We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
Yvjk2c
- Atlas Copco - T 30 R-01 Flexiroc | Used Drill in good condition. Our expert inspector checked 68 inspection points - 68 were approved, 0 showed imperfections, 0 presented issues. Buy it now for
EUR 97.000
or make us an offer. We can deliver from Nokia, Finnland to your destination. You can estimate the cost using our price calculato...
Type of fuel: Diesel
Field of application: Construction
Drp8msu0
Empty weight: 1.100 kg
Make of engine: Kubota
Generator capacity: 30 kVA
Transport dimensions (LxWxH): 2.1x0.95x1.11
Please contact Sales Department for more information
A set of low hours used oil free air ends, LP & HP taken from compressor with run hours of 24000 hours, removed as part of the all inclusive cover These units are good for 60000 - 80000 hours, I have test run, the intercooler pressure is 2.2bar on load and -0.65bar off load
1616 6990 81 HP Superseded by 1616 7271 81
Y3bx3ejd
1616 6960 81 LP Superseded by 1616 7275 81
BAFA funding: BAFA-eligible, but in conjunction with BAFA-eligible compressors.
Technical data:
Volume flow 30 l/s
volume flow 1800 l/min
volume flow 1,8 m³/min
Pressure dew point + 3 °C
Differential pressure 0.300 bar
Power consumption 0.28 kW
Operating voltage/frequency 230/1/50 V/phase/Hz
Refrigerant R513A
Ciiyfyc9wh
Reference conditions:
Operating pressure 7 bar
Compressed air inlet temperature 35 °C
Ambient temperature 25 °C
Relative air humidity at inlet 100 %.
Limi...
Year 2013
Engine hours 10,400
Nominal output power
40 KVA
rated current
57.1A
nominal voltage
400V
Libra
1041 kg
Type of cooling
in
Transport length
2.1m
Transport width
0.95m
Transport height
1.17m
Engine manufacturer
Kubota
Engine type
V3800DI-T
Engine power
38 kW
Emission level
Dmnkjkd
3A
Oil-free screw compressor Atlas Copco
Modell ZT30
Pwgevy
Serienumber AII704521
Year 2004
Motor 30Kw
Latest performed service 4/2-20
Running hours 34552 tim (at latest service)
Has been standing in hospital environment, service has been made regular
The compressor has been dismantled in Feb.2021. all in good working condition before dismantling
piston compressor used only for some demonstrations, equal to the new. price list euro 2700. silenced
features
Bd780t
bar max 10
flow rate 444 liters / min
power 2.2 kw- 3 hp
tanks of 500 and 725 liters are also available on request
BAFA funding: BAFA-eligible, but in conjunction with BAFA-eligible compressors.
Technical data:
Volume flow 30 l/s
volume flow 1800 l/min
volume flow 1,8 m³/min
Pressure dew point 3 °C
Differential pressure 0.25 bar
Power consumption 0.41 kW
Operating voltage/frequency 230/50 V/Hz
Refrigerant R513A
Reference conditions:
Operating pressure 7 bar
Compressed air inlet temperature 35 °C
Ambient temperature 25 °C
Relative air humidity at inlet 100 %.
Limit values:
Ambient tem...
Used diesel power generators in good mechanical condition.
30kVA/24kW.
Engine: Kubota (Japan)
Alternator: Stamford
Operating hours: approx. 25000
Manufacturing date: 2008
Available for immediate collection in Denmark.
3999 EUR plus VAT. (VAT extempt if payment from outside Denmark).
EXW Greve, Denmark.
Payment prior to collection.
No warrenty. Bought as is.
First come first serve.
Pxq923
A fully refurbished desiccant drum, replaced parts:
Bpl3hnjco
Top and bottom centre wear seals in PTFE
Outer perimeter wear seals in PTFE
Centre to outer seals in PTFE
Fully guaranteed process in use since 2008 100% satisfaction
Installation service available can offer replacement drum seal, O-rings and demisters
All models available
IMD260, MD27, MD50, MD100-MD400, MD600-MD800, MD1000-MD1300, MD1800-MD2600, MD3, MD4, MD5 & MD6 IMD600-800
This is a service exchange offer
ATLAS COPCO CP 22Kw screw compressor 2013
Screw compressor CHICAGO PNEUMATIC CPB30 machine after service ATLAS COPCO GROUP
I9hmhrt
Technical data:
capacity: 3.20 m3/min;
22 KW motor;
pressure 10 bar;
year 2013
we provide service
12500 zł net
15375 zł gross
For sale is a diesel generator in very good condition.
INIMEX Ref: I000848
Cheitpc93q
Technical data:
Manufacturer : Atlas Copco
Type : QAS 30
Condition : Very good
Engine : Yanmar diesel
Power : 30 kVA
RPM : 1500 rpm
Frequency : 50 Hz
Voltage : 230 / 400 V
Operating hours : 9.674 h
Year of manufacture : 2000
- Batteries included
- Incl. diesel tank in base frame
- Immediately ready for use
- Shipping possible on request.
The generator is in very good condition and can be viewed...
AC generator for continuous operation in places where there is no electricity or as a backup unit in the event of a power outage. The low tare weight is useful because it can be towed behind any vehicle.
One owner each.
Fully operational - the last service at the Dealership made on 26/07/2022.
Output current: 29A,
Socket 230V 10A - 1 piece
Socket 400V 16A - 1 piece
Socket 400V 32A - 1 piece
Diesel fuel tank up to 80 L.
Low fuel consumption!
Silent version (only 91 dB.)
Ra0gx
No. Serial : APP ...
Emulsion splitting plant Oil-water separation system
The inexpensive and permanently reliable
Befumu0m
The solution to the problem is usually the oil/water
Separation for dispersed condensates. The
purified water meets the legal
Sewer discharge regulations
-Dimensions: 650/520/H1000 mm
We offer 2x rebuilt Atlas Copco/ Epiroc SB302 from 2020 with NEW bushes, 2x tool pin, 1 stop pin, seal kit, hoses, chisel and new painted.
B9uos9yv0z
We can ship world wide. Contact us for other models as well.
SB202 SB300 SB152
This Atlas Copco ZT30, 2 stage oil free air compressor provides 163cfm at 7.5bar. The outlet is 1 1/4″bsp connection is 1195kg and 1910L x 965W x 1750H (mm). This compressor is in fantastic mechanical condition, the intercooler pressure is just 2.25bar can be seen running
Byalzeyboc
Exhibitor - Atlas Copco Screw compressor FX5 - 5 l/s - 300 l/min
Year of manufacture 2022 | Condition: Very good
Technical data:
Volume flow 5 l/s
volume flow 300 l/min
Volume flow 0.3 m³/min
Pressure dew point + 3 °C
Differential pressure 0.150 bar
F33awxz
Power consumption 0.130 kW
Operating voltage/frequency 230/1/50
Refrigerant R513A
Reference conditions:
Operating pressure 7 bar
Compressed air inlet temperature 35 °C
Ambient temperature 25 °C
Relative air humidity at inlet...
For sale is a diesel generator in very good condition.
INIMEX Ref: I000816
Technical data:
Condition: Very good
Manufacturer: Atlas Copco
Model: QAX 20
Cgsxx7jiks
Engine: Deutz Diesel
Power: 20 kVA
RPM: 1500 rpm
Frequency: 50 Hz
Voltage: 230/400 Volt
Operating hours: 7.856 hours
Year of manufacture: 2006
Weight: 1060 kg
- Batteries included
- Incl. diesel tank
- Incl. silencer
- Incl. all documents for trailer
- Immediately ready for use
- Shipping possible on request.
The ge...
We sell
a used screw compressor Atlas Copco
INIMEX Ref: I000686
Type: ZT 30
Year of manufacture: 2006
Operating hours: 57.669 h
Load hours: 27,440 h
Power: 30 kW
Pressure: 7,5 bar
Cdxahstxyu
Sold without warranty and without liability for material defects
Shipping possible on request
The compressor is in very good condition and can be viewed and tested if interested and after prior appointment or watch the test video on Youtube, we take no responsibility and have no warranty after pur...
Variable speed drive. Volume flow 1,0 - 5,58 m3/min. at 7,0 bar. With built-in compressed air refrigerant dryer. Refrigerant R 134a. With energy recovery.
Hvnranx
Type: AT 500 Condition: functionally tested, very good, used - suction capacity 650 l - boiler capacity 500 l - maximum pressure 12 bar - automatic star delta switch
Ch2uxcvtky
Atlas Copco
ZS4 VSD+ 45kW 1.0 E
screw blower
Screw blower, oil-free compressing with sound insulation hood with control and frequency converter.
Cigyyg2wzn
Cooling: air
Drive power: 64.00kW
Final pressure: 1200mbar
Delivery quantity: 7.25 - 30.33m³/min
Motor bearing damage
Pneumatic double diaphragm pump
Bcavd2zxj9
-Fast venting and immediate suction of the medium
-Dry running without: damage
-Hermetically sealed for: moisture-sensitive liquids
-Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces:
-Air max. Pressure: bar
-Air connection: 1 "inch
-Water output: l/min
-Water max. Pressure: bar
-Connection: B coupling
-Dimensions: 480/400/H530 mm
-Weight: 32 kg
Type of fuel: Diesel
Field of application: Construction
Empty weight: 3.120 kg
Make of engine: Volvo Penta
Generator capacity: 200 kVA
Transport dimensions (LxWxH): 3.8x1.2x2
Please contact Sales Department for more information
Ci0tvbze2z
Machine has been traded in. This is a take-away price.
Is maintenance required.
Operating hours unknown (estimate 30,000)
Power consumption 5.5kW
Ci0wuxcsz0
Price is ex staphorst (NL)
We can ship these for a fee
We offer you well maintained/ rebuilt Atlas Copco/ Epiroc MB1700 from 2016 with NEW Auto Lube, seal kit, bushes, dust viper, 2 guide plate, 2 guide plate small, 2 shock absorber, dust viper, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted.
Kvyfay2x
We can ship worldwide.
MB1650 HB2200 HB2500 HB3000 HB3100 HB4100 HB4700 HB2000
Field of application: Construction
Empty weight: 1.060 kg
Make of engine: Deutz D2011L03
Capacity: 5 m³/m
Compressor type: Screw compressors
Working pressure: 7 bar
Please contact Sales Department for more information
Civj2zm7wc
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Stroke: 250 mm
-Piston diameter: 40 mm
-Piston rod: 16 mm
-Price: per piece
2rnqya
-Number: 2 pieces
-Dimensions: 410/55/H55 mm
-Weight: 1.5 kg/piece
Field of application: Construction
Make of engine: Deutz TCD2013
Capacity: 10,4 m³/m
Cfuuvkssda
Compressor type: Screw compressors
Working pressure: 12 bar
Please contact Sales Department for more information
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
-Stroke: 240 mm
-Piston rod: Ø 40 mm
-Number: 2x cylinders available
-Price: per piece
-Dimensions: 320/280/H470 mm
-Weight: 34 kg/piece
Bub0ad2wri
Field of application: Construction
L9fps9f
Make of engine: Deutz TCD2013 L04
Capacity: 10,4 m³/m
Compressor type: Screw compressors
Working pressure: 12 bar
Please contact Sales Department for more information
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
Gtt3tl3uw
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
-Stroke: 200 mm
-Piston rod: Ø 40 mm
-Total dimensions: 330/280/H510 mm
-Weight: 33 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200
-Stroke: 194 mm
H3xa9ti9
-Piston rod: Ø 40 mm
-Total dimensions: 220/265/H645 mm
-Total weight: 24 kg
Morlock Motors official partner of Machineseeker and Truckscout24
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker still biggest sponsors of 2nd German football league
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 250,000 inquiries per month
Sample sales contract for used machines in nine languages
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.