Used Altendorf Duplex for sale (97)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel Njdpfew I Uxcex Ag Isku - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Nodpfx Agexcg Hgo Ijku Length of the rolling table 2800 mm cutting width 1440 mm Motor output 7,5 kW Cutting height 150 mm Saw blade diameter 450 mm weight of the machine ca. 1200 kg range L-W-H 3,2 x 3,4 x 1,7 mm

Condition: new, Year of construction: 2023, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 204 mm, height adjustment type: electric, table height: 910 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 550 mm, slide length: 3,200 mm, Equipment: motor brake, rotational speed infinitely variable, Altendorf F45 EvoDrive Year of manufacture 2023, new machine - Template holder on the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm Nkjdpfx Agjvw S Hfe Iou - Motor 5.5 kW (7.5 HP) VARIO (infinitely variable speed control) - Preparation for 2-axis scoring saw - Table top extension 840 mm - Double roller carriage length 3200 mm - Angle miter stop - CNC parallel stop 1300 mm - Front support roller

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 150 mm, cutting width (max.): 1,000 mm, cutting length (max.): 3,200 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width Nkodpfexuquljx Ag Iju · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: new, Year of construction: 2025, F 35 Type 3 - 1000 5.5 kW (7.5 HP), 3 speeds Motorized height and tilt adjustment Large safety guard Double roller carriage, 3,200 mm Scoring unit with LED lighting CNC rip fence, cutting width 1,000 mm Angle-mitre fence 3,450 mm, without length compensation Table extension/table width extension: With premium CDF surface The solution for precise and versatile tasks. This saw impresses with its single-sided tilting saw blade, ideal for precise cutting of wood-based panels, solid wood, and even wood-like profile materials. Its solid machine base, made of robust 10 and 5 mm steel sheets, ensures stability and durability. With the proven double roller carriage featuring the Altendorf system, and motorized adjustments for the saw unit's height and tilt, we set new standards in precision and handling. A particular highlight is the intuitively operated eye-level control panel (tiltable and swiveling), equipped with a touchscreen, making operation and monitoring a real pleasure. Technical features Nedpfx Aexrc R Tjg Ioku 15" touchscreen (19:6) Double roller carriage, 3,200 mm Electromotoric tilt and height adjustment 0 - 46° of the main saw blade, max. 154 mm Main drive with 3 speeds (3,000/4,000/5,000 rpm) Main saw blade diameter 300 - 450 mm Large safety guard Perfectly tailored for maximum flexibility and user comfort. The F 35 Type 3 is a flexible and convenient panel saw, ideally suited for modern businesses. With a motorized rip fence and optional DIGIT L or LD as well as interpolating axis movements, it offers high comfort and precision. A large modern display for controlling functions supports easy handling of this machine. The scoring unit, including LED lighting for the danger area and the optional RAPIDO system, ensures clean cutting results.

Condition: excellent (used), Altendorf F45 Panel Saw Nkodpfx Agoxc Et So Iou Sliding table length: 3200 mm Cutting width to the right: 1300 mm Scoring unit Max cutting height: 120 mm Electric adjustment of saw blade tilt up to 45° Electric lifting and lowering of the worktable Main motor power: 5.5 kW Scoring motor: 0.75 kW Saw blade speed variable via belt: 3000/4000/5000 rpm Max saw blade diameter: 400 mm CE certificate

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 74-4-10, functionality: fully functional, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Nksdpfx Agjipvrbs Ieu Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm Nsdjwrfmaspfx Ag Ieku (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: good (used), Year of construction: 1990, functionality: fully functional, Circular saw Altendorf F 45 Year of construction 1990 Manufacture: Altendorf Germany carriage length: 3200 mm Manual height and angle adjustment rip fence 1250 Scoring unit 0.75 kW Motor power: 5, 5kW 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 with scorer 350mm Upper intake guard Altendorf Nkjdpfsr Eq Spjx Ag Iou Automatic motor brake Weight approx. 1200 kg Technical data subject to change

Year of construction: 1986, condition: good (used), Sizing saw Altendorf TRK 45 Year of manufacture 1986 S/N 86-9-209 checked in our workshop for normal operating condition carriage length: 1350 mm Nkodpfxong Etrj Ag Ieu height and swivel adjustment manual with handwheel engine power: 5,5kW cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 ( without scorer ) with scorer Automatic engine brake weight approx. 1100 kg Technical specification under reserve + 2 additional saw blades

Condition: reconditioned (used), Year of construction: 2022, machine/vehicle number: GM010.0310, functionality: fully functional, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,300 mm, Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Nedpfxow I Rtcs Ag Ieku EQUIPMENT Extendable cross-slide table widening Display DIGIT L

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, cutting length (max.): 2,900 mm, Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Nedpfx Agjwynhpe Isku Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: reconditioned (used), Year of construction: 2003, power: 5.5 kW (7.48 HP), cutting length (max.): 3,200 mm, cutting width at rip fence: 1,350 mm, Equipment: scorer, with scoring motor 0.73 kW, sliding table 3200 mm, mechanical parallel fence up to 1350 mm, power consumption 13.5A 400V 50Hz, max. saw blade diameter 400 mm, main motor 5.5 kW, extraction port 1x D=120 mm 1x D=80 mm, electric height adjustment, electric angle adjustment – as returned by customer Nsdpfxewt A Ecs Ag Ioku

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, Power rating: 380V 5.5kW Nedev Uqa Ejpfx Ag Ioku Star-delta switch Edging carriage length: 3200 mm Height adjustment and tilting via handwheel Cutting width: 1000 mm Parallelogram guard with narrow cover Cross table with stop Rip stop Scoring unit WITHOUT miter stop

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Nedpjwrb U Tsfx Ag Isku

Condition: good (used), Year of construction: 1985, machine/vehicle number: 85-10-116, functionality: fully functional, Equipment: scorer, Machine no: 85-10-116, Type: TKR 45 Table: 1400X400mm Vorrizer, Nkjdpfxewkha Ts Ag Ieu

Condition: good (used), Year of construction: 1990, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, table length: 1,400 mm, Types:F 45 ,Machine nr:90-8-86 Nodpstxh Niefx Ag Isku

Condition: new, Year of construction: 2025, The WA 8X series convinces above all by its enormous stability. For you, no matter what material you use - whether panel materials or solid wood - the WA 8X masters every challenge with a maximum saw blade projection of 125 mm. Another important feature: the variety of options. You can equip your machine according to your needs! This has the advantage for you that your machine then fits exactly to your workshop and your work processes. Saw blade adjustment Motorised rise/fall and tilt adjustment 0-46° for the main saw blade Digital display of the tilt angle Nodpeglh Iwsfx Ag Ioku Saw blade diameter 400 Saw blade protrusion 90° 0 - 125 mm Saw blade protrusion 45° 0 - 87 mm Scoring unit Control panel at eye level Sliding table table length 3200 mm, incl. infinitely adjustable top carriage locking Rip fence, cutting width 1300 mm CNC rip fence Crosscut fence with fixed 90° angle manual adjustment using graduated scale up to 3200 mm Motor 5,5 kW TABLE HEIGHT 910 mm

Condition: used, Year of construction: 2024, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 154 mm, cutting width (max.): 1,000 mm, saw blade diameter: 450 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, overall weight: 1,200 kg, pivoting range: 45 °, Equipment: motor brake, scorer, with Prodrive control system Scoring unit with LED lighting with CNC rip fence Crosscut fence with digital display Table extension: 840 mm Nkodpfx Asxl Ti Tsg Iou Angle-mitre fence DIGITAL Machine height: 910 mm 2-axis scoring unit with swivel Automatic dimension correction on rip and angle fence when swiveling the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last input dimension (back function) 99 storable cutting programs Further technical data Extraction port: 120 / 80 mm Outrigger table: 1200 mm Speed: 3000 / 4000 / 5000 rpm Sliding table: 3200 mm Height adjustment: electric Angle adjustment: electric Safety device: overhead guard

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, table height: 910 mm, cutting length (max.): 3,105 mm, cutting height with scoring (max.): 150 mm, cutting width at rip fence: 1,300 mm, warranty duration: 12 months, Altendorf F45 Pro Drive The machine is new and configured as follows: Working height: 910 mm Sliding table length: 3200 mm Control panel at eye level for comfortable operation Cutting height: 150 mm with a 450 mm saw blade Main motor: 7.5 kW with three rotation speeds; features the AKE saw blade changing system 2-axis scoring unit with a safety LED light in the scoring area, enhancing operator awareness when the scoring unit is active Main motor and scoring unit ON/OFF buttons on the sliding table for convenient machine startup Mitre crosscut fence, extendable to 3500 mm, with angle correction Cutting width: 1300 mm with CNC, programmable via the screen Nkjdpfxjxaudhj Ag Ieu Gobjxaudhskr A Tq Djkc Motorized rise, fall, and tilt adjustment (0–46°) for the main saw blade, with automatic cutting height correction when the blade is tilted The Altendorf F45 has long been recognized as the flagship of sliding table saws, consistently setting the highest quality standards for this type of machine.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm Nodpfx Aeuh R R Esg Ijku - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Nkjdew Ix Alspfx Ag Iju