DMG MORI NZX 2000/800SY

DMG MORI NZX 2000/800SY

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Gbodpfxsx Ih Dmo Aiyep

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Godpfx Aiju R R Acjyobp Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Circle blade size: 6830 x 41 x 1,3mm Power: 7.5kW Length: 4600mm Width: 2150mm Height: 2310mm Weight: 4300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments Gbjdpfxex Enlls Aiyjp • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function • Compliance: CE marking Additional equipment • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 350MB 1250U Max. swing diameter: 830 mm Max. turning diameter: 420 mm Max. turning length: 1,250 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Machine is equipped with: - CNC control Mazatrol SmoothG - SMW three-jaw chuck KNCS 400, diameter 400 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor Gbodpey Igz Dsfx Aiyop - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Year of construction: 2014, condition: excellent (used), DMG PH 150-8 . year of construction 2014 . with pallets . Gbjdpfoin Dklsx Aiysp Touch screen . plant in very good condition .

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm Godovwgl Nopfx Aiyjbp TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, type of input current: AC, Machinge is in perfect working shape. It is very quick machine, pick-up was remanufactured. Selling due to retirement in the future. Gbodpfjnyiyaox Aiyjp The remaining machines, complete equipment will also be for sale in the future. Three cnc machines, two forklifts, etc... Not all items are in the pictures because there is a limit of 15 photos. Contact for photos.

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle Gbsdpfx Aoy Txrxjiyop - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, overall weight: 2,947 kg, number of axes: 3, This 3-axis Mitutoyo Crysta-Apex S9166 was manufactured in 2018. It features a comprehensive measuring range with X-axis at 900 mm, Y-axis at 1600 mm, and Z-axis at 600 mm. Equipped with CNC control and MCOSMOS-3 CNC V4 software, it includes a Renishaw PH10MQP R2 indexing probe head and SP25M scanning probe system. Additional equipment includes eco-fix CMM fixturing systems and a high-capacity CEE power cable. Consider the opportunity to buy this Mitutoyo Crysta-Apex S9166 CMM machine. Contact us for more information. • Control & software: CNC control; MCOSMOS-3 CNC V4 • Probe system: Renishaw PH10MQP R2 indexing probe head; SP25M scanning probe system; multiple stylus holders (SH25-2); starter probe kit (M3); ceramic calibration sphere Ø20 mm (with factory certificate) • Option: Gear measurement option purchased in 2021 • Condition/usage: Machine was in the quality control room for final inspection • Mounting plates: All aluminum mounting plates installed on the measuring machine Additional equipment • Workstation (PC, keyboard, mouse) • 2× HP 23" monitors (1920 × 1080) • USB dongle / Wibu-Box license • eco-fix CMM fixturing system (kits S and L) • Quick-rail base kit • J/S Box-M Type A • High-capacity CEE power cable • Various buttons, 5-10 pieces (6 adapter plates)Height-adjustable desk1 tool trolley with contents3x large aluminium plates 800x40030 small aluminium plates with various fixtures. 250x250Centre clamp vice / 3-jaw chuck, etc. Gjdpjydm Hkefx Aiyobp

Condition: excellent (used), Year of construction: 2012, operating hours: 14,901 h, functionality: fully functional, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A CNC turning/milling center DMG CTX beta 1250 TC 4A, manufactured in 2012. The machine is equipped with a Siemens 840D / ShopTurn 3G control system and features a main and counter spindle, B-axis, Y-axis, upper milling spindle, and a lower turret. Current operating hours are approximately 14,901 hours, and current spindle hours are approximately 5,000 hours. The machine is still connected to the utilities and can be inspected by appointment. Condition: Exceptionally Good / Superbly Maintained Technical Specifications Process: Turning / Milling / Complete Machining Machine Type: CTX beta 1250 TC 4A Year of Manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control System: Siemens 840D / ShopTurn 3G Main Spindle / Counter Spindle: 1 x FNC 250 each, up to 5,000 rpm Main Spindle: Hainbuch SpannTop nova Modular 80 HS Internal Clamping Device: Diameter 77 mm GS Partial Internal Clamping Device: Diameter 67 mm x 700 mm Coolant System Pressure: 8 / 20 / 40 / 80 bar Short Bar Loader Magazine: IRCO ILS-RBK 100/16 Upper Milling Spindle: HSK-63A, 24-position disc magazine Travel Ranges Upper Unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower Turret: VDI 40, 12 tool positions, X-axis 195 mm, Z-axis 1,200 mm Gsdpfszbg Txjx Aiyobp Additional: Turret collet chuck SMW SLU-X-2-ZS 8-101 mm Footprint: approx. 9,200 x 2,600 mm including exhaust filter system, chip conveyor, and bar storage Video recordings + extensive photo collection available upon request via WhatsApp.