Used Angel Antoni for sale (59)

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit Cjdpjzil Txsfx Ak Asri - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 1999, Engel robot Year of manufacture: 1999 With Plus control cabinet Crjdpfxoxxdhte Ak Aei

Year of construction: 2014, operating hours: 1,100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 14012, В ОТЛИЧНОМ СОСТОЯНИИ МАЛО РАБОТАЛА В КОМПЛЕКТЕ МАШИНА ПЛЮС МЕЛЬНИЦА ПРОИЗВОДИТЕЛЬ CLOMBINI ITALY MODEL ANGEL ПРОИЗВОДИТЕЛЬНОСТЬ 1200КАПСУЛ В ЧАС 380V 50HZ 2.5KVA Crodpfx Aeywd H Nek Aei РАЗМЕР 1900Х1200Х1540 ВЕС 390 КГ ВОЗДУХ 200 ЛИТРОВ В МИНУТУ ДАВЛЕНИЕ 0,6-0,8 ПОЛНЫЙ КОМПЛЕКТ ДОКУМЕНТОВ ИНСТРУКЦИЯ ПО МОНТАЖУ И РАБОТЕ ЕЛЕКТРООБОРУДОВАНИЕ SIMENS

Year of construction: 1988, condition: used, Engel display, year of manufacture approx. 1988 Crjdpfx Aexuu Ucok Aji

Year of construction: 1999, condition: excellent (used), Electronic circuit boards CC100 - Engel Year of manufacture: 1999 Horsepower: 244 PD242 CU 201 CU 211 DO 321 Cjdpfxehgka Aj Ak Asri DI 325 AR 281 SR 161 BC 082 OUTPUT TT 081

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, We offer a used Santoni GLC 36 machine for automatic pantyhose sewing. The machine is in full working order, ready for production, and has been regularly used. It is equipped with an automatic gusset insertion unit, which ensures high productivity and consistent product quality. Credpfx Ao Agl Hhjk Aji This machine is an ideal solution for pantyhose and hosiery manufacturers looking for a reliable production machine at an attractive price.

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility Cededcmdlepfx Ak Aeri 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: ready for operation (used), Year of construction: 2016, operating hours: 28,151 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, controller manufacturer: FANUC, controller model: F31iB with Celos, number of slots in tool magazine: 32, number of axes: 6, This 6-axis DMG MORI NZX 2000/800SY was manufactured in 2016. It features a maximum turning diameter of 320 mm and a swing over bed of 800 mm. The machine is equipped with dual turrets, each with 16 stations, and offers high-speed canned cycle capabilities. If you are looking to get high-quality turning capabilities, consider the DMG MORI NZX 2000/800SY horizontal turning machine we have for sale. Contact us for further details. • Number of turrets: 2 • Number of tool slots: 2 x 16 stations • Main electronic connection: Transformer 95 kVA • Chip conveyor: Yes • 4 x angel live tools will follow • 6 x straight live tool holder will follow • 2 x angel C4 Capto live tool holder will follow • 10 x capto fix tool holders will follow • Possible to buy also robot solution • Well maintained • Only running stainless steel since day one • Chuch high/low pressure both spindles • Spindle 2 tailstock spec • 7 MPa high pressure Knoll system • Coolant gun • Coolant float switch • Chuck top coolant both spindles • Airblow for tool tip both turrets • Airblow for chuck spindle 1 • Oil skimmer • Autodoor • Robot IF • Ethernet IF • Safety fence IF • Barfeeder IF • 10 external M codes Crsdpfxszkrqye Ak Aji • Handwheel • Spindle orientation both spindles • Text engraving function • High Speed canned cycle • Program restart • Island open pockets • 1 mB storage • Additional workpiece coordinate 48 sets • Tool offsets 200 sets • Swing over bed = 800 mm • Swing over cross slide 800 mm • Maximum distance between nose 1130 mm • Max turning diameter 320 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2019062, Used (2019), in very good condition termo printing calender with felt. Width: 2000 mm. Reliable Italian quality. Ideal for sublimation and textile finishing. Clean, properly maintained and fully functional. CHARACTERISTICS OF PRINTING CYLINDER: Diameter : 200 mm (7,87“). Width : 2.000 mm (78,74“). Working width: / 1.800 mm (70,87”) TECHNICAL DATA: Installed power: 14 kw/h Crodpfx Aszuy Rvsk Aoi Average electric consumption: 9 kw/h Compressed air pressure: 3-8 bar Mechanic speed: 0.1 - 1.7 m/min Overall dimensions: width 3.110 mm (122,44“). length 1.250 mm (49,21“) height 1.650 mm (64,96”). Net weight: 950 kg Machine produced according to CE rules TENSION CONTROLS: Tension control for printing material: Entry: brake with manual adjustment and manual textile tensioner Exit: tangential winding on felt Tension control for printing paper: Entry: disk brake with pneumatic adjustment. Exit: winding with pneumatic device Tension control for protection paper: Entry: disk brake with pneumatic adjustment. Exit: tangential winding on felt Single motor NOMEX felt with manual tension adjustment system and automatic felt-centring device Incorporated system of felt protection in case of black out and/or compressed air lack

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Crjdpfx Aksdcmize Aji Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52, Weight: 8,500 kg; Power: 142 kW; Voltage / Frequency: 380 V / 50 Hz; Current: 64 A; Compressed air: 6 bar; CE certification: Yes; Condition: Used, in good working order. Description: For sale: an Italian industrial machine, ANGELI ARE 1.0, year 2019. The machine has a CE certificate and is fully functional. Technical specifications: total weight 8,500 kg, electrical power supply 380V / 50 Hz / 142 kW / 64A, working pressure of compressed air 6 bar. Factory number: 52. The machine is used, well-maintained, and in good technical condition. It is ready for inspection, on-site testing, and immediate loading. If interested, I can send additional photos and videos of the machine in operation. We can assist with loading. Crodpfxoz Eap Rs Ak Aji

Condition: good (used), Year of construction: 2017, Insulated cyclone by GEA, model CYCLONE CHE 394. Year 2017. With 2 reinforcement brackets. Bottom outlet DN100. Top inlet Clamp 1". Side inlets Clamp 1" and 4". No documentation available. Cyclone dimensions: Length: 650 mm Credpfey Hfxrox Ak Aei Width: 560 mm Height: 1510 mm

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Incl. robot (ASS) Production in clean room. Cjdpfx Aket Dxqts Asri

Year of construction: 2017, operating hours: 1,752 h, condition: excellent (used), functionality: fully functional, Calender Monti Antonio 72-3600 + Plotter Mimaki JV5 320s Calender Monti Antonio 72-3600 Calender in very good technical condition, regularly lubricated. Cylinder diameter: 200 mm Material width: 3,200 mm Required pressure: 6-8 bar Speed: 0.1 - 1.7 m/min Max. temperature: 230 °C Maximum power consumption: 19 kWh, average consumption: 13 kWh Operating hours: 1752h Meter reading: 58104m Included with the calender is the graphic printer plotter Mimaki JV5-320s: The machine is in very good technical condition, all nozzles are open, regularly cleaned. Credpfx Aot Rhmksk Aji On 07/07/2023, all print heads and accessories were replaced: - DX5 print head – 4 pcs - Dampers – 32 pcs - Captops – 4 pcs - Pumps – 4 pcs - FPC tapes – 4 pcs - Sponges Approx. 1000 running meters have been printed since then. Total machine output: 13543m

Condition: used, Year of construction: 1998, functionality: fully functional, The used AVM ANGELINI DG13 2-axis CNC lathe is a medium to large-sized, 2-axis numerically controlled lathe with an inclined bed, featuring a center distance of 850mm, an ASA 8” spindle nose, and a maximum bar capacity of 90mm. It was manufactured in 1998 (installed in 2000), complies with “CE” standards, and is equipped with a FANUC 0-T CNC control. It features a 315mm hydraulic chuck, a 26kW spindle motor, a 12-position automatic tool changer turret (with corresponding tool holders), and is complete with a tailstock, a chip conveyor, manuals, and a “CE” certificate. Csdjzu Awfjpfx Ak Aori

Condition: good (used), tank capacity: 910 l, 910-liter stainless steel 316 reactor with jacket made of stainless steel 316L, hermetically insulated, featuring a control panel and agitation system. Control panel description: Endress+Hauser HMI screen “Emergency reset” indicator light Mushroom-type emergency stop button RPM display Product temperature display 3-position agitator selector (1- top agitation, 2- bottom agitation, 3- both simultaneously) Top agitation: off-centered three-blade propeller type located at the upper bottom, manufactured by SPX, model Lightnin SR5S200 with a 0.37 kW motor. Magnetic agitation at the lower bottom with a 0.55 kW motor. Cedpfx Akoy Hfw Us Aori

Year of construction: 2025, condition: reconditioned (used), machine/vehicle number: C5623, Vertical axis basket centrifuge with top discharge, fitted with a bag, mounted on three legs (with tie rods and compression springs), used/second-hand. All parts in contact with the product are made of 316L stainless steel (except for the seals). Credpfjynb Idjx Ak Asi

Condition: excellent (used), functionality: fully functional, axle configuration: 3 axles, suspension: steel, DE ANGELIS 3R3201, manufactured in December 1999, with spring-loaded ramps, and a useful load capacity of 26,400 kg. Crjdpfx Aoz N Hb Njk Asi

Condition: used, functionality: fully functional, spindle bore: 35 mm, well-maintained conventional lathe. Codpfx Akjzzdnls Aori

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 10 cup wheels vertical edging machine + Clean 20 floculant water treatment system Crsdpsymxk Hofx Ak Aji variable angle 0-45° glass thikness : 3 - 55 mm min. glass dimension : 100 x 100 mm max. load : 1800 kg height of work surface : 840 mm total power : 20 Kw tank capacity 340 L forward speed : 0,4 - 5,5 m/min. total weight : 3800 kg

Condition: used, mileage: 22,367 km, power: 90 kW (122.37 HP), first registration: 04/2002, overall weight: 3,500 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro3, loading space width: 1,800 mm, loading space length: 3,250 mm, loading space height: 1,870 mm, Year of construction: 2002, total length: 5,506 mm, total width: 1,998 mm, total height: 2,490 mm, number of seats: 4, Equipment: ABS, all wheel drive, parking heater, Extremely clean and like-new Fiat Ducato 2.8 JTD with Dangel all-wheel drive, differential lock, and low-range gearing. Former reconnaissance vehicle from disaster relief services, with only 22,287 original kilometers. +++ Untouched, original condition with no welding. Features: - 2-seater bench seat, variably mounted on airline rails with large storage compartment – approved for 4 seats - 2 built-in shelving units - Second battery with integrated charger via 220V external power supply - Power inverter - Two sliding windows in the sliding door and opposite, with curtains or roller blind on the sliding door - Small roof hatch - Auxiliary heater - Electric mirrors - ABS, airbag - Rear doors with 270° opening angle - Fog lights - Dangel 4x4 all-wheel drive with differential lock Includes technical conversion to SoKFZ (special vehicle) office vehicle with 4 seats, or as a truck – allowing full tax deductibility for businesses. Special signal devices fully functional, rotating beacon lights with faux leather covers and snap fasteners. Cjdpfxsyltb Ds Ak Asri Unladen weight: 2,694 kg GVW: 4.0 tons (can be downrated to 3.5 tons without technical modifications) Freshly serviced, including brake fluid change. Continental M+S tires, DOT 2019. Headlight adjustment has been converted from hydraulic hose system to electric actuators. Internal dimensions from partition: 3250 x 1750 x 1850 mm (LxWxH) External dimensions: 5505 x 1998 x 2490 mm (LxWxH) +++ Subject to error, change, and prior sale.

Year of construction: 2004, condition: good (used), Disintegrator calibrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, particle unification for bulk solids, and granulation of moist products. Throughput from 50 to 5,000 kg/h. Codpfx Aey Hfxfok Aori

Condition: used, mileage: 20,644 km, power: 90 kW (122.37 HP), first registration: 03/2002, overall weight: 3,500 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro3, loading space width: 1,800 mm, loading space length: 3,250 mm, loading space height: 1,870 mm, Year of construction: 2002, total length: 5,506 mm, total width: 1,998 mm, total height: 2,490 mm, number of seats: 4, Equipment: ABS, all wheel drive, parking heater, Exceptionally clean and as-new Fiat Ducato 2.8 JTD with Dangel all-wheel drive, differential lock, and off-road reduction gear. Former reconnaissance vehicle from civil protection service, with only 20,644 km on the clock +++ original, unwelded condition. Csdpfxexumm Ds Ak Aori Flexible 2-seater bench seat mounted on latching rails with large storage compartment - 4 registered seats, 2 built-in shelving units, second battery with integrated charger via 220V external power supply, inverter, 2 sliding windows (in sliding door and on opposite side) with curtains or roller blind in sliding door, small roof hatch, auxiliary heater, electric mirrors, ABS, airbag, rear doors with 270° opening angle, fog lights, Dangel 4x4 all-wheel drive with differential lock. Including technical modification to special-purpose vehicle (office vehicle) for 4 seats or as a truck - fully eligible for tax deduction for business owners. Blue light and siren functional, rotating beacons with faux leather covers and snap fasteners. Empty weight: 2,694 kg, GVW: 4.0 t, can be down-rated to 3.5 t without technical modifications. Fresh service newly performed including brake fluid change. M+S tires from Semperit with 10.0 mm tread depth all around, from DOT 2018. Interior dimensions (from partition): 3250 x 1750 x 1850 mm (LxWxH) Exterior dimensions: 5505 x 1998 x 2490 mm (LxWxH) +++ Subject to error, changes, and prior sale.

Condition: excellent (used), Angel Victory 1350H500V/220 Combi Closing 220 tons year 2004 Clamping plan WxH 960x830 Scrow 55mm+40 mm 618 cm3+251 Crodpfx Aepa Rhbok Aoi EC100/A03 Minmal mold height 320mm Maximum 730mm

Condition: excellent (used), ANGELUS 120L AUTOMATIC CAN SEALER The ANGELUS 120L automatic can seamer is designed to hermetically seal metal containers using a double seaming process on industrial production and packaging lines for food products. The equipment incorporates a rotary seaming system that allows for continuous operation, synchronizing the feeding of cans and lids with the mechanical seaming operations. ANGELUS technology is widely used in the canning industry due to its robustness, mechanical precision, and ability to produce uniform seals in continuous industrial production processes. MAIN FEATURES - Manufacturer: ANGELUS - Model: 120L - Type: Automatic can seamer - Application: Sealing of metal containers - Rotary seaming system - Automatic and continuous operation - Automatic can feeding - Lid feeding and positioning system - Mechanical sealing by double seaming - First and second seaming pass operations - Synchronized container transfer - Drive system with electric motor - Mechanical seaming assembly with heads and rollers - Adjustment and adaptation to formats according to installed tooling - Robust industrial structure - Safety guards on moving parts - Accessibility for inspection and maintenance - Integrable into complete filling and sealing lines for canned goods OPERATING PROCESS Pre-filled cans are automatically fed into the ANGELUS 120L seamer, where they are positioned for the sealing operation. The system feeds and places the lids onto the containers, which are then conveyed to the rotary seaming mechanism. During the first seaming operation, the edge of the lid and the flange of the can body are mechanically folded to form the initial joint. In the second operation, the rollers compress and complete the formation of the double seam, creating a hermetic mechanical bond between the lid and the container body. Once sealed, the cans are automatically discharged and can continue to washers, inspection systems, autoclaves, pasteurizers, coolers, labelers, and end-of-line equipment. APPLICATIONS Especially suitable for canning industries processing fish, seafood, meat, vegetables, legumes, and prepared dishes, as well as other manufacturers of canned foods. It can be integrated with: - Automatic fillers and dosing machines - Lid feeding systems Cedpfxjz R S Hbe Ak Ajri - Liquid topping dosing equipment - Vacuum systems, depending on line configuration - Can washers - Sterilization autoclaves - Seam inspection systems - Labeling and case packing lines The ANGELUS 120L provides an industrial solution for automating can sealing, offering a continuous and repetitive mechanical process. The compatible formats, production speed, and exact sealing characteristics will depend on the installed tooling and configuration. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.