Used Band Feed for sale (13,802)

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic oscillation of sanding belts - Infinitely variable feed speed regulation - Feed motor: 0.55 kW - Main motors: 2 x 4 kW - Air requirement: 6-8 bar Kledpfxsx Swtxs Ab Tjn - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: ready for operation (used), Thomas Mod 310 S.O. Semi-Automatic Hydraulic Bandsaw Metal Saw #7428 Maximum clamping capacity: 300x270mm Dimensions: 200cm x 90cm x 200cm (LxWxH) 380V Variable adjustable cutting speeds Ksdpfx Asylpt Aeb Tsln Equipped with coolant pump Includes 2 additional new saw blades Video available on our YouTube channel. Location: Budel, Netherlands Transport available at extra cost Call or email for more information Check out our other listings as well We are also looking for industrial machines year-round. If you have surplus machines, please email us with photos and information. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition and wear are consistent with its age; used machines are sold without warranty. The price shown is excluding VAT (unless stated otherwise).

Condition: ready for operation (used), Macc Special 400 SI Semi-Automatic Hydraulic Bandsaw Metal Cutting Saw #75258 Specifications • Max clamping capacity: 300 × 270 mm • Dimensions: 150 × 75 × 150 cm (L × W × H) • Double mitre: 60° right / 45° left • Connection: 380V • 2 cutting speeds • Equipped with coolant pump Description Very tidy and well-maintained machine, ready for immediate use. Video available on our YouTube channel. Kjdpfx Ajylprxsb Tsln Other • Location: Budel, Netherlands • Transport available at additional cost Also view our other listings. We are always looking for industrial machinery. Do you have machines available? Please email us photos and information. The seller is not liable for typographical or data transfer errors. The machine's appearance, technical condition, and wear are consistent with its age. Used machines are sold without warranty. The listed price is exclusive of VAT (unless otherwise stated).

Condition: ready for operation (used), Equipment: CE marking, documentation/manual, Kasto Pos GA 4 Fully Automatic Bandsaw Machine / Band Saw / Metal Cutting Saw #4027507 Very neat and well-functioning KASTO Pos GA 4 automatic mitre bandsaw, suitable for precise series and mitre cutting operations. Specifications: • Automatic material feed • Hydraulic material clamping • Cutting capacity 90°: approx. 400 mm round / 400 × 320 mm flat • Mitre cuts up to 60° • Infinitely variable cutting speed (20–110 m/min) • Saw motor: 3.0 kW • Connected load: approx. 6.0 kW (380 V) • Includes coolant and mist lubrication system • Dimensions: 240x250x180 cm (LxWxH) • Weight: approx. 1,850 kg • With roller conveyors 2x 6 meters Robust industrial saw, ready for immediate professional use. Location: Budel, Netherlands Transport: negotiable Call or email for more information. Video available via our YouTube channel. Also take a look at our other listings. We are always looking for industrial machines throughout the year. Do you have machines available? Please email us photos and information. Kodpfxjylprlo Ab Tjln The seller is not liable for typographical or data transmission errors. The machine’s condition with respect to appearance, technology, and wear corresponds to its age; used machines are sold without warranty. The price shown is excluding VAT (unless otherwise stated).

Condition: ready for operation (used), DoAll 2013-V Vertical Bandsaw Variable saw speeds Dimensions: 160cm x 86cm x 160cm (LxWxH) Kjdpfsylpqzox Ab Toln 380V Table tilts up to 60° for mitre cuts Robust industrial saw, immediately available for professional use. Location: Budel, Netherlands Transport: possible by arrangement Price is subject to margin scheme—VAT non-deductible. Call or email for more information. Video available via our YouTube channel. Check out our other listings as well. We are always looking for industrial machines throughout the year. Do you have equipment available? Email us pictures and information. The seller accepts no liability for typing or data transfer errors. The machine's appearance, technical condition, and wear are consistent with its age. Used machines are sold without warranty. The price shown is exclusive of VAT (unless stated otherwise).

Condition: ready for operation (used), Bewo Mod 270 Semi-automatic Hydraulic Bandsaw Metal Saw #2050230 Maximum clamping: 210x210mm Dimensions: 130cm x 80cm x 140cm (LxWxH) 380v Variable cutting speed With coolant pump With extra saw blade Video available on our YouTube channel. Kjdpfx Abjylppwe Teln Location: Budel, Netherlands Transport available at additional cost Call or email for more information Also check out our other listings We are looking for industrial machines all year round. If you have surplus machines, send us an email with photos and information. The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition and wear are in line with its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: ready for operation (used), Feeding table Nordberg with Hopper ding table: 5000 x 1100 mm Dim. Hopper: 5500 x 3700 x 2500 mm Kjdpfxsi A Aqgj Ab Teln Driving: 22 kW E-motor

Year of construction: 2020, condition: excellent (used), functionality: fully functional, 1 x Multipak Packaging Machinery continuous vertical band sealer on height adjustable mobile frame. Suitable for sealing small and large pre-formed pouches weighing up to 5 kg. Model - CPS-1400. Serial number - 1154120070251. Date of manufacture - 2020. Features: - Variable speed control (up to 10 m/s or up to 60 bags/min if 100mm wide bags). - Digital temperature control - It has a range suitable for most film types and thicknesses. It also has built in cooling for thinner materials that might melt or warp at high sealing temperatures. - Adjustable sealing height - total flexibility to seal between small (100mm high) up to large (700mm high) bags. - Printing - This model has a dry-ink coding system built in allowing for up to two lines of letters and numbers to be embossed and printed within the seal area. Sealing direction - runs left to right. Kljdpoyi I Elofx Ab Ton

Condition: excellent (used), Year of construction: 2020, Macc Special 391 AV Fully Automatic Enclosed Double Column Horizontal Bandsaw Cutting Capacity: 300mm Round 300 x 320mm Section Blade Speeds 0 – 90m/min 2.2kW Spindle Motor Easy to use CNC Control Fully Automatic Coolant 415V Electrics Year 2020 Italian Built Machine Super Condition wwwjetmachinery.co.uk Jet Machinery Stock No: #79160 Machine Serial Number: 123084 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Klsdpeyi H Rgsfx Ab Ton

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Klodouzn Nnspfx Ab Ton Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Double-column Eccentric Punching Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Machine No. 88151005 Year of manufacture 1988 / 92 Press force 160 tons Column width 970 mm Column width (lateral) 560 mm Table size 900 x 900 mm Ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/minute Strip width in roller feeder max. 400 mm Motor power approx. 15 kW Power supply 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Semi-automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Switch cabinets for the press and feeder, jointly mounted on a platform next to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Press width without feeder 2100 mm Press depth with drive motor 2300 mm Overall press height 4150 mm Net weight of punching press approx. 18 tons For transport, the drive motor is disassembled and the machine is laid on its side. Included: NC Roller Feeder-Straightener ALBA Type GGVHY400 Equipment No. 1405 and 1406, Order No. 910708 (year 1992) - Feeder control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit at the press for material entry height adaptation - Hydraulic unit positioned next to the line - Straightening unit with hydraulic opening and closing Kodedzqlvopfx Ab Teln Weight of the complete system approx. 24 tons Transport space required: one megatrailer with 3-meter internal height and 13.6-meter loading length Good condition

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Ksdpfx Aew I H Rksb Toln Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Year of construction: 1968, condition: excellent (used), functionality: fully functional, STC-Ref:G-791-0181 WUPA Typ: KERMA TS-II, die cutting machine, Year: 1968 paper format: max. 624 x 890 mm equipped with: - speed: 36 strokes/min - Stroke punch for die cutting - die cutting thickness bis / up to 2,00 mm - 1.300 gr² Kjdpfx Ajxwn Nrjb Tsln - machine weight 4.500 kg - punch - German safety standard --> available: 12/2025

Condition: excellent (used), Year of construction: 2019, For sale is a very nice Lange B90KFE edge banding machine. The machine operates flawlessly and can be inspected and tested on site. Kjdpsylch Hsfx Ab Tsln Further details to follow… Shipping available.

Condition: excellent (used), Year of construction: 2010, cutting range round steel at 90°: 540 mm, Used Bomar band saw Individual 720.540 GH, semi-automatic, column-guided. Sawing diameter Ø 540 mm, can cut at an angle on one side. Vice opens to 720 mm. Year of manufacture: 2010. In really good condition. Kedpjxv Siysfx Ab Teln

Condition: used, - suitable for HARBS or similar, - d = 30 mm, - D = approx. 125 mm, - B = 50 mm, - keyway = 8 mm, - 9 pieces per set. Kljdpfx Aslf Ndaeb Tjn

Condition: good (used), Year of construction: 2000, machine/vehicle number: 1100295, functionality: fully functional, Manufacturer: BEHRINGER Model: HBP 530-1104GA Year of manufacture: 2000 Machine number: 1100295 Technical Data Working range round material: ø 530 mm Working range square at 90°: 700 x 500 mm Working range round material at 75° mitre: ø 510 mm Working range square at 75° mitre: 700 x 500 mm Working range round material at 60° mitre: ø 465 mm Working range square at 60° mitre: 465 x 500 mm Working range round material at 45° mitre: ø 300 mm Working range square at 45° mitre: 300 x 500 mm Minimum cut-off length: 35 mm Minimum material dimension: ø 30 mm / □ 20 x 20 mm Klodpfx Aoylbf Reb Tjn Remnant piece length, automatic manual: approx. 35 mm Remnant piece length, automatic: approx. 280 mm System / band tension pressure: 95 bar Coolant volume: 200 litres Cutting speed: 17 to 110 m/min Motor output – saw drive: 7.5 kW Motor output – hydraulic pump: 5.5 kW Motor output – coolant pump: 0.12 kW Connected load: approx. 14 kW Current consumption: 28 A Voltage: 400 V / 50 Hz Fuse protection: 35A Valve / control voltage: 24V DC Cable cross-section: 4 x 6 mm² Saw blade dimensions: 8800 x 54 x 1.6 mm Dimensions Length x width x height: Weight: 8,800 kg

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Ksdpfx Ajukgiqjb Toln Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2016, Technical details: Kodpfox A D Nlex Ab Teln cutting diameter: 330 mm saw band length: 4680 mm sawing motor: 4 kW cutting speed: 15 - 100 m/min square: 330 x 500 mm cutting length min.: 10 mm cutting lenght max.: 850 (-9999) mm total power requirement: 7,7 kW weight of the machine ca.: 5,5 t space requirements approx. LxWxH: 2,7 x 2,35 x 1,7 m Automatic horizontal bandsaw, hydraulic, material dimension max.: dia 330 mm, rectangular 330 mm x 500 mm, dimension of bandsaw 4680 x 34 x 1,1 mm, incl. roller track *

Condition: new, 130 kg height min. 670 mm height max. 920 mm length min. 450 mm length max. 1.300 mm Wheel width 480 mm weight ca. 36 kg Woodstar SRB 130 mobile scissor roller conveyor for flexible use in front of or behind processing machines, with a robust, height-adjustable steel frame and galvanized steel rollers. Multiple roller conveyors or roller tracks can be easily connected to each other using two hooks. Kljdpfx Abev Iztcs Ton

Condition: used, length 2.000 mm width 500 mm height 970 mm Klsdpet Iwx Rjfx Ab Tjn

Condition: used, - Spacer rings, - Distance rings, - Inner diameter: 35 mm, - Outer diameter: 50 mm, Kjdpfxjlf Ncke Ab Tsln - Groove: 10 mm, - Each set includes the following thicknesses: 40, 40, 20, 20, 10, 10, 5 mm, - Available sets: 3, - Image similar, Price per set: €35.00 + VAT.

Condition: good (used), functionality: fully functional, overall weight: 550 kg, Metal band saw Bandsaw machine Bandsaw Saw (used) Manufacturer: Bernardo Model: MBS 350 DG Cutting capacity: see photo Blade dimensions: 2925 x 0.9 x 27 mm Blade speeds: 36 / 72 m/min Total power: 2.2 kW Weight: approx. 550 kg Space requirement: L 1200 mm x W 700 mm x H 1400 mm Coolant system Kjdpfx Abeylbkmj Teln Saw pressure hydraulically steplessly adjustable Mitre device 45° / 60° Including roller conveyor with 4000 mm measuring scale and 2170 mm infeed The machine is in good condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Machine location: 48477 Hörstel

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 13000x1700x1700 mm Weight 1650 kg Total power requirement 10 kw Kledpfxov A Htwo Ab Tsn

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 13000x1700x1700 mm Ksdpfx Asv A Htqob Teln Weight 1950 kg Total power requirement 13,5 / 17,5 kW kw