Used Armã Cutting Machine for sale (66,535)

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm Fedpfx Asycuypjm Espp - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Fodpfx Aozlt Ayom Eopp This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Year of construction: 2008, condition: used, Laser power: 4000W, power supply: 400V/50Hz, control voltage: 24V DC, required fuse rating: 3x160A, compressed air connection: 7-10bar, nitrogen connection (N₂): 30bar, oxygen connection (O₂): 20bar, connected load: 88kVA, operating hours: approx. 46,000h. An on-site inspection is possible. Fpsdpfj Ah Tyqsx Am Esp

Condition: used, functionality: fully functional, Year of construction: 2007, CO2 laser resonators Fsds Ah Sp Ejpfx Am Espp 2 COMPLETELY IDENTICAL UNITS FROM THE SAME YEAR. 1 unit in excellent working condition. 1 unit in poor condition, recommended for parts. *BOTH UNITS ARE SOLD TOGETHER. Brand: Electronic Engineering Model: C3000 Year: 2007 Originated from a CO2 laser. Brand: RAINER Model: LaserOne 1530 C3000 Control: Siemens 840 DI

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Fpodpfx Aozz A A Ijm Eop Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Inspection while the system is running is welcome.

Condition: new, functionality: fully functional, Year of construction: 2025, travel distance X-axis: 50,000 mm, travel distance Y-axis: 4,000 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: cooling unit, GS-50040LB (Bevel Cutting) Ultra-Large Format Laser Cutting Machine 40kW Bevel Cutting + 60kW Straight Cutting Dual Beam, Dual Head, Dual Ultra Ultra-Large Cutting Area: 50m × 4m Dual High-Power Cutting Heads – 60kW Straight & 40kW Bevel Cutting Precision Cutting for Ultra-Thick Plates Bevel Cutting Performance: ✔ Y-Bevel: 40kW | 20mm Carbon Steel | 1.4m/min ✔ K-Bevel: 40kW | 30mm Carbon Steel | 0.35m/min ✔ V-Bevel: 40kW | 50mm Carbon Steel | 0.2m/min ✔ Straight Cutting: 60kW | 150mm Carbon Steel | 0.3m/min Fedpfx Aev Ng E Tsm Espp Applications: Aerospace | Shipbuilding | Bridges | Heavy Machinery

Condition: used, Max. cutting width: 760mm, max. insertion depth: 760mm, max. stack height: 110mm, table height: 900mm, length: 1750mm, width: 1520mm, height: 1400mm, weight: 1.04t, an on-site inspection is possible. Fjdj Aiu S Aepfx Am Ejpp

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Equipment: – programmer with touch screen Fpsdpfx Asz Rki Hjm Eop – photocells – air table – cutting line – chrome table surface – enlarged side tables – hydraulic clamp with smooth force regulation – instructions – full set of tools – plate for clamp – tapping block – spare knife

Condition: good (used), Robust 800 Roll-to-Sheet Slitter Fpodpfx Ams Ad Hi Ie Eep Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Total power: 3.5 kW Working width: 800 mm Maximum roll diameter: 600 mm Maximum roll weight: 250 kg Feeding/cutting length controlled by computer Working speed adjustable via inverter Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm Weight: approx. 1100 kg Includes a sheet outfeed table.

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off Fpedpe Ahi Trofx Am Eep - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Paper cutters fo pin feed available. Fpsdpfxstwc Abo Am Esp We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Just let us know and we have the solution!

Year of construction: 1993, condition: used, The REGA 6 indexer notches and prints directories onto pocket diaries, small books, or stapled/glued booklets. The machine is equipped with four processing stations and two magazines. The books are transferred from the input magazine to the processing stations and to the unloading magazine using an advancement system. Books to be notched must be manually stacked in the feed magazine. At the first processing station, a counting device and an opening finger open the book at the correct place. The index is notched in the second processing station, where each sheet is taken separately, placed on the blade, and notched. The third and fourth stations are intended for printing the directories. The use of two printing devices allows for two-color printing. Then, the book is closed and advanced to the unloading magazine to be stacked. The transport, opening, notching, printing, and stacking all occur automatically. The notched and printed books are manually unloaded from the stacking magazine. Equipped with: Infeed station Fpsdpfoxdxnfex Am Eep Opening station Index cutting /notching station Printing station 1 Printing station 2 Delivery Various printing units/knifes etc, see pictures. Technical details: Book formats: Height: 70 - 170 mm Width: 70 - 115 mm Thickness: 1 - 15 mm Paper weight: Content: 30 - 120 g/m² Cover sheet: up to 180 g/m² Tabs Number: 1 - 40 (per book) Tab width: 15 mm Tab positions: Individually programmable, up to 40 positions Number of sheets per tab 1 - 35 sheets/tab Individually programmable for each tab Notching performance Number of notches per second: 2 - 7 tabs

Condition: ready for operation (used), functionality: fully functional, A very nice Ideal type 5251-90 is for sale. It features a digital display and automatic pressing, operating on 220 volts. It comes complete with an extra blade. You are welcome to test this machine at our location. We can arrange transportation and packaging for you and load it into a truck or container. Fpjdpfe Ahh T Esx Am Esp Please inquire about a price including transportation (within the Netherlands). Best regards, Henk Hoos.

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: automatic, laser power: 3,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness copper (max.): 10 mm, input voltage: 380 V, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, Laser Welding Machine – BWT 3000W, Water-Cooled Fjdpfx Amj Aic Ils Espp Nitrogen Generator – 80W, Model N2-T1

Condition: used, Year of construction: 2023, functionality: unexamined, total width: 3,000 mm, total length: 6,000 mm, Equipment: documentation/manual, We are selling our CNC plasma cutting machine at our Krefeld-Linn location. Unfortunately, this excellent machine is not being fully utilized, so we are offering it for sale. It is suitable for plasma and oxy-fuel cutting. The machine is operational at the location and can be inspected or tested while in operation with some advance notice (personnel must be present on-site, gas must be available). Bevel cutting and marking of components were the applications that, in addition to the generally high quality of the machine and the cut edges, always impressed us. Fjdpfx Ae Aihalem Eepp New price in 2023: EUR 290,000 plus VAT (including installation). Machine designation: MasterCut 6001.30PtkG Plasma rotator "MasterCut" for weld preparation with the Kjellberg® Q 3000 plasma power source Oxy-fuel support, fully automatic Total working area: approx. 6,000 x 3,000 mm Max. travel height: approx. 150 mm Max. table load: approx. 150 mm Guideways in X-direction: milled S49 rails Drives: digital, maintenance-free AC servo motors with IRC Positioning speed: up to 30,000 mm/min Positioning accuracy: ≤ 0.15 mm/m Bidirectional repeatability: 0.05 mm/m 1. Control PC 2. USB 3.0 connection for storage media 3. Remote maintenance module MicroStep RemoteDiagnostics® 4. Flame cutting table with sectional extraction | 6,000 x 3,000 mm 5. Grid cover in the flame cutting table | 6,000 x 3,000 mm 6. Reinforced design of the flame cutting table | 6,000 x 3,000 mm 7. Kjellberg® plasma power source Q 3000 8. Connection of the fine plasma source to the CNC control 9. Control of the automatic gas console 10. Electrical and mechanical torch sensing 11. Integration of an existing Kemper filter system, Type System 8000 with a capacity of 7.5 kW. 12. LED signal column on the portal bridge (2 colors) 13. Tactile shut-off device for guideways 14. Light curtain protection (collision protection) of the portal bridge via emergency stop 15. Smart Z Movement 16. Plasma rotator "MasterCut" with fully automatic support 17. ACTG® - Automatic calibration unit for the bevel cutting unit 18. ACTG® Calibration Report 19. Oxy-fuel support | fully automatic 20. Automatic gas console for oxy-fuel torch (cutting gas: acetylene) 21. Machine cutting torch GCE® FIT+ three (cutting gas: acetylene) 22. Active collision protection 23. Asper Basic® | The 2D programming software (single-user license) including gas system and extraction. We can dismantle and load the system at the buyer's direction and risk.

Condition: used, Year of construction: 2016, controller model: , _____ Description: Year of manuf. : 2016 Base axis (X) : mm Outrigger (Y) : mm Technical Specifications Working area X/Y:4,000 × 2,000 mm Material support area X/Y:approx. 4,100 × 2,100 mm Z-axis travel:approx. 150 mm Max. traverse speed:12,700 mm/min Max. contour cutting speed:7,620 mm/min X/Y positioning accuracy:± 0.04 mm/m X/Y repeatability:± 0.05 mm High-Pressure Pump Manufacturer / Model:Flow HyPlex Prime 30 Motor power:22 kW (30 HP) Max. design pressure:4,150 bar Continuous operating pressure:3,800 bar Fedpfez S S Efjx Am Eopp Max. flow rate:3.1 l/min Power supply:400 V / 50 Hz / 3-phase Standard Equipment :-Dynamic Waterjet XD 3D cutting technology, up to 60° head movement :-PASER 4 abrasive cutting system :-Abrasive storage hopper, capacity approx. 285 kg :-Premium stainless steel catcher tank with water level control :-CleanCut material support system :-Flow Shields splash protection :-Safety light curtain :-FlowMaster PC control system Additional Equipment :-Flow UltraPierce piercing assistance system :-DynaBeam laser height sensor :-LaserPointer :-Pure water conversion kit

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 20110006, Finecut WMC precision cutting machine. The machine is in working order and can be tested. Fpodpfo Afdh Djx Am Ejp Working area: 500 x 500 mm Maximum material thickness: 50 mm The machine is supplied without a high-pressure pump.

Condition: good (used), Gear Hobbing Machine Strausak 30 Workpiece diameter for manual loading: Ø 35 mm Workpiece diameter for magazine loading: Ø 15 mm Workpiece diameter for fully automatic loading: Ø 10–12 mm Maximum hobbing length: 12 mm Plunge feed at 42% of longitudinal feed: 22 mm Plunge feed at 25% of longitudinal feed: 14 mm Module in steel max.: 1.0 mm Module in non-ferrous metals max.: Solid material ø26 / ø35 mm Selectable number of teeth: 5–390 Cutter speeds: 1160–8550 rpm Plunge feeds per workpiece revolution: 0.0325–0.273 mm Longitudinal feeds per workpiece revolution: 0.033–0.65 mm Cutter diameter: 8–24 mm Machine weight: 600 kg Main motor: 0.8 HP at 3000 rpm Hydraulic motor: 0.25 HP at 1500 rpm Fpsdjx Dxu Sepfx Am Esp Coolant motor: 0.25 HP at 1500 rpm No guarantee is given for the accuracy, completeness or timeliness of the information provided.

Condition: like new (used), functionality: fully functional, Laser power ≤ 6000 W Wavelength 1064 nm Laser class 1 Supply voltage 400 V, three-phase Rated current 16 A Fsdpfxo Ahzpcj Am Eopp Frequency 50 Hz Fuse 16 A, slow-blow Duty cycle 100% ED (continuous operation) Protection class IP40 Cooling: Internal air circulation Compressed air: 8 bar, less than 100 liters/min The RayCutter systems were specifically developed for the following materials: PKD: Polycrystalline diamond, for example for cutting blades. CBN/PCBN: Cubic boron nitride for extremely hard cutting tools. CVD diamond: Synthetically produced diamond. MKD: Monocrystalline diamond. Hard metal and diamond-coated tools: depending on machine configuration and machining process. Typical applications include cutting tool contours, producing precise cutting edges, relief angles, bevels, and complex tool geometries.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 12 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. Please also note our attractive leasing/hire-purchase offers. - Machine with automatic exchange table - Machine bed lined with graphite plates - Machine measured and adjusted with Renishaw system (including measurement protocol) - very space-saving - extremely energy-efficient cutting system - requires only approximately 8.5 x 3.5 meters of floor space - 12 kW laser source from MaxPhotonics (G5/German version) - Top quality, schedule a viewing now! Fedoxg Dn Aopfx Am Espp Cutting of steel sheet up to 35mm Cutting of stainless steel sheet up to 20mm Cutting of aluminum sheet up to 20mm - Travel range 1500 x 3000mm - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures of the cutting head - on three sides, large laser protection windows for observing the cutting process - automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - incl. nesting module - very easy to operate - powerful laser chiller - Machine control in German - extensive service and warranty services - powerful laser chiller - Filter extraction optional The following options are also available: - automatic nozzle changer (optional) - automatic nozzle centering (optional) - Raw material sheet detection and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap plate management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5m Height: 2.3m Width: 3.5m Total weight: approx. 8000kg Do you need a different laser power, different table shape, or different table size? No problem. I will gladly prepare a suitable offer. For example, a 2 kW machine from 29,990 euros or a 6kW machine from 79,900 euros Are you unsure which laser power is suitable for your application? Just call us! Of course, I will carry out cutting tests according to your requirements. There are many possibilities here.

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Fodo Ad Hk Eopfx Am Eepp Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system Fsdpfxjv D T H To Am Ejpp loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Condition: good (used), EBA MultiCut 720 CNC Fsdpo Ahwhaofx Am Eopp Full hydraulic cutting mahine Gutting 720 mm / 100 mm height. CNC program , Airtable

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. Fpjdpfx Amsvmwn He Esp ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2015, operating hours: 19,915 h, laser power: 5,000 W, warranty duration: 6 months, Equipment: cooling unit, DG Tech – Authorized BLM Group Inspection Center DG Tech was created as a spin-off of DGService to specifically address the market for used BLM Group machinery. Leveraging our extensive experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machinery, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Fjdpfew Dcd Hjx Am Eepp 4000x2000 LONGITUDINAL PALLETS - IPG 5000W