Adam Power Systems GmbH
Thank you for your interest in our machines, please take a look at our other offers,
Nothing found ? then feel free to ask us
***** ***** ***** ***** ***** *** *****
For sale there are 2 diesel soundproof emergency generators in very good condition.
Manufacturer: Olympian CAT
Model: GEP 380
Engine: Perkins 6 cylinder turbo diesel series 2300
Type number: 2306 CE14TAG2
RPM: 1500 rpm.
Frequency: 50 Hz.
Operating hours: 1st unit 2,50... more
Your contact persons in our company:
Mr: Andre Evering
Mr: Marcel Brahms
Mr: Simon Blank
We offer you here a used pallet rack cross beam
of the manufacturer SSI Schäfer for purchase.
Technical data of the pallet rack cross beam:
Shelving system: SSI Schäfer
Type: PR 350/400
Included in the scope of delivery:
01x pallet rack cross beams, second-hand
Material colour: orange
INP profile: 100 x 50 mm
Agraffe: 5 HK (hook)
clear width: 3.600 mm
max. load per pair of cross beams
2,000 kg, wi... more
saw blade DM 300 mm
motor 2,2 kW
Advise used machines:
• Technical data without obligation, mistake and intermediate sale reserve.
• Price is considered ex-location price
• All articles or machines are bought as seen without any entitlement on warranty.
• It is left to the choice of the buyer to view the machines before at its location.
• Special arrangements are possible but only valid in written form.
(We answer your inquiries only with stated address + telephone numb... more
4 blade construction wood circular saw Schuhmacher overhauled
cutting height 350mm
Driven roller conveyor - extension rollers next to the saw blades
Chain infeed up to 6m timber length, with infeed mandrels that can be set up via foot switch
Feed infinitely variable
Electrical cutting width adjustment
4 pieces saw motors, power 4 x 18 kW
4 pcs. pull-out roller motors, power 4 x 0,37 kW
1 piece feed gear, power 2.2 kW
1 piece Cutting width adjustment motor, power 0.18 kW
Total power 76 kW
saw blade diameter 350 mm
cutting diameter - mm
stroke - mm
capacity 90 degrees: round 120 mm
capacity 90 degrees: flat 170 x 100 mm
capacity 90 degrees: square 100 mm
total power requirement 1,4/1,9 kW
weight of the machine ca. ca. 350 kg
dimensions of the machine ca. 1600 x 900 x 2000 m more
Make LAUDA, Type IT HW 350-Ex, Temperating machine , Extra Specifications 20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., pressure 10 bar, heat transfer fluid water, manufactured in 2003, Serial number B17 276, CE 0036 certified , EX II 2 G EEx edm [ia] IIC T3. For control cabinet see 900WP034 What you can expect from Foeth: all our machines are in working condition, and at a reduced price com... more
carrying capacity 350 kg.
number of suction cups 6 Stück
suction cup dia. 160 mm
Sawing unit 4 m3/h
voltage 400 V
total power requirement 0,18 kW
weight of the machine ca. 90 kg.
dimensions of the machine ca. 2.200 x 1.000 x 750 mm more
motor kW (PS) 3(4)
3 knife cutter block Ø mm 88
cutter block speed U/1’ 4900
suction connection Ø mm 120
planer table seize mm 1820 × 350
thicknesser table seize mm 550 × 350
min. / max work piece height mm 4/210
feed speed 6,5/13 m/ min - feeder with sprockets - no V-belts!
weight approx. kg 410
star triangle motor start
mechanical planer table height adjustment
cutter block guard
planer fence tildable 45 deg.
incl. long hole drilling unit
Advise used mach... more
1 used quick steaming unit
manufacturer : CERTUSS
type : Junior
capacity : 350 kg/h
working pressure : 10 bar
water contents approx. : 34,6 l
year of construction : 1994
yoc heating coil : 2014
equipped with Certuss oil burner,
Speck feedwater pump yoc 2012,
switch cabinet built on boiler body and
the existing fine and coarse fittings.
Dimensions of the boiler (approx.):
depth : 1.510 mm
width : 805 mm
height : 1.850 mm
weight : 520 kg more
saw blade diameter 350 mm
cutting diameter 130 mm
dimensions of saw-blade 350 x 3 x 40 mm
capacity 90 degrees: round 110 mm
capacity 90 degrees: flat 170 x 105 mm
capacity 90 degrees: square 100 mm
capacity 45 degrees: round 110 mm
capacity 45 degrees: flat 130 x 105 mm
capacity 45 degrees: square 100 mm
work height max. 900 mm
total power requirement 1,9/2,6 kW
weight of the machine ca. ca.400 kg
dimensions of the machine ca. 0,8 x 0,7 x 1,7 m more
Make LAUDA, Type IT HW 350-Ex, Temperating machine , Extra Specifications 36kW Lauda process heater , power consumtion 38,7 kW, 55,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h, pressure 10 bar, manufactured in 2003, Serial number B17 277, dimensions 1.540 mm Length, 650 mm Wide, 1.610 mm height, CE 0036 certified , EX II 2 EEx edm [ia] IIC T3 , heat transfer fluid water. For control cabinet see 900WP034 What you can expect from Foeth: all our machin... more
saw blade diameter 350 mm
cutting diameter 120 mm
speeds 1700/3400 U/min
dimensions of saw-blade 350 x 32 mm
Max. opening of wise 180 mm
capacity 90 degrees: square 105 mm
capacity 90 degrees: flat 180 x 70 mm
capacity 45 degrees: square 100 mm
capacity 45 degrees: flat 135 x 60 mm
air pressure - required 6 bar
weight of the machine ca. 160 kg
dimensions of machine 1,2 x 0,7 x 1,6 mm
Space required for the entire system 10,9 x 0,7 x 1,6
Condition: ready for opera... more
saw blade diameter 315 / 350 mm
cutting diameter 125 mm
capacity 90 degrees: round 125 mm
capacity 90 degrees: flat 160 x 90 mm
capacity 90 degrees: square 110 mm
capacity 45 degrees: round li. 105 / re. 70 mm
capacity 45 degrees: flat li. 80 x 100 / re. 60 x 8 mm
capacity 45 degrees: square li. 90 / re. 65 mm
speeds 30 + 60 U/min
total power requirement 1,8 / 2,5 kW
weight of the machine ca. 0,2 t
dimensions of the machine ca. 0,6 x 1,22 x 1,06 m more
Profile steel shears, profile shears, punch, punching machine, hole punch
-Pressure force: 35 to
-Equipment: large support table with stops for punching
-div. Stamps and dies
-Dimensions 1460/1700 / H1690 mm
-Weight 1080 kg more
Make LAUDA, Type IT HW 350-Ex, Temperating machine , Extra Specifications 20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., manufactured in 2003, Serial number B17 275, CE 0036 certified. Control cabinet also for Lauda process heaters 900WP037 and 900WP038 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping... more
Even today we can deliver abroad!
Weco Discovery 350
4 Roll drive
Including a 3 meter welding gun and mass cable.
Price €950,- VAT not refundable.
We specialize in selling new and used welding machines.
MIG / MAG, CO2, TIG, pulse, AC / DC, synergic, water cooled, electrode and plasma.
And also other brands: Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Helvi, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab,... more
Description: Suitable for dressing and profiling of diamond and CBN grinding wheels. Technical data: HSK 50 E grinding wheel holder, diamond grinding wheel diameter 50 - 350 mm, max. grinding wheel width 70 mm, speed of diamond / CBN wheel spindle infinitely variable 100 - 1000 rpm, radius of grinding wheel 0-R30 mm, dressing wheel 180 x 25 x 31.75 mm, rotational speed of dressing wheel 200 - 2000 rpm, Oscillating stroke of the dressing wheel 0-70 mm, connected value of the motor of the dressing... more
Control: Siemens 840D-PL
gear spindle: 6000 1/min; 43 kW; 822 Nm
Cone: HSK 100
Magazine: shelf with 234 places (tool shank cleaning)
Rotary table: 360° x 0.001°
Coolant system: Knoll VRF 250; IKZ 70 bar; workspace flushing)
Working range in mm: 1250 x 1000 x 1300
pallet size: 800 x 800
Wks-voltage: Hydraulic 200 bar
- Cleaned machine
- Geometry and functions tested
- 4. line in the working chamber for hydraulic switching function
- Receiver for radio probes (Renishaw)
- Windscreen blowi... more
Make Van Tongeren Kennemer [...] Beverwijk, Type PSC-350, [...] 10.1018, Material Stainless steel 1.4301 (304), Horizontal conveyor screw (1x), Diameter 350mm, Length 1100mm, Between inlet and outlet ± 700mm, Shaft diameter 170mm, Pitch 145-240mm, Inlet 350x400mm, Outlet dia. 370mm, Motor 2,2 KW, 230/400 Volt (Ex), Screw speed ± 27 Rpm, New 2010, Floorspace 2,4x0,5 M, Total height 0,7 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to ... more
Transfer case, second-hand GA 350-3 DO, condition for the purchase conclusion is a business-commercial activity of the buyer and its corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery are made exclusively on the basis of our GTC:www.autogilles.de/agbMarke:: ZF model: Transfer case GA 350/3 DO / GA350/3DO year of construction: 1985Ma... more
Made in Germany
Working dimensions: 3050 x 1220 mm
Z-axis: 135 mm
Max. workpiece thickness: 50 mm
Rapid traverse rate X - Y - Z axis: 60 (100) - 50 - 20 m/min
Compressed air required: 7 bar
Length: 5900 mm
Width: 3800 mm
Height: 2200 mm
Weight: 3150 Kg
Drilling and milling were renewed last month
Available inspection under working conditions more
length in total: 5800 mm
band width: 320 mm
conveying height: 1200
voltage: 380 Volt V
total power requirement: 0,37 kW
weight of the machine approx.: 500 kg
dimension machine [...]: 5,85 x 0,8 x 1,6 m
Chip conveyor (slat-band chain conveyor) model ALUMI
further technical data:
-incidence length/width: 3400 /320mm (conveying length/width)
-ejection height/width: 1200/450mm
-Slide-in unit height/length: 230/3600mm
very good condition! more
Piston compressor, compressor
-Compressor is sold as a spare part carrier
- Delivery as is as seen
-Volume flow 340 l / min
-Max. Pressure 10 bar
-Motor power 4 KW
-tank capacity 150 liters
-Dimensions 1400/500 / H900 mm
-Weight 180 kg more
Make Aviteq Vibrationstechnik, Type OA-1150/350-UVB, No 6300095-001, Material Stainless steel, Material finish Polished inside, Vibro feeder (1x), Feeder width 350mm, Feeder length 1150mm, Feeder height 275mm, Closed , Inlet 355x355mm, With motor 0,3 KW, 230/400 Volt (2x), Mounted on frame , Floorspace 1,8x0,9 M, Total height 1,0 M, Weight 380 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any d... more
Used transfer case ZF GA 350-3 DO f. MB 1619 AK, 1719 AK, 1919 AK ...Condition for the purchase conclusion is a business-commercial activity of the buyer and its corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery will be carried out exclusively on the basis of our General Terms and Conditions:www.autogilles.de/agbMarke:: ZF Model: T... more
saw blade diameter 350 mm
cutting diameter 90 mm
stroke 160 mm
mitter cutting - all-position ± 45 °
turning speed range U/min
voltage 380 V
total power requirement kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 0,80 x 0,85 x 1,35 m
- S/N: 4296
- pneumatic feed
- coolant equipment more
Measurements width 7560 mm
Measurements depth 2500 mm
Measurements height 2000 mm
Machine weight 15500 kg
Clamping force 3500 kN
Opening stroke 650 mm
Max open daylight 1370 mm
Robot Yushin AT XII (1250 mm)
This Hyundai SPE-350 Injection Moulding Machine was manufactured in the year 2003 in South Korea. It can work with clamping force of 3500 kN. It includes a Robot Yushin AT XII (1250 mm) as additional equipment. It presents g... more
cutting diameter 0350 mm
saw band length 4250 mm
cutting width 1,1 mm
capacity 90 degrees: flat 350 x 400 mm
capacity 90 degrees: square 350 x 350 mm
feed length 0 - 400 mm
total power requirement 5,5 kW
weight of the machine ca. 1,8 t
dimensions of the machine ca. 2,45 x 1,97 x 1,5 m
Full automatic bandsaw for straight cuts of material. Machine has an automatic
material feeding system driven by servo drive. The length of the material which
could not been cut is 40 mm (rest length).
Horizontal slotting and broaching machine make HENNING Typ KM 350
Masch.# 19001 Year of construction 1976
broaching length 350 mm
Dimensions approx. 2100 x 1000 x 1300 mm Weight approx. 1200 kg
- Accessories for guide sleeves, broaches
- Operating switch Shock / Clear
- Reverse and set-up mode
- Reverse soft - hard
- Coolant system
used, in good condition more
Exhibition machineBuilt in 2018Deduster NE 350 P, leftNominal volume flow: 6927 m³/hAssociated vacuum: 2,400 Passage-side connection d = 350 mmOperating mode: continuous operationCurrent type: three-phase currentPower consumption: 11.0 kW / 19.5 AFilter surface: 42.13Tensioned bearing volume (total): 480 lWeight approx. 1440 kgNoise level according to EN 23744: 74 dB (A)L x W x H: 4300 x 1120 x 2420 mnecessary connections:- Standard compressed air coupling NW 7 approx. 6 ba, compressed air maint... more
Horizontal end milling machine with electropneumatic feed and automatic machining cycle. like new
Horizontal end milling machine with electropneumatic feed and automatic machining cycle. Milling of intermediate angles, +45° / 90° / -45°. Variable speed of tool rotation with electronic inverter for improved quality machining on painted profiles and at intermediate angles. Quick cutter change with pneumatic control. Scratch-proof work table. Fully guarded and s... more
Max. turning Ø
ATC / revolver
Speed live tools
MAZATROL MATRIX NEXUS
Mk 4 Mk
Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its... more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.