Used Automatic Turntable for sale (23,381)

Condition: good (used), Year of construction: 2019, Schuler BEUTLER press Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Press weight: 72,000 kg Chedpez Hbq Eefx Acpjc including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4796013, ROTOX CORNER PUTTYING MACHINE EPA-479 For applying putty to the weld seams on PVC window frames. 1 Contour milling unit, PLC and 4-axis CNC control. Pneumatic workpiece clamping for profile heights of 50 to 115 mm and profile widths of 50 to 130 mm. Remote control with screen and PC control. Base machine, profile support, window exterior, bottom. Technical data: Compressed air: 7 bar (filter pressure regulator) Voltage: 240/400V, 50Hz, 1.8kW Dimensions: 6,000x4,700x1,900mm (with WT) Weight: 960kg Year of manufacture: 2000 4 ROTOX-EPA-479-ASES 47241908 Milling unit for visible surfaces (grooves and smooth). Top and bottom. 2 ROTOX-EPA-479-FDV-O/U 47251834 CNC milling unit for sealing plane, vertical, from above and below. 2 ROTOX-EPA-479-AI-R/S-VA 47241928 Cedpfx Acsz Iynfjpohc Milling unit for inner corners with a radius or a bevel, including a vertical milling unit up to 23° to the vertical, from below. 8 ROTOX-EPA-479 NC PROGRAMS GEALAN 47211260 8 ROTOX-EPA-479-NCPROG-COPIES for decorative profiles 47211261 1 ROTOX-EPA-479-PE 47211270 Profile recognition in the machine (for NC program copies and profile recognition). ROTOX-EPA-479-WT426-RS Turning station ROTOX WT 426 Transport direction: to the right when viewed from the front. Frame size 350x350mm to 2,000x2,000mm, for automatic feeding, turning and further transport of window frames, with support table, drive elements and software. Table size: approx. 4,700x2,500mm

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Chsdpfx Aowz Ev Tjcpsc Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Csdpfx Acod H Hmhepshc Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm CNC control: B&R PP 45 Hydraulic bundle clamping Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Chjdpfxoxlcpve Acpec Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: 4 new saw blades Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Year of manufacture: 1997 Control system: Fanuc 18 i-T Csdpfx Acjz Hcciepohc with loading magazine Iemca CH 220/32 Year of manufacture: 1998 Technical data: Spindle bore: 16 mm Spindle travel: 140 mm Main spindle speed: 500 - 12,000 rpm Counter spindle speed: 500 - 8,000 rpm Speed: driven tools: 0 - 4,000 rpm (remaining data see photos) Approximately 6 months ago, the counter spindle was fitted with new bearings. The machine can be inspected while in operation and under power.

Condition: used, Year of construction: 2002, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Automatic Lisec butyl application machine, left to right, year 2002, consisting of: FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2×7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift (up to overhead frame conveyor) Chedpfxez Ipcro Acpjc FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria and can be seen in our warehouse on appointment

Condition: good (used), Year of construction: 2019, Rollfix 700 automatic rolling machine - used - year of manufacture 2019 - computer control with touchscreen Chedpfjz Hv U Ejx Acpjc - automatic flour dispenser - automatic dough rolling - production machine - inspected and cleaned - stainless steel construction and housings - collection from warehouse / transport option available - price on request

Condition: excellent (used), Full automatic Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Chedpfx Ajy H Dmnocpjc Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Chsdpfx Asz Iczuecpsc Large work table.

Year of construction: 1993, condition: excellent (used), functionality: fully functional, For sale: original Amafilter B.V. stainless steel pressure leaf filter with approx. 5 m² filtration area. Complete automatic filtration unit with PLC control cabinet, pneumatic valves, sensors, piping, fittings and support frame/platform. Main data: - Manufacturer: Amafilter B.V., Alkmaar, Holland - Type: vertical pressure leaf filter - Filtration area: approx. 5 m² - Filter vessel: stainless steel - Vessel volume: approx. 450 L - Max. working pressure: 6 bar - Max. working temperature: 150 °C - Year of filter vessel: 1993 - Automation: included - Control: PLC control cabinet Chjdpfxozfyafo Acpsc - Valves: pneumatic valves - Includes sensors, piping, fittings, hoses and support frame/platform - Condition: used, fully functional according to seller information - Location: Serbia Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter can be used for crude oil clarification, post-degumming filtration, bleaching earth filtration and general liquid-solid separation in oil processing. The unit is sold as shown in the photos. Inspection possible. Loading possible. Zum Verkauf steht ein originaler Amafilter B.V. Edelstahl-Druckblattfilter mit ca. 5 m² Filterfläche. Komplette automatische Filteranlage mit PLC-Schaltschrank, pneumatischen Ventilen, Sensoren, Rohrleitungen, Armaturen und Tragrahmen/Plattform. Technische Daten: - Hersteller: Amafilter B.V., Alkmaar, Holland - Typ: vertikaler Druckblattfilter - Filterfläche: ca. 5 m² - Filterbehälter: Edelstahl - Behältervolumen: ca. 450 L - Max. Betriebsdruck: 6 bar - Max. Betriebstemperatur: 150 °C - Baujahr Filterbehälter: 1993 - Automatisierung: inklusive - Steuerung: PLC-Schaltschrank - Ventile: pneumatische Ventile - Sensoren, Rohrleitungen, Armaturen, Schläuche und Tragrahmen/Plattform inklusive - Zustand: gebraucht, laut Verkäuferangabe voll funktionsfähig - Standort: Serbia Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Einsetzbar für Rohölklärung, Filtration nach Entschleimung, Bleicherdefiltration und allgemeine Fest-Flüssig-Trennung in der Ölverarbeitung. Verkauf wie auf den Fotos. Besichtigung möglich.

Condition: used, functionality: fully functional, This machine is capable of producing bent bolts with threads on one end (eye bolt) or both ends (u bolt) Cjdpfx Acszt S U Rspjhc

Condition: good (used), Year of construction: 2006, Berg & Schmid Xtech 410 CNC sawing machine Year of manufacture: 2006 Control: - CNC control, freely programmable Chedpjz Ii T Dofx Acpoc Cutting range: - Round: 410 mm - Flat: 410 mm - Dimensions: approx. 3,500 × 2,000 × 2,200 mm - Working height: 730 mm Cutting speed: - 12–110 m/min Equipment: - Material feed via precision ball screw and linear guide - Hydraulic saw blade tensioning - Automatic double-sided saw blade free-travel device - Hydraulically driven chip conveyor - Clamping pressure adjustment for thin-walled tubes and profiles - Frequency-controlled saw drive, stepless - Infeed automation for the first cut - Blade tracking system Saw drive: - 5.5 kW

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 260 mm, control type: NC control, overall weight: 1,100 kg, Equipment: lighting, Band saw machine Manufacturer: Meba Type: Meba Profiline 260-AP Year of manufacture: 2004 Control system: Meba Serial number: XXXX Technical data: ----- - Cutting range 90° round: 260 mm - Cutting range 90° rectangular: 300 x 260 mm - Cutting speed: 15 - 150 m/min (AC drive) - Drive, saw band: 1.5 kW - Scrap length, automatic: 90 mm - Scrap length, manual: 10 mm - Cutting pressure: infinitely variable / electric Chodsz Hbgaepfx Acpjc - Saw frame guided twice via linear guides - Material feed via controlled feed clamp ..with hydraulic material full-stroke clamping - Saw band dimensions: 3,350 x 27 x 0.9 mm - Machine weight: approx. 1,100 kg Accessories: ----- - 5x saw band, new

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Csdpfxsx Ari He Acpohc Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg. Chjdpfx Acez H U I Repoc

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Cedoz Iqnvopfx Acpshc F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations Csdpfxoz Ipr He Acpehc The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. Csdpfx Acjzn Ixnepohc - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown.

Year of construction: 1995, condition: good (used), functionality: fully functional, Automatic sheeting machine for joining single-face/corrugated cardboard sheets, complete with delivery system featuring a sheet turner and palletizer. Maximum sheet size: 1400x1600. Chjdjz Ibmiopfx Acpjc Machine dimensions: - Length: 16630mm - Width: 4330mm - Height: 3350mm

Condition: good (used), Year of construction: 1983, year of last overhaul: 2004, Turning center Chjdoz Hm Snspfx Acpec Manufacturer: TRAUB Type: TD36 Year of manufacture: 1983 Rebuilt: 2004 with: drilling tool holder, material feed system

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Csdsz Iq I Aepfx Acpjhc Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting Chjdpfoz Ip S Hex Acpjc F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Chedpfxjz Ipwcs Acpec F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Chsdpfx Aswd Emwjcpoc Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.