Used Bolt for sale (1,834)

Condition: used, functionality: fully functional, This machine is capable of producing bent bolts with threads on one end (eye bolt) or both ends (u bolt) Iijdpfx Anszt S U Rjgsg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Iiedpfx Ansz Diq Uogeg Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Iedpfeztrpnex Angoig

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Isdpfx Aey Ihbxengjig Price per unit. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 2331 280, We sell a used Bolte Pro I-2200 stud welding unit with microprocessor control. MFG 2023, serial number: 2331 280 The trolley version of the PRO-I 2200, with two large, extremely robust wheels and a telescopic handle, is ideal for mobile use on construction sites. Technical features and advantages: Excellent welding quality – modern inverter technology ensures very precise control and high reproducibility of the welding process Very high arc stability – also in cases of short welding times and low welding currents Powerful – high welding current of 1050 A for a maximum welding diameter of 13 mm Fast welding sequences through innovative cooling concept Ideal for mobile use – considerably less weight than conventional stud welding units Robust construction for use in harsh environments Low energy consumption due to high efficiency Easy operation via a very robust rotary pressure switch Microprocessor control All functions and parameters are displayed on a large display (display contrast is adjustable) Welding program library Welding program storage – 59 Welding range: Ø 2-22 mm Welding current: 100-2100 A Welding method: studs with ceramic rings or shielding gas and short-cycle stud welding with or without shielding gas Welded materials: steel, stainless steel, aluminum Voltage: 320-495 V, 32 A, 50/60 Hz Power source: transformer/rectifier Welding time: 1-1500 ms, continuously adjustable Protection class: IP23 Dimensions (W x H x L) (mm): 550x850x650 mm Weight: 81 kg drawn arc stud welding gun GD 22 WMS is designed for welding shear connectors with large diameters (19 and 22 mm). Welding range Ø 3-22 mm Welding material steel, stainless steel Stud length 10-525 mm Welding method (acc. to DIN EN ISO 14555) stud welding with ceramic ferrule, stud welding with shielding gas Lift 0-6 mm, adjustable (raster: 0,3 mm) Welding cable: 2 m, 95 mm², outside Control cable plug: 12-pin Dimensions (WxHxL): 68x180x295 mm Weight (without cable): 2,45 kg The new drawn arc stud welding gun GD 22 is designed for welding shear connectors with large diameters (19 and 22 mm). The ample-dimensioned adjustable lift (adjustment range: 0-6 mm) ensures in combination with the adjustable hydraulic piston damper optimum welding results in this diameter field. Of course, the new guns are suitable for welding through metal deck. The gun also features a piston with linear ball track, an automatic length compensation system for different stud lengths and surface conditions as well as a robust, impact resistant housing for the hard work on the construction site. The high-grade outside welding cable (cable cross section 95 mm²) accommodates the high welding currents that are necessary for large stud diameters. Optionally, the new guns can be equipped with integrated travel measuring system. Using this the lift adjustment couldn`t be easier. Moreover, it enables a quality monitoring by measuring and recording of stud protrusion before the weld as well as stud travel (lift, immersion depth, immersion speed and short-circuit time) during the weld. Iodpfey Tqwyjx Angeig Price 8.600 Euro + VAT, negotiable, FCA Oradea, Romania Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, machine/vehicle number: 20023-1, Bolt Former Chun Zu 4 Dies Model: CBF-64S Forging load: 40 tons Max cut-off diameter: 8 mm Max cut-off lenght: 95 mm Max lenght under head (KO): 80 mm Max. Output: 240 parts/min Isdpfxjzg Nmqo Angsig Year: 2001

Condition: used, empty load weight: 6,494 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 09/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 99 m³, suspension: air, tire size: 435/50 R19,5, color: silver, Year of construction: 2019, mileage: 451,887 km, Equipment: ABS, Unladen weight: 6,494 kg, permissible total weight: 36,000 kg, load securing with certificate, cargo area (L W H): 13,620 mm x 2,480 mm x 2,950 mm. Tire size: 435/50 R19.5, certificate DIN EN 12642 (Code XL), cargo space volume: 99 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, electronic braking system (EBS), bolted chassis, swing doors, sliding roof, 1x15 and 2x7-pin connection plugs, antispray, lifting roof (hydraulic), telematics system. You can find our complete vehicle offer at . Interested in financing? With our Value Added Service, we offer you individual financing options, full service and telematics solutions. We are happy to advise you. Isdoz Dmttjpfx Angsig

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. Iijdpsz Azx Rsfx Angsg 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.

Condition: used, mileage: 27,000 km, power: 215 kW (292.32 HP), first registration: 07/2025, fuel type: hybrid, color: black, gearing type: automatic, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Comfort Package, lumbar support for front left and right seats, electrically adjustable, ambient lighting, inductive charging tray for smartphone (wireless charging), luggage compartment package, light alloy wheels front/rear: 7.5x18 / 8.5x18 (V-spoke 780, bicolor), metallic paint, seat cover / upholstery: perforated Sensatec, sun protection glazing (darkened at the rear), sports seats front Iodpfx Ajzt D Hxongeig Additional equipment: Storage package, airbag on passenger side can be deactivated, airbag driver/passenger side, acoustic pedestrian protection (exterior sound), equipment package: Connected Professional, service system: Remote Services, exterior equipment: Shadow-Line high-gloss, exterior mirrors electrically adjustable and heated, exterior mirrors in vehicle color, turn signal integrated into exterior mirror, BMW Live Cockpit Plus, service system: Intelligent emergency call including TeleServices, service system: BMW Intelligent Personal Assistant, BMW Curved Display, on-board computer, DAB tuner (digital radio reception), roof rails high-gloss Shadow-Line, anti-theft wheel bolts, through-loading system (rear center armrest), dynamic brake light, dynamic traction control (DTC), first aid kit, driving assistance system: driving experience switch, remote unlocking of tailgate, floor mats velour, footwell lighting front, luggage compartment separation (net), luggage compartment lighting, speed limiter (speed limit device), rear lights LED, hybrid 215 kW (engine 2.0 L - 135 kW), interior equipment: interior trim Quartz Silver matte, body: 5-door, automatic climate control 3-zone with automatic recirculation control, head airbag system rear, head airbag system front, rear headrests folding, charging cable with Schuko plug, steering wheel (sports/leather) with multifunction buttons, light alloy wheels, model refinement (2), gasoline particulate filter (OPF), park distance control (PDC) front and rear, parking assistant package, driving assistance system: parking assistant, driving assistance system: parking aid side, driving assistance system: reversing assistant, driving assistance system: reversing assistant with emergency braking function (Active PDC), parking brake electrical, personalization system (Personal eSIM), low emission according to emission standard Euro 6e, turn signal lights LED, side airbag rear, side airbag front, service system: eDrive Services, seat heating front, mirror package, exterior mirrors electrically foldable, exterior mirrors with automatic curb function, right, interior mirror with automatic anti-dazzle function, start/stop system (function), warning triangle, widescreen display, heat protection glazing tinted, windshield (version: climate comfort).

Condition: used, 150-Ton Lot of Industrial Fasteners Manufacturers: CHIEF / PGB FASTENER / FABORY Type: Industrial Fasteners (multi-reference lot) Industrial Applications Used in steel construction, industrial maintenance, machine assembly, and large-scale mechanical installations. Iiedpfxexdautj Angsg Main Technical Specifications: - Quantity: 150 tons - Composition: Bolts, screws, nuts, washers – various sizes and standards - Packaging: Pallet / metal crate - Multi-brand references: CHIEF, PGB FASTENER, FABORY 🧩 Machine Usage This bulk lot of industrial fasteners is intended for professionals seeking large-scale fastening solutions for maintenance, construction, or resale. Perfect for production workshops, maintenance companies, or industrial hardware resellers. ⚙️ Features / Differentiators Exceptional lot of 150 tons including a wide range of standardized industrial fasteners. Sourced from three reputable brands ensuring standard compatibility (ISO, DIN, etc.). Ideal for cost-effective bulk supply management. 📷 Detailed listing and photos available on request.

Condition: used, mileage: 213,000 km, power: 353 kW (479.95 HP), first registration: 04/2016, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, MAN TGS 41.480/8x4/Reinforced version/41-tonner/Roll-off system HIAB MULTILIFT XR 26 Z/Wide tires at the front/Rotating beacons/1 owner/Trailer hitch/etc. Axle load front axle 9.5 t, antenna for car phone, audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, exterior mirrors and wide-angle mirrors, electrically adjustable and heated, battery 175 Ah, curb mirror on the right, electrically adjustable and heated, bridge mounting angle bolted, cab: with 2 rear windows, tinted, cab: with exterior grab handle, transmission 12-speed - type: ZF 12 AS, Tipmatic, rocker arm - brake regulated by EVBec, automatic climate control, heated air dryer, auxiliary drive NH/4C without flange, rotating beacon (2), exterior sun visor, stabilizer on both rear axles for roll-off tipper, stone guard in front of the radiator, additional equipment - steps for construction vehicles, additional long-range/fog lights with cornering lights. Axle configuration: 8x4, axle load rear axle 13.0 t, approach/front mirrors, trailer socket 24V / 7-pole, trailer socket ABS, on-board computer MAN-Tronic, differential lock rear axle, electronic braking system MAN-Brakematic, EURO 6 engine, cab: M (medium length), driver's seat comfort, air-suspended, suspension: leaf spring / leaf spring, electric windows, windshield tinted, generator 28 V 80 A, lifting roof mechanically operated, body/superstructure: tipper, rocker arm - brake EVB, fuel filter heated, air intake raised, air compressor 1-cylinder. 360 ccm, engine 12.4 L - 353 kW diesel, spare wheel jack on the side, disc brake front axle, side windows at the rear tinted, sun visor for windshield, spray mist reduction, stabilizer front axle, bumper in steel design 3-part, TGS, drum brake rear axle, door windows tinted, underrun protection at the rear, viscous fan, central locking, permissible total weight 41.00 t. Iedpez Dlw Djfx Angeig

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, _ENGEL DUO 1800H/1800M/900 WP 2FCLS – Full Technical Parameters_ Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Iiodpfoz Az Iaox Angeg Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Hot runner zones: 16 Sequential control zones: 48

Condition: used, Reading type . 0 weight - pallet system . kg length . mm 1 Posten Bügelmessschrauben 400-500 mm 700-800 mm 800-900 mm 900-1000 mm The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Isdpsyycxvjfx Angeig If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.

Condition: good (used), functionality: fully functional, power: 88 kW (119.65 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 140 l, color: yellow, overall weight: 8,400 kg, operation weight: 8,400 kg, maximum load weight: 3,500 kg, lifting height: 3,470 mm, tire size: 15.5-25, tire condition: 75 %, axle configuration: 4x4, number of seats: 1, shovel volume: 1.5 m³, digging bucket width: 2,300 mm, Year of construction: 2012, operating hours: 3,280 h, Equipment: all wheel drive, cabin, differential lock, hydraulics, standard shovel, == KEY SPECIFICATIONS == Year: 2012 Hours: 3,280.6 h Operating weight: 8,400 kg Bucket capacity: 1.5 m³ Bucket width: 2,300 mm Tipping load: 5,400 kg Drive: Hydrostatic Four-wheel drive: Yes Engine: Deutz TCD 2012 L4 Engine power: 88 kW Maximum speed: 20 km/h Tyres: 15.5-25 CE certification: Yes == EQUIPMENT & FEATURES == Four-wheel steering Four-wheel drive 100% differential lock Hydrostatic transmission Z-kinematics Hydraulic multidisc service brake 140 l/min working hydraulics 270 bar hydraulic pressure == INCLUDED ATTACHMENTS == Standard loading bucket Bucket capacity: 1.5 m³ Bucket width: 2,300 mm Bolt-on cutting edge Iisdpfszz H E Hox Angsg == CONDITION == Used condition with visible signs of normal commercial use. The machine shows scratches, paint wear and surface corrosion, as shown in the photographs. The loading bucket shows visible wear, paint loss and surface corrosion consistent with normal use. Inspection and operational testing are possible by appointment. == DESCRIPTION == Kramer 880 wheel loader from 2012 with 3,280.6 operating hours, powered by an 88 kW Deutz TCD 2012 L4 diesel engine. The machine features hydrostatic four-wheel drive, four-wheel steering, 100% differential lock and Z-kinematics. It is supplied with a standard 1.5 m³ loading bucket with a width of 2,300 mm and is suitable for loading, handling and general construction applications. == PRICE, LOCATION & DELIVERY == Price: €23,950 Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: good (used), Year of construction: 2016, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, total width: 600 mm, total height: 150 mm, total length: 1,870 mm, conveying length: 1,870 mm, construction width: 600 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 60 kg, empty load weight: 60 kg, Manufacturer: Heber Year of manufacture: 2016 Overall dimensions (L x W x H) in mm: 1,870 x 600 x 150 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor length in mm: 1,870 Conveyor width in mm: 500 Conveyor height in mm: 150 Roller pitch in mm: 80 Support roller axle type: Steel – bolted Support roller diameter: 50 mm Support rollers per axle: 1 Support roller material: Steel Motor type: Motorised roller Motor manufacturer: Interroll Motor specifications: 24 V / EC310 / 0.05 – 0.98 Conveyor speed in m/s: 0.6 Net weight in kg: 60 Condition: second-hand / fully functional Functional test: OK Iedsz Diknepfx Angsig

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft pre-shredder / Rotary shear – Metal shredder – 264 kW – 1,930 hours Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: __2021__ Hours: 1,930 h Condition: Used Technical specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Blades: Bolted (knives / cutters) Iiedpfx Aex I Dc Esngeg Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation Weight: approx. 27,500 kg Applications / materials Light scrap metal Steel sheets Drums / cans Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Machine is functional Blades need to be replaced Maintenance records available Inspection and testing possible on site Terms of sale & price 🔧 Sold as is (work required) – Thread repair and blade holder surfacing, complete blade set replacement Availability: Immediate Price: €250,000 (excluding VAT)

Year of construction: 2022, condition: used, Main Dimensions and Capacity Chuck size 165 mm (6.5") Max swing diameter 419 mm (16.5") Max cutting diameter, BOT/VB turret 305 mm (12.0") Max cutting diameter, BMT65 turret 173 mm (6.8") Max cutting length 406 mm (16.0") Bar capacity 44 mm (1.75") Travel and Feed Rates X axis 200 mm · rapid 12.0 m/min Y axis ± 51 mm · rapid 12.0 m/min Z axis 406 mm · rapid 30.5 m/min Spindle and Sub-Spindle Main Spindle Spindle nose A2-5 Power 11.2 kW (15 hp) Max speed 6,000 rpm Max torque 102 Nm @ 1,300 rpm Drive Belt drive Sub-Spindle (A2-5) Sub-spindle rated at 6,000 rpm with an A2-5 spindle nose, for finish-machining the second side of the workpiece. Part off-loader included. Compatible with an automatic part loader (APL) for loading/unloading from the main spindle. Turret and Tooling Turret 12-station hybrid (6x VDI40 + 6x BOT) Live tooling 4,000 rpm, with C axis Bar Feeder – Haas Bar Feeder V2 Bar diameter 9.5–79.4 mm Iodpfszz H Nrjx Angsig Bar length up to 1,219 mm Installation kit For 44 mm bar capacity (9–38 mm liners) included Weight 408 kg Control and Connectivity ● Haas NextGen control with touchscreen ● 1 GB onboard program memory ● Ethernet interface and WiFi connectivity ● HaasConnect – remote machine monitoring ● HaasDrop – wireless file transfer from a mobile device ● Visual Part Programming System plus user-definable macros Additional Equipment Included ● Coolant tank, 114 liters, with pump ● Hydraulic chuck, 165 mm, A2-5 ● Bolt-on tool holder kit ● Automatic parts probe (manual and automatic mode) ● Chip conveyor, hinged-belt type ● CNC control cabinet cooler ● Air blast on chuck and air jet on sub-spindle ● Parts catcher system for unattended machining ● Rigid tapping (synchronized, up to 8x feed-back speed) ● Spindle orientation ● Power outage detection module ● Lifting eyes for machine transport ● Metric measurement units Weight and Electrical Machine weight 3,584 kg Electrical connection 220 VAC / 40 A or 440 VAC / 20 A, 3-phase Air requirement 113 l/min @ 6.9 bar (min 5.5 bar)

Condition: used, Year of construction: 2012, Centramec Oktabinwender Mk2 — Technical Data Manufacturer: Centramec AB Model: Oktabinwender Mk2 (Octabin Turner/Tipper Mk2) Document ref.: H-KU 0032g(DE), Rev. E.K., dated 2012-11-05 Pallet / Octabin capacity: Pallet size: container pallet 1140 x 1140 x 160 mm, four-way pallet Octabin min. height (incl. pallet): 1390 mm Octabin max. height (incl. pallet): 2590 mm Max. weight (incl. pallet): 1200 kg Electrical connection: Supply: 400 V AC, 6 A Protection class: IP55 Terminals: L1, L2, L3 Pneumatic connection: Pressure: 6 bar Connection size: 8–12 mm Air consumption: approx. 20 l/stroke Dimensions (stand): Height: 3592 mm Width: 1906 mm Depth: 2554 mm Weight: Iodpszz N U Rjfx Angoig Stand weight: approx. 2300 kg Noise level: Below 70 dB(A) Installation / space requirement: Height: 3500 mm Width: 4000 mm Depth: 3000 mm Fixing: 4x4 M16 expander bolts, length 100 mm, machine must be anchored level to the floor Handling features: Control console with rotate and lift functions, plus stop button Lifting eyes and fork support for forklift/crane transport Pallet lock engages during rotation, holds pallet until turner rotates back 180° rotation of hood + octabin around a turning disc

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M10L/8705, Offer Number: M10L/8705 Machinetype: boltmaker 4 die 4 blow Info: bushing cut-off , PKO , IFO Make: NEDSCHROEF Type: BS3 Constr. year: 1978/2017 diameter range: 6-10 mm number of dies: 4 number of stations (incl. cut off): 7 cutting length: 75 mm shaft length under head: 50 mm Iijdewi Su Sjpfx Angsg output - pieces/min: 285 max. width acros flats: 17 max. thread length: 50 mm press power: 110 to Location: In our warehouse

Condition: used, Year of construction: 2014, YCM NSV 156A – Vertical Machining Center Vertical machining center with a 30-tool tool magazine, controlled in 3 axes with a Fanuc MXP-200FB control system. New Z-axis cover will be installed, 3400 cutting hours, standing under power. - Working range X/Y/Z: 1530 / 650 / 610 mm - Table surface: 1630 x 650 mm - Spindle taper: ISO 40 - Spindle motor: 22/7.5 kW (1 min/cont.) Included Optional Equipment - Spindle speed 12,000 rpm, BT40 Big Plus, 22/7.5 kW (1 min/cont.) - Tool changer/magazine for 30 tools, BT40 Big Plus - Spindle chiller - High-lift chip conveyor, hinge-belt type - Full enclosure guarding with roof - Through-spindle coolant, 20 bar, via pull stud - Heavy-duty coolant pump, 3 bar - Coolant nozzles around the spindle - Chip flush-out - Oil skimmer - Automatic main power shutoff (M30) - M-code, 1 pair - Safety door - Foundation bolts - Tool length/diameter/breakage measurement (Renishaw TS-27R) - CE marked - Prepared for 4th axis Technical Specifications – YCM NSV156A Travel Travel X/Y/Z 1530 / 650 / 610 mm Spindle nose to table surface 80 – 690 mm Table Table surface1630 x 650 mm Number of T-slots, pitch6 x 18 x 100 mm Table load capacity1500 kg Table surface to floor 950 mm Spindle (tool standard MAS BT40 Big Plus)Speed, S5 12,000 rpm Max torque 127 Nm Feed Rates traverse X/Y/Z48 m/min Working feed X/Y/Z, max1 – 20,000 mm/min Motors Spindle (1 min/10 min/cont.)22.0 / 15.0 / 7.5 kW AC X-axis feed5.5 kW AC Y-axis feed5.5 kW AC Z-axis feed 5.5 kW AC Ball Screws X/Y/Z axis Ø 45 mm Tool Changer Number of tool positions 30 Changing system Random (tools swap positions) Tool standard MAS BT40 Big Plus Pull stud YCM Max tool length 300 mm Max tool diameter (all pockets occupied)76 mm Max tool diameter (with adjacent pockets empty)125 mm Max tool weight6 kg Machine Dimensions Height 3051 mm Floor space, approx.2770 x 3855 mm Weight, approx.10,000 kg Power requirement39.5 kVA Standard Equipment NSV 66A, NSV 85A, NSV 102A and NSV 156A, with Fanuc MXP200FB control system - Spindle motor Alpha T8i (22 kW / 1 min) - Speed 12,000 rpm, max torque 127 Nm - Spindle ISO 40 - Tool standard MAS BT40 Big Plus + YCM special pull stud - Spindle chiller - Chip augers, dual, on both sides of the table - Fully enclosed guarding with roof - CE marked - Fanuc MXP200FB control system with YCM software - PCMCIA card for easy program transfer and expanded memory Iodpezz Ad Sefx Angsig - Memory 1280 m (512 kb) - 10.4" TFT color display with graphics - Manual Guide i – simplified menu-driven programming - AI Operation Plus - Helical interpolation - Tool offsets, total 200 - Coordinate systems: 48 - Synchronized (rigid) tapping - Macro B - Tool offset type C - High-speed function AI Nano CC - RS-232 interface

Condition: used, Boltmaker Sacma SP27 Year: 1984 4 Dies plus pointer and threader. Cut-off diameter (max): 10,5 mm Cut-off lenght (max): 85 mm Die Kick-out (max): 65 mm PPM max: 275 parts/minute Isdpfxezqu S Ho Angeig

Condition: good (used), functionality: fully functional, battery capacity: 920 Ah, remaining battery capacity: 70 %, battery voltage: 24 V, overall weight: 658 kg, total height: 630 mm, total length: 827 mm, total width: 485 mm, Forklift battery 24V 8PzS920, battery 70% TESTED Year of manufacture: unknown Weight: 658 kg Dimensions: 827 mm x 485 mm x 630 mm Equivalent to 24V 8PzS1000 Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test): 649/920 Ah battery Remaining capacity: 70% With Aquamatik filling system (BFS) With terminal bolts, but WITHOUT terminal connector Iodpfx Anoz Da Spjgoig

Condition: good (used), Lubricating bolt for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple, bolt crane bolt, lubricating bolt -Grease bolt: crane bolt type 75x145 M48 -Shaft: Ø 59.6 mm .: 1045 1707 -Number: 10x bolts available -Price: per piece Isdpfxjv Ilc Is Angeig -Dimensions: Ø 80 x 150 mm -Weight: 3.4 kg/piece

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. Iiedpfx Asy Hl Hpjngsg New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: used, Reading type . 0 weight - pallet system . kg length . mm Accuracy 0.01 mm The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to sell the machine prior to purchase; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Isdpjyukd Iefx Angoig If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.