Used Are Bolts for sale (2,538)

Condition: good (used), Carer Z100 HK electric forklift Year of production 2015. The stroller is practically new, mileage approximately 500 hours. Perfect condition, ready to work. Very precise, ideal for machine assembly. White, non-marking tires on the rear axle. Superelastic Trelleborg on the front. Power supply 96V, charger included. Load capacity 10,000 kg at 600 mm. Lifting height 2900mm 1200mm long forks + original extensions. The weight of the stroller is 14,500 kg Triplex free lift mast Fork positioner + side shifter. Cabin Duedpfx Ajwzanqjfnon Reversing camera. Seat with double armrest and Grammer seat belt Front and rear window wipers LED lighting + two Blue Spot safety lamps, flash and sound signal. We provide loading onto any truck or container.

Condition: good (used), Dough Divider and Rounder Record Automat Roll Press for dividing and rounding Dough input from 750 to 2550 grams 30 pieces / 25 to 85 grams per piece with 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 690 x 580 x 1650 mm (W x D x H) Used machine Delivery service Many more roll presses in stock! Dedpsrhfp Uefx Afnoun

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. Dsdpfxeiniz Ds Afnjun * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Condition: good (used), Year of construction: 2016, Marel SensorX 501 Bone Detection Advanced sensing technology and software give the SensorX bone detection capabilities that are unprecedented among automatic bone detection systems. The SensorX is more reliable and consistent in a production environment than any manual inspection. It detects bone fragments with great accuracy, which ultimately improves both food safety and product quality. The SensorX bone detection system automatically finds bonesand other foreign objects in poultry meat using advancedX-ray technology. It detects bones and displays their locationon a monitor. This efficient, accurate and high performingdetection system enables poultry processors to transform the quality standard of their products, giving them a competitive advantage in the industry. Superior bone detection The combination of Marel’s advanced sensing technology, software development and expertise in designing integrated turnkey systems, has created an optimal bone detection solution that fits any deboning process. The SensorX handles all deboned poultry products. The SensorX system has been installed for quality poultry processors, including the biggest brands in the industry, in more than 35 countries around the world. Easily integrated with all major systems The SensorX can be integrated with all major poultry deboning systems. It has proven itself to deliver superior bone detection, give a better process overview, minimize product handling and reduce over-trimming. Ultimately, this gives processors a safer, more valuable product. Innova provides valuable information The Innova Food Processing Software ensures reliable data collection and enables full traceability throughout the production process. Real-time monitoring Innova provides real-time monitoring of key performance indicators (KPIs) such as yield, throughput, quality, capacity and labor efficiency. These valuable insights enable processors to identify opportunities for improvements, while ensuring that production conforms to quality and food safety standards. Manufacturer:Marel Model:SensorX 501 Year:2016 Dedpfx Afsx I D U Ionsun Power:1,8kW / 50-60Hz / 3x400V Belt Speed:0,46m/s Scan Width:500 mm Machine Dimensions LxWxH:3.363x992x2.006 mm Machine Weight:840 kg.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, DEVICE TYPE Digitest hardness tester for rubber and plastics with Rotofix 5-point measurement on a single sample. Automatic Shore A, Shore D, Micro IRHD, Micro Shore A, IRHD N. Stand Test stand BS 09 with dust cover Arm Mounting arm digi test II with loading unit E-Box Electronic unit digi test II - USB / RS232 interface - mini USB cable - 100-240 V, 50/60 Hz Cables Black power cable 10/16A, 250V 90°, 2.0 m Power plug, cold device plug Duedpfxsxw R Svo Afnjn black 3x0.75 Schuko plug 90° to straight cold device socket Precision for the smallest details An IRHD hardness tester is the perfect solution when it comes to precisely testing the hardness of the smallest samples or thin layers. These specialized devices are indispensable for industries such as materials science, electronics, medical technology, or research and development, where even the finest details play a crucial role. With an IRHD hardness tester, you can measure the hardness of materials at a microscopic level. Typical applications include analyzing surface treatments, coatings, or testing microstructures in ceramics and plastics. Modern IRHD hardness testers combine top-level precision with user-friendly operation. Many models feature digital controls that allow for exact positioning of the test points and direct analysis of the results. This technology ensures reproducible results, even with repeated measurements. An IRHD hardness tester is not only precise but also versatile. Whether in quality control, research, or the development of new materials, these devices enable you to conduct your testing at the highest level. You save time and can rely on the results.

Condition: used, functionality: unexamined, Ferwood Code: RU0008252 - Manufacturer Code: FWC-DSM2.1-SSE-02V14 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dujdpfxev Hgf Uj Afnjn

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Dodpfx Aex I D Tkofnjun Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Machine is in very good condition.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: CD1500, CD-1500 VEGETABLE FRUIT DICING MACHINE Dujdpfx Afovlwlconjn This cutter is designed for slicing, dicing, and cutting fruits and vegetables like potatoes, carrots, and beets into strips, slices, or cubes. Interchangeable cutting tools allow you to select the shape and size of the cut pieces, ensuring uniform results. Additional tool sets are available for smaller or larger cuts if needed. Vegetables and fruits are fed manually into the hopper, and the cut pieces are discharged into a receiving bin.

Year of construction: 2018, condition: new, Potatoe / root peeling machines Productivity 1’500-2200 kg/h vegetable are peeled, washed, polished with rotating drum and brushes Automatic product discharge Simple and effective peeling, washing, polishing Dsdpfxedv Ednj Afneun Can be attached to the transporter including in production line. 400V/3phase or can make 220V/3phase USA standard

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: Q0EC156, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: Fanuc 0i MD, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 450 mm Travel Y: 300 mm Travel Z: 300 mm Tool changer: 12-position Spindle taper: BT30 Spindle speed: 10,000 rpm MACHINE DETAILS Dsdpfx Afox Agtyenjun Controller: Fanuc 0i MD EQUIPMENT Various tool holders Operating manual

Year of construction: 2015, condition: good (used), GE Healthcare Xuri Cell Expansion System W5 with Perfusion Module and CO2 Mixer Dujdpfxen I Uqro Afnjn Good working condition. Please check out our other listings as well.

Condition: used, maximum load weight: 2,581 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 01/2024, loading space length: 4,800 mm, loading space width: 2,060 mm, KOMW25346846, Internal/loading dimensions: 480 x 206 cm Payload: approx. 2581 kg Gross vehicle weight: up to 3500 kg Unladen weight: approx. 919 kg 3 braked axles Robust, fully galvanized chassis with V-drawbar Overrun brake and parking brake Steel frame and support rails made from perforated plate, fully welded and hot-dip galvanized Transport surface: support rails made from LOHR perforated plate + aluminium tread plate in the center + additional reinforcement with plywood underneath the loading area Corrosion protection: hot-dip galvanized construction Manual cable winch Hydraulic hand pump tilting device Single-sided hydraulic cylinder for lifting and lowering Perforations in the support rails for load securing Side-folding rear lights for easy trailer loading Jockey wheel... and much more. Subject to errors and prior sale. Dujdpexw Dy Hsfx Afnsn

Year of construction: 2008, condition: good (used), Marel AEW delford weigh price labeler Model: 8160 Duedpfxjg Hwnks Afnen Serial: 82012 2008, Stainless weigh price labeller, min weight 1.5kg - max weight 20kg, scale interval 1/2g, Max tare weight -1Kg, overall length 2750mm, belt width 200mm, weigh platform 200mm x 240mm, with spares and manuals, 1Ph

Condition: excellent (used), Year of construction: 2018, Upgraded Stork / Marel AMF Filleting Line – AMF-i Version We are pleased to offer for sale an upgraded Stork/Marel AMF filleting line, rebuilt from AMF PLC to AMF-i version. The line is in very good technical condition, equipped with its original electric cabinet, and ready to operate in a modern poultry processing plant. The line consists of the following modules: -Filleting line with measuring equipment (encoder) -Loading Module -Deskinner Module -WB without rebuild (no size selection) -Halving with auto adjust -Separating Module Dsdpfsx Hymdjx Afnsun -Breast Tendon Harvesting Max speed: 60 fillets/min Year of production: 2018 Condition: Very good

Condition: excellent (used), Year of construction: 2010, Townsend MasterFormer Type: TA1521 Serial number: 10080439 Year of construction: 2010 Stork MasterFill Type: MTFII Serial number: 0441010 Year of construction: 2010 Stork Master Slice Dedpfx Afjnh Nu Aonsun Type: DRST Serial number: 0420410 Year of construction: 2010 Caliber: 50 mm Karl Schnell vacuumfiller Type: P10SE, 596P Serial number: 22045 Year of construction: 2010 Power: 3 x 400V, 50Hz, 10.9kW Weight: 1180 kg Risco vacuumfiller Type: RS303 Serial number: T310021 Year of construction: 2010 Power: 3 x 400V, 50Hz, 7.7kW Weight: 830 kg With RS70 grinding head

Condition: good (used), machine/vehicle number: 3342, Year of construction: 2021, Carer COMPLETE FRONT-END from Uniktruck Dujdpfx Aeul D Rhjfnsn

Condition: excellent (used), Year of construction: 2020, Type: Active BatterApplicator 600 Serial number: 10446006 Year of ocnstruction: 2020 Belt width: 630 mm Power: 3 x 400V, 50Hz, 6kW Dimensions: 2175 x 1350 x 1550 mm Weight: 550 kg Type: RevoCrumb 600 Serial number: 10446010 Year of construction: 2020 Belt width: 630 mm Power: 3 x 400V, 50Hz, 4kW Dimensions: 2850 x 1700 x 2050 mm Weight: 825 kg Type: Active Mixer 200 Dodsxqmcdspfx Afneun Serial number: 10446009 Year of construction: 2020 Mixer: 200 litres Water: 2 - 5 Bar Power: 3 x 400V, 50Hz, 7kW Dimensions: 1250 x 950 x 1800 mm Weight: 400 kg Semi-automatic tempura- and battermixer with programmable recipe management

Condition: excellent (used), functionality: unexamined, For Sale: Warehouse Racking Components We have the following racking parts available for sale: 51 frames (uprights) – 4,500 mm 42 beams – 3,600 mm 45 beams – 2,700 mm Condition: Uprights are in very good condition, most of them galvanized. Beams show slight surface rust in some areas, the coating is faded due to sun exposure, and some beams may have drilled holes. Location: Autoliv Poland Sp. z o.o., 55-220 Jelcz-Laskowice, ul. Belgijska 2 Photos and detailed information are available upon request. You are welcome to visit and inspect the components on-site. Duodpfxjx Hgifo Afnen Agreed price should include logistics cost on customer side.

Condition: excellent (used), functionality: fully functional, drilling capacity: 40 mm, spindle speed (max.): 1,655 rpm, spindle mount: MK 4, overall weight: 2,500 kg, type of input current: three-phase, Radial Drilling Machine OOYA RE 1000 Radial Drilling Machine for Sale in Excellent Condition Manufacturer: OOYA Machinery Works Co. Ltd "JAPAN" Type: RE-1000A Speed ​​range 50% 12 Segments 32-1655 r/min (50 Hz) Projection 1000 mm Spindle holder MK 4 Drilling capacity in steel (diameter): 35 mm Djdpewvufgofx Afnoun Drilling capacity in cast iron (diameter): 40 mm Arm vertical travel distance: 650mm Spindle diameter: 60 mm Column diameter: 320 mm Clamp base plate: 1020x650mm Clamping block: 450 x 650 x 500 mm ca Spindle diameter: 60 mm Column diameter: 320 mm Power: 3 x 200v 50Hz (Japanese voltage standard) Main motor: 2.2 kW Arm lift motor: 1kw Coolant pump motor: 50 watts Weight: 2.5 t Space requirement approx. 2.1 x 1.16 x 3 m If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 5,5 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560 / 400 / 300 [mm] - Distance table / spindle nose (min./max.) : 180 - 480 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 14 TABLE - Table dimensions : 650 x 410 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 15 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1.590 x 2.640 [mm] - Machine height : 2.500 [mm] - Machine weight : 2.600 [kg] MACHINE HOURS - Number of hours under power : 56.460 [h] - Number of working hours : 13.075 [h] EQUIPMENT - CNC : Fanuc Oi-MD Djdpjuhbt Dofx Afnoun - 3 colors status lamp - Type of divisor : 4e-5e axe intégré (4+1) * manufacturer : NIKKEN * indexing precision 4th axis : 0,001 [°] * indexing precision 5th axis : 0,001 [°] - Coolant tank * with high-pressure pump * with paper filtering unit - Electric transformer

Condition: good (used), Year of construction: 2010, 1 x Marel Carnitech IPS3000 MK2 Slicer Duodpfx Afsxxzgaonsn Year: 2010 Located in London, UK

Condition: used, Marel M Series 3000 Dedpfextfvhjx Afnjun

Condition: like new (used), Year of construction: 2010, Metal clad medium voltage switchgear filled with SF6 gas, extentional modul - 2 x outgoing feeders ( disconnector with earting switch ), producer AREVA France, type FBX-E/25-20/V-C 24kV 630A 20kA, year 2010, switchgear never used, fully functional, originaly packed, all documentation and rutine test protocols available. Dedpfxov Ery Ue Afnoun

Condition: like new (used), Year of construction: 2011, Marel / Scanvaegt Scan Combinator 5414-2L-AD Multihead Weigher With hygiene a major factor in the food industry, Scanvaegt's Scan Combinator 5400 multihead weigher has been developed with this in mind. This machine has hygienic features such as watertight closed leg construction, so that water and dirt can't hide in crevices inside the machine, and it has no plane surfaces to stop dirt from adhering. The weigher can be incorporated at the heart of packaging line, as it can handle infeed, weighing and packing into almost any kind of packaging, or as stand-alone multihead weigher, for use with wet, individually quick frozen and dry products. Dsdpfxjv Ix Ahe Afnoun This line is complete with Marel/Scanvaegt Scan Combinator 5414-2L-AD Multihead Weigher, feed vibrator and platform. Manufacturer: Marel / Scanvaegt Model: Scan Combinator 5414-2L-AD Year: 2011 (never used) Number of weighing heads: 14 Capacity: Up to 120 portion per minute (depending on product) Machine Dimensions LxWxH: 850 kg. Machine Weight: 1.650x1.200x3.109 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 265854, total width: 380 mm, total length: 400 mm, total height: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! MACHINE DETAILS Duedpfxjxqmzgs Afnen Dimensions & Weight Dimensions (L x W x H): 400 x 380 x 400 mm Weight: 20 kg