors, electrically adjustable, heated Driver's comfort seat, air-suspended - armrests for driver's seat Multi-function steering wheel, adjustable in height and inclination Preparation for toll collection system Toll Collect EuromixMTP - Concrete pump SWAN TSP 38-5 RZ Model: SWAN TSP 38-5 RZ Section: Concrete pump: Max. theoretical concrete capacity: m³/hr Max. theoretical concrete pressure: 85 bar Stroke rate 30 per minute Delivery cylinder: Ø230 mm x 2100 mm stroke Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm Concrete valve: S-valve, water pump: 20 l/min - bar Water tank: 600 l, 12 m hose with spray gun Concrete hopper: 600 liters Lubrication: Lincoln automatic lubrication for hopper group Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28 Rexroth A17FO045, Blau Ascend AP 20.140/115 Switching system: Magnetic sensor (proximity switch) Switching box: DIGITEX, waterproof Remote control: Scanreco remote control + 30 m cable Section: Boom: Boom S 38-5 (boom with 5 sections, RZ folding) Type: RZ folding Max. vertical reach: 37.5 m (without end hose) Max. horizontal reach: 32.7 m (without end hose) Dedjzfy Ebjpfx Ai Eokw End hose: 3 m single flange, DN 125 Platform type: X-type Slewing bearing: 365 degrees Slewing speed: 0.3 RPM Diameter of delivery line: 125 mm (outer diameter 132 mm) 5.5" flanges & couplings Control system Support width front: 6.3 m Support width rear: 8.2 m Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica | ...

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1000042371, functionality: fully functional, Biesse Akron 1130 J Machine Number 1000042371 Year of Construction 2020 Panel height mm 8 - 50 Dkjdpfo Ahuqpjx Ai Esw PVC/ABS mm 0.4 - 3 Multi-Velocity Kit 9 m/min Adjustable working height Variable inlet guide Side roller with idle wheels for panel support RT01 grinding group Coiling plate Infrared lamp to heat the edge SP01 hot-melt adhesive bonding group Edge pressure group on straight profiles with pressure rollers IT01 tilting adjustment unit RF01 2-axis tilting motor group AR01 multifunction rounded-edge group (edge trimmer + deburrer) RB01 edge scraper group RC01 glue scraper group SZ01 brush group ADZ01 anti-adhesive spray group Electrical and mechanical predisposition for PUR adhesive system Pro-Nesting Kit LPT01 cleaner liquid nozzle spray group

Condition: used, functionality: fully functional, machine/vehicle number: 36518, mileage: 44,900 km, power: 175 kW (237.93 HP), first registration: 02/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary as some vehicles are currently in rental use! Additional similar vehicles available upon request. Dkedpjy Rnk Sefx Ai Esw Right-hand drive, 6-cylinder OM 936 engine, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t, air suspension with differential lock, lane assist, Active Brake Assist, hill start assist, underrun protection, reversing warning tone, daytime running lights, rain sensor, light sensor, plastic toolbox, tank capacity: 125 l, AdBlue 8l. Cab with 2 seats: driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote, immobilizer with transponder, cruise control, digital tachograph, sun visor, reversing camera. Hydraulically driven turbine, steplessly adjustable, tank made entirely of stainless steel, additional manual pump for lifting the container, weight display, operating hours counter, sweeping hours counter and water indicator (remaining volume 300 l), automatic water supply cut-off when lifting the sweeping units and when reverse gear is engaged, acoustic signal in the cab when container is raised, 2 LED beacons + 2 LED work lights, sound insulation in equipment compartment, left/right sweeper unit, dual-sided intake, dual sweeping system, sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, trailing disc brushes with steel bristles, diameter 700 mm, adjustable disc brush tilt (joystick right and left), roller brush with mixed polypropylene and steel wire bristles L=1500 mm, diameter 400 mm, disc brush spray nozzles, continuous front spray bar with 6 nozzles, 3 nozzles per disc brush, 6 nozzles in suction mouth, 5 nozzles on sweeping roller, wild weed brush type 'C' mounted on right, water system for cleaning upper suction shaft with external water connection, stainless steel leaf grid, area approx. 2 m², pneumatic lifting/lowering with vibration mechanism, turbine wheel made from 8 mm Hardox 700, housing dome made from integrated Hardox AISI 316, filling via hose with check valve, Wilden water pump, P1, diaphragm pump, dry-run safe, leaf suction system at rear, reversing camera with monitor in cab, PM 10, broom and shovel holder, cable remote control.

Condition: excellent (used), Year of construction: 2009, operating hours: 18,493 h, functionality: fully functional, Base machine CTX alpha 500, driven tooling, G-axis, measuring probe in X-axis Control system: Siemens CNC control system SIEMENS 8400 ERGOLine Options Opposing spindle ISM as. C, Y-axis, instead of tailstock Coolant and chip disposal Coolant system 8/20 bar, 600 L, band filter Coolant spray gun Equipment for bar machining Package for bar machining CTX alpha 52 mm Main spindle reducing sleeve Short bar loader magazine, IRCO, ILSRBK 100/12 Clamping device for main spindle 3-jaw chuck, BBD 21066, manufacturer SMW Collet chuck KSZCC 60, manufacturer SMW Clamping device for opposing spindle Collet chuck KSZCC52, manufacturer SMW 3-jaw chuck, BBD 170-52, manufacturer SMW Documentation Documentation, delivery list, technical documentation DMG Powertools DMG Netservice - on board Special designs Swiveling scraper for chip conveyor, manufacturer Bürener, SP63/30225 Tool spindle, 90° angular geared double spindle head, 2 pieces, 105465 Drill bar holder, 6 pieces, 085822 Multiple holder, form 2, 1 piece, 114008 4-fold holder for Y-machine, 1 piece, 1530200Y Multiple holder, form D130x20, 4 pieces, 114013 Reducing sleeve, 8 mm, 2 pieces, 100244 Reducing sleeve, 10 mm, 2 pieces, 100245 Reducing sleeve, 12 mm, 2 pieces, 100246 Reducing sleeve, 20 mm, 3 pieces, 100248 Djdps Ahi Ngefx Ai Ejkw Reducing sleeve, 25 mm, 2 pieces, 100249 90° adapter, left, 2 pieces, 0E5390 90° adapter, right, 2 pieces, 085407 Cylindrical shank holder, form E230X25, 1 piece, 113985 Tool holder with cylindrical shank, form E3/E430x25, 4 pieces, 113880 Actuating key for dovetail, nut ER25, 1 piece, 105762 Collet chuck holder d=32, ER25, 2 pieces, 107846

Condition: used, empty load weight: 10,430 kg, axle configuration: 3 axles, first registration: 05/2018, next inspection (TÜV): 10/2025, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2018, mileage: 254,845 km, Equipment: ABS, Tomvekt: 10430kg, Lasterom (L B H): 13.410 mm x 2.490 mm x 2.700 mmdekkdimensjon: 385/65 R22.5, Lasteromsvolum: 90 m³, Foraksel: , 2. aksel: , 3. aksel: , Luftfjæring, Underkjøringshinder, Elektronisk bremsesystem EBS, Tilkoblingsplugg 1x15 og 2x7 pin, Anti-spray, 410 external 270 internal height18t king pin810 wheelbaseCarrier Vector 1950Mt Cooling unitMOT/PKK 27.10.25, Dsdpfx Aiswwbdrs Eskw

Condition: used, empty load weight: 8,993 kg, maximum load weight: 33,007 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2020, next inspection (TÜV): 03/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 8,100 mm, color: white, Year of construction: 2020, mileage: 238,270 km, Equipment: ABS, Tomvekt: 8993kg, tillatt totalvekt: 42000kg, Apoteksertifisering, Lasterom (L B H): 13.403 mm x 2.490 mm x 2.700 mmdekkdimensjon: 385/65 R22.5, Lasteromsvolum: 90 m³, Foraksel: , 2. aksel: , 3. aksel: , Luftfjæring, Underkjøringshinder, Boggi, Elektronisk bremsesystem EBS, Tilkoblingsplugg 1x15 og 2x7 pin, Anti-spray, Schmitz cooling unit, 15.144 diesel hrs, 192 el hrs, 270 internal, 410 external height, 18t king pin, 8100mm wheel baseMOT/PKK 18.03.2026, Dkodpfxoyr Ua Is Ai Eow

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing. Dedpfx Aozw T Sxsi Ejkw

Condition: used, Year of construction: 2014, Pair of Sames brand Reciprocators complete with pistols with rotating cups (glasses not included) Ransburg brand (year 2014), Sames generators, pump and control panel Dkjdpj Ahgnzjfx Ai Eow

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. Dkodpfx Aoyx U N Dji Ejw - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Please contact us for further information. Price on request!

Condition: new, Year of construction: 2025, functionality: fully functional, Brinox BWS707 Pharma Parts Washing Systems – new, unused, in original packaging – year of manufacture 2025 NEW PRICE in 2025: 681,988.64 euros for both systems Manufacturer: Brinox Model: BWS707 / BWS707 SRL Year of Manufacture: 2025 Condition: New, unused, and in original packaging Quantity: 2 systems Price: upon request For sale are two new, unused, and original-packaged Brinox pharma washing systems from the BWS707 series. The systems are no longer needed and are therefore being offered for sale. The single-chamber washing systems are used for cleaning, rinsing, and drying pharmaceutical production parts and accessories. The pass-through design with separate loading and unloading sides enables integration between different production and cleanroom areas. Cleaning is carried out via rotating spray arms as well as a connection for internal cleaning of suitable washing baskets. Technical equipment according to project documentation: Washing chamber approx. 700 × 700 × 800 mm, width × height × depth Two vertically moving doors with separate loading and unloading sides Rotating spray arms at the top and bottom Connection for internal cleaning via suitable washing baskets Media connections for WFI, purified endotoxin-free water, diluted sodium hydroxide, and nitric acid Compressed air connection Drying with heated, HEPA-filtered air Conductivity monitoring during the rinsing processes Siemens PLC CPU 1515 Siemens MTP1500 Unified Comfort Panel SCADA system with Siemens IPC627E and GE iFIX 2022 Recipe management and electronic process reports Audit trail and electronic signature functions Electrical connection: 400 V, 3NPE, 50 Hz Dkjdpfj Afbnzex Ai Eow System identification: System 1: BWS707 SRL, serial number 1008373 System 2: BWS707, serial number 1008374 Documentation: Technical documents, functional descriptions, operating manuals, installation plan, and photos are available. An EU declaration of conformity is available for System 1. Scope of delivery: The specific scope of delivery, including washing baskets, transport carts, control computers, and software licenses, will be specified in the offer. The type of heating and system-specific connection data will be confirmed before the contract is concluded. We will gladly provide you with further information, technical documents, and photos upon request.

Condition: used, Year of construction: 1997, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 96108, total length: 3,000 mm, total width: 2,500 mm, total height: 2,800 mm, overall weight: 3,000 kg, water consumption per time unit: 10 l/min, inner diameter: 1,400 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 5 bar, reception height: 1,000 mm, input current: 50 A, injection pressure: 4 bar, temperature: 50 °C, heating capacity: 30 kW (40.79 HP), power: 37 kW (50.31 HP), load capacity: 80 kg, operating pressure: 4 bar, empty load weight: 2,000 kg, Equipment: documentation/manual, Offered for sale is a spray cleaning system with an aqueous cleaner, featuring a two-stage spray cleaning process with a spray pressure of 4 bar. Dodpj Ah Hl Ujfx Ai Ejkw The basket is rotated or pivoted. Basket dimensions: L x W x H 815 x 565 x 525 mm. Throughput: approximately 4 baskets/hour. Fluid capacities: Washing 350 liters / Rinsing 250 liters. Heating capacity: Washing 18 kW, Rinsing 12 kW. Program sequence controlled by a PLC. Exhaust air for fume extraction: approximately 500 m3/h. Accessories: 240 liters of liquid cleaner + 30 liters of rust protection.

Condition: reconditioned (used), Year of construction: 2023, operating hours: 36 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 TB510 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) 2023 model year; 36 hours of operation 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger simplifies daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and a new suction hose New suction motor ensures high water pickup performance from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah gel batteries (2x) NEW 24V 400W suction motor Dodpfx Aisz Eh R No Eekw NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing work interruptions for refilling The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: used, Year of construction: 2022, machine/vehicle number: AH00003901, functionality: fully functional, input voltage: 400 V, input current: 37 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 60 mm, height adjustment type: electric, actuation type: electric, overall weight: 2,650 kg, Equipment: CE marking, documentation/manual, used SCM Stefani KD edgebander in HP configuration, year 2022. The machine is in excellent condition and can be seen running. Units: RT/E pre-milling unit with diamond cutters (H 64 mm) VC800 gluing unit with pre-heating for EVA glue Automatic edge feed from coil and strips K/SEL end trimming unit, tilting 0–15° R-HP Multiedge tilting trimming unit for 2 radii (4-axis positioning) Round K corner rounding unit R-HP Multiedge radius scraper for 2 radii and RAS/V scraper Dkedpfxj Aifpws Ai Eow RCA/2C flat scraper Buffing brushes Additional equipment: Startouch 12" control, ready for a barcode reader Top pressure belt instead of wheels, which protects matt and gloss panels Easy Size (automatic infeed fence positioning) Spray units for anti-adhesive, cleaning and gliding agents Infrared ceramic lamp 1700 mm extendable support for workpieces up to 2200 mm wide Copying wheel kit for nesting panels CE Technical data: Feed speed: 10–20 m/min Panel thickness: 8–60 mm Coil edges: up to 3 × 45 mm Solid wood edges: up to 8 mm

Condition: used, Year of construction: 2017, operating hours: 21,000 h, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 15,000 rpm, spindle speed (min.): 20 rpm, table width: 1,100 mm, table load: 1,200 kg, table length: 3,200 mm, CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Dedpfx Aio Agr A Us Ejkw Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 138/1-703 15509125, functionality: fully functional, input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, total height: 2,230 mm, total length: 8,755 mm, total width: 2,416 mm, overall weight: 4,200 kg, Edge bander (for laminated boards): Year of manufacture: 2017 Type: LUMINA 1586 PREMIUM Serial number: 138/1-703 15509125 Control system: HOL-HER EDGECONTROL TOUCH PPC 319 Adhesive technology used: EVA hot melt adhesive in granular form (GlueJet, interchangeable station), L-Tronic laser (interchangeable station) Units: pre-milling cutters, gluing station, pressure unit, trimming saw (two motors, with pneumatic angle adjustment), milling units (for straight and radius edges), edge rounding unit (2 motors, CNC-controlled), sanding units (profile and flat), infeed system (NC axes), polishing unit Workpiece thickness: 8 mm – 60 mm Minimum workpiece width: 150 mm Maximum edging thickness: 15 mm Maximum edging thickness in roll form: 3 mm Maximum edging height: 64 mm Machine length: 8.755 m Width with retracted roller support: 1830 mm Width with extended roller support: 2416 mm Dksdpfxoz I R Sno Ai Eow Minimum height: 1814 mm Maximum height: 2230 mm Workpiece infeed height: 877 mm Machine weight: 4200 kg Electrical minimum connection power: AC 400 V 50 Hz + N … 18A Compressed air, working pressure: 6 bar Compressed air, maximum pressure: 8 bar Chip extraction, connections: 2x Fi 120 mm, 2x Fi 140 mm Zero joint: infrared Electric height adjustment: YES Top conveyor belt pressure unit: YES Maximum feed rate: 25 m/min Infinitely adjustable feed rate: YES Preheating zone: YES Spray nozzles: YES Machine documentation: YES Operating hours: 8,788 h Total number of edged panel sides: 1,138,998 pieces Total length of edged material: 966,123 m Complies with all relevant provisions of the following EC directives: Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU