Used Aluminium for sale (2,084)

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, FOR SALE — SEMI-AUTOMATIC ANODIZING LINE BY DRABEX PRICE: PLN 1,000,000 Complete semi-automatic aluminium anodizing line for sale. The line is currently switched off and awaiting a buyer. It allows anodizing of aluminium profiles up to 6.20 m in length. Basic information: Tank length: 6.80 m. Tank width: 0.5 m to 1.4 m. Footprint required: 25 m x 10 m. Capacity in 3-shift operation: 2000 m². Line type: semi-automatic anodizing line. Line stations: Nr 1 – Loading and unloading Nr 2 – Hot rinse — 10 m³, gas diaphragm heating, thermally insulated tank Nr 3 – Rinse — 10 m³ Nr 4 – Sealing — 20 m³, tank with bubbler, galvanic filter connected Nr 5 – Rinse — 10 m³ Nr 6 – Rinse — 10 m³ Nr 7 – Rinse or electro-colouring — 20 m³, tank without equipment Nr 8 – Rinse — 10 m³ Iodpfxjzkivge Afvstk Nr 9 – Rinse — 10 m³, tank with bubbler, spray Nr 10 – Rinse — 10 m³ Nr 11 – Degreasing — 20 m³, gas diaphragm heating, tank with bubbler Nr 12 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 13 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 14 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 15 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 16 – Rinse — 10 m³, tank with bubbler Nr 17 – Rinse — 10 m³, spray Nr 18 – Deoxidising — 10 m³, spray Nr 19 – Rinse — 10 m³, spray Nr 20 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 22V / 7000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Nr 21 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 25V / 8000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Interested buyers are welcome to get in touch. Referral reward: PLN 20,000. I will pay PLN 20,000 to whoever introduces the buyer who finalises the purchase, payable after full payment is received and the contract is signed.

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Itodpjy D Rk Iefx Afvjk Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.8 kg/dm³ Volume: 50,000 liters Manufacturer: EVS Available quantity: 2 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Overall height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Itjdpfx Afsww Em Dsvsk Angle of the upper floor: 15° Angle of the cone: 90° Equipment and connections: In the upper floor: 1 x access dome DN 600 with hinged cover 1 x ventilation nozzle 1 x roof edge railing with handrail 2 x crane eyes 1 x flange for filling line 1 x block flange for measuring and control technology On the shell: 1 x access door approx. 870 x 1,960 mm Various pipe supports for the filling pipe 1 x filling pipe DN 80 1 x nozzle for level indicator One of the silos also has a single-flight access ladder with back protection. Otherwise, as shown in the pictures and drawings.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 6,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 90 °, rotational speed (max.): 2,800 rpm, On sale Pertici saw that is no more required. wo headed automatic saw for cutting aluminium profiles. Saw blade diameter: 500 mm Max cutting lenght: 6000mm Min cutting lenght: cca 330 mm Engine power: two three-phase motors, each one 2,2 kW (summary4,4 kW), 2800 rpm Head tilt: 90-45° Year of production : 2016 Ijdoztc Dcepfx Afvjtk Price: 9300€ The machine can be seen in Rugvica, Croatia (nearby Zagreb).

Condition: excellent (used), Year of construction: 2010, operating hours: 18,502 h, functionality: fully functional, machine/vehicle number: 3201379, type of input current: AC, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 40,000 kg, total length: 2,550 mm, total height: 1,090 mm, total width: 1,500 mm, Our Salvagnini P4X-2516 Panel Bender is a fully automatic, high-performance panel bending system designed to streamline sheet metal production with maximum efficiency and precision. It integrates automated loading, feeding, bending, and unloading into a single continuous process, minimizing manual handling and ensuring consistent output quality. The machine features adaptive bending technology with real-time sheet thickness measurement, allowing automatic adjustment of bending parameters for optimal accuracy. Equipped with an advanced SiX control system and intelligent software, it enables flexible production scheduling and program management. The inclusion of an automatic blankholder (ABA) and auxiliary bending tools (CLA) allows complex and multi-stage bending operations without manual setup, while the rotating manipulator enables multi-side bending in a single cycle. Max. sheet length: 3,048 mm Max. sheet width: 1,524 mm Max. bending length: 2,500 mm Sheet thickness (steel ~410 MPa): 2.5 mm (90°) Sheet thickness (stainless steel ~580 MPa): 2.1 mm (90°) Sheet thickness (aluminium ~265 MPa): 3.2 mm (90°) Max. bending angle: +135° / -135° Max. flange height: 165 mm Max. diagonal (rotatable sheet): 2,800 mm Min. sheet thickness: 0.5 mm Max. pack height (incl. pallet): 350 mm Max. load capacity: 5,000 kg Vertical stroke (loading table): 550 mm Rotation capability: 0°, 90°, 180°, 270° Automatic loading system with scissor lift table () Conveyor–destacker (PCD3015) for automatic feeding Automatic panel bending center P4X-2516 Upper bending blade (LS1) Lower bending blade (LI) SiX CNC control system SOLE.P4 production management software Ijdpfx Ajyr Ackefvjtk OFFICE.P4 offline programming software ABA automatic blankholder (automatic length adjustment) CLA-A asymmetric auxiliary bending system UC1000-G13 gooseneck tool set Eroded clamp (for coated / special materials) PSE automatic cleaning & lubrication system SAP panel unloader / accumulator Spare parts kit (approx. €7,000 value)

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 6.860 kg Axle 1: left 8 mm right 8 mm Isdozrk Sljpfx Afvjtk Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Itodpezdi Nmofx Afvek

Condition: used, Year of construction: 1989, saw blade diameter 400 mm capacity 90 degrees: round 120 mm Iedpfx Afoy D A E Dovetk turning speeds 1400 / 2800 U/min engine output 4,0 kW weight of the machine ca. 180 Kg dimensions 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw

Year of construction: 2008, condition: used, functionality: fully functional, 3 x 142 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of manufacture: 2008 Volume: approx. 142,000 liters Type of vessel: Silo Condition: used Suitable for foodstuff: no Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific gravity of medium: 0.63 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Construction Ijdjxqr E Rspfx Afvetk Inner shell material: Aluminium Remarks: Material grade: AlMg3 / AlMgSi3 Support type: support ring/ base frame Top bottom type: conical head Slope: approx. 15 % Bottom type: cone Cone angle: 60 degrees Top section: 1 x roof edge railing, height: 1,200 mm 1 x walkway with handrail 2 x crane lugs 1 x manhole DN 600 with vent 1 x connection flange for level measurement 1 x welded socket for high level sensor 1 x flange DN 100 (filling) Shell/body: 1 x personnel door (approx. 1,800 x 850 mm) 1 x cable protection tube 1 x filling line DN 100 with TW connection Bottom section: The silos terminate below in a 60° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.

Condition: used, saw blade diameter 450 mm capacity 90 degrees: round 130 mm capacity 45 degrees: round 100 mm capacity 90 degrees: flat 210 x 170 mm capacity 45 degrees: square 145 x 170 mm turning speeds 2900 U/min total power requirement 2,3 kW Itedpoyfwxaofx Afvok weight of the machine ca. 600 Kg dimensions 4,0 x 1,5 x 1,5 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic machine - Pneumatic workpiece clamping device - Roller conveyor with material stop, length 3m - Feed roller conveyor, length 3m Machine color is blue!!

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Itedpfex Ehg Tox Afvsk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 500 h, Sublimation machine for wood effect on aluminium profiles. the machine has 11 places for profiles and is totally functionable and ready for use. Itsdpou Td Izsfx Afvjk

Condition: excellent (used), functionality: fully functional, mileage: 142,000 km, first registration: 01/2022, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,750 mm, next inspection (TÜV): 01/2028, fuel: diesel, energy efficiency: D, color: white, number of gears: 6, emission class: euro6, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,120 mm, loading space height: 2,150 mm, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, soot filter, spoiler, start-stop system, traction control, truck registration, IVECO DAILY 35C14 with aluminium box body, year 2022, 142,000 km, EURO 6D, twin rear wheels, air conditioning, electric windows, central locking, car radio with Bluetooth, cruise control with steering wheel controls, 2300 cc engine, 140 HP, 6-speed gearbox, 3 seats, 3.5 t gross vehicle weight. Itsdpfx Afjy E Tx Dsvjk

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. • 10 programs with 30 lines. • 20 parts in memory. Isdpfsvl Eahex Afvetk • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, Aluminum storage silo with a sturdy base Technical data / Dimensions Available quantity: 1 Volume: approx. 80,000 liters Container type: Silo Condition: used Food grade: yes Design: vertical Internal diameter: approx. 3,500 mm External diameter: approx. 3,550 mm Cylindrical height: approx. 9,830 mm Total height: approx. 14,225 mm Weight: approx. 2,500 kg Specific gravity of the medium: 1 ton/m³ Operating pressure: non-pressurized Material / Construction Material of inner shell: Aluminum Note: Material AlMg3 Equipment Base design: base ring/base frame Quantity: 1 Mounting: fixed Bottom type (top): conical bottom Bottom type (bottom): cone Top: 1 x roof edge railing (height: approx. 1,200 mm) 2 x lifting lugs 1 x ventilation hood 1 x access to the filter housing The filter housing contains the following connections: 6 x filter openings 1 x connection for silo pilot (level measurement) 1 x connection for level limit signal Ijdpfx Afszpzulevotk Shell: 1 x access door (approx. 1,800 x 80 mm) 1 x filling line DN 80, ending in a Storz coupling at the bottom 1 x cable protection pipe DN 50 2 x weld-in adapters for level limit signal Various pipe penetrations in the base frame Various brackets for access ladder Bottom: 1 x manhole DN 400 with cover 1 x discharge chute DN 1500 (Reimelt), ending in a cellular rotary valve at the bottom

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. Ijdpfx Asyrhu Sjfvstk • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Year of construction: 2025, condition: used, We are offering this used M.S.K. OMRM 133 OMRM133 automatic double-head PVC alu machine, diameter 550 cm, year of manufacture 2025. Model: OMRM 133 Serial number: 25DCM330004 Production date: 2025 Power: 6.5 kW Voltage: 400 V Frequency: 50 Hz Current: 32 A Air pressure: 6-8 bar Air consumption: 95 l/min Iodpfx Aey Encwjfvjtk Weight: 1220 kg Width: 1985 mm Length: 8110 mm Height: 1895 mm Country of origin: TURKIYE If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/1990, loading space length: 6,650 mm, loading space width: 2,450 mm, loading space height: 1,970 mm, total length: 9,450 mm, total width: 2,500 mm, total height: 3,280 mm, suspension: steel, tire size: 275/70 R22.5, wheelbase: 4,870 mm, color: other, Year of construction: 1990, Superstructure Volume: 32 m3 = More information = Axle configuration Tyre size: 275/70 R22.5 Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Double wheels; Max. axle load: 10000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Rear axle 2: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Rear axle 3: Double wheels; Max. axle load: 9000 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 8.270 kg Carrying capacity: 19.730 kg GVW: 28.000 kg Functional Tipper: Back Maintenance, history and condition APK (MOT): tested until 05/2027 Technical condition: very good Visual appearance: very good Identification Registration number: WD-16-VG = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers Itsdpfxoy I Ampo Afvek We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 6000, laser power: 6,000 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 80 mm, positioning speed: 120 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of cooling: water, overall weight: 15,000 kg, Equipment: cooling unit, documentation/manual, nozzle changer, safety light barrier, BYSTRONIC BYAUTONOM 3015 - 6 KW CO2 LASER CUTTING SYSTEM WITH SHUTTLE TABLE | YEAR 2017 The Bystronic ByAutonom 3015 (year 2017) is a CO2 laser cutting system with 6 kW resonator power for sheets up to 3000 x 1500 mm. It combines a ByLaser resonator with the ByVision control and a shuttle table system. With automatic nozzle and lens-cassette changer, low-manning continuous operation in multi-shift production is possible. CONDITION - Condition: Used. Functional scope as per the technical data below. - Details on the technical condition individually upon serious interest. - Viewing possible by arrangement (no demonstration under power). - Condition/Maintenance Messenger on board: reports machine status and maintenance intervals. FUNCTION & APPLICATION Laser beam cutting (LBC) with flying optics - the cutting head moves over the stationary sheet. It processes structural steel, stainless steel and aluminium. The shuttle-table system allows loading and unloading during ongoing cutting. Cutting programs run via ByVision; the system is prepared for Bystronic automation (ByTrans Extended). Applications: metalworking industry, plant and apparatus engineering, structural steelwork, precision-part manufacturing. TECHNICAL DATA - Bystronic ByAutonom 3015 | Laser type: CO2 | wavelength 10.6 micrometres | flying optics - Laser power: 6,000 W (resonator ByLaser 6000) | Year: 2017 - Nominal sheet format: 3000 x 1500 mm | cutting range X 3048 / Y 1524 / Z 80 mm - Max. workpiece weight: 890 kg - Max. material thickness structural steel: 25 mm - Max. material thickness stainless steel: 25 mm Iedpfxsydq Hns Afvstk - Max. material thickness aluminium: depends on power class and configuration, confirmed during inspection - Positioning speed approx. 120 m/min | axis acceleration 30 m/s2 - Positioning accuracy +/- 0.1 mm | repeatability +/- 0.05 mm - Drive: linear drives Y/Z, high-torque motors X | Machine weight: 15,000 kg - Installation dimensions approx. 12,800 x 6,300 x 2,400 mm (equipment-dependent) - CNC: Bystronic ByVision | touchscreen + manual control unit - Automatic nozzle and lens-cassette/cutting-head changer (standard) | Shuttle-table system - Automation: ByTrans Extended compatible | Condition/Maintenance Messenger | Safety light barrier Serial number, connected load, gas/compressed-air demand and chiller capacity on request. SCOPE OF DELIVERY - 1 x Bystronic ByAutonom 3015 (CO2 laser cutting system) - 1 x CO2 resonator ByLaser 6000 (6,000 W) - 1 x Bystronic ByVision CNC control with touchscreen and manual control unit - 1 x Automatic nozzle changer | 1 x Automatic lens-cassette changer - 1 x Shuttle-table system | 1 x Chiller (water circuit) - 1 x Machine documentation LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) trades in structural-steel and sheet-metal processing machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), functionality: fully functional, Blade inclination -45° / +45°. Maximum vise opening 180 mm Iodpjx Hw Sqjfx Afvjtk Maximum non-feedable length 385 mm Disc size 350 mm Blade rotation speed 1700 / 3400 rpm - 2 speeds

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2012, * Drum brakes * BPW axles * Lift axle * Thermo * Aluminium tipper body Itjdpfx Aswht Abefvok * Sliding/roll tarp * Unladen weight: 5,450 kg -----Internal vehicle number: 10905-----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, device for dosing pastes, jams, meat, cheese, etc. into aluminum and plastic cups, including an aluminum lid sealing machine and a date coder Itjdpfx Afew Dqmvjvjk

Condition: good (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Good Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in very good condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: 3000 x 1500mm Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Isdpewb D S Hofx Afvjtk Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, saw blade diameter 420 mm capacity 90 degrees: round 130 mm capacity 90 degrees: flat 160 x 100 mm capacity 45 degrees: round 110 mm capacity 45 degrees: square 130 x 80 mm turning speeds 3000 U/min engine output 2,0 kW total power requirement 2,0 kW weight of the machine ca. 190 Kg dimensions 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw Ijdpfx Aorub S Usfvotk - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: Itedpfx Afex Eb Anevek - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts