Used Barrel Press for sale (12,663)

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, Njdpfsy Saurex Aiuswk load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Year of construction: 2005, operating hours: 160 h, machine/vehicle number: RS000562, Size 36 x 52 cm, CPtronic, Easyplate, Alcolor dampening system, banket wash, impression cylinder wash, segmented ink blades, Baldwin cooling and recirculation system. Nodpfx Aisztappeuewk

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Nwsdpfx Ajwzvzmjiusk

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: V040173, functionality: fully functional, Amada CNC pressbrake Model HFP 100-3 Year 2004 Capacity : 3000 mm. x 100 ton Control : 7 axis (Y1 - Y2 - X1 - X2 - Z1 - Z2 - R) Upper Tooling : 30 degrees Bottom tool : V 12 - 30 degrees Njdpfx Ajzv R D Njiuswk Excellent condition

Condition: excellent (used), 6000 x 900mm. Penumatic. 2 machines. Price each. Njdszv Rqcepfx Aiujwk Contact us for more information transportation throughout Europe can be arranged

Condition: good (used), Year of construction: 2000, Gebruikte 3,6 meter CNC-kantbank van Haco Type: ERM 36150 Capaciteit: 3600 x 150 ton BC55 CNC-besturing Bouwjaar: 2000 Nodpfx Aoztaxdjiuswk CNC-bombering Euro-gereedschapsklemming

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, 1 used press brake Manufacturer: Bystronic Type: Xpert 40/1030 Year of manufacture: 2019 Press force of 400 kN and a Njdszwxwyopfx Aiujwk bending length of 1030 mm. ByVision bending control system Control: ByVision Bending Back gauge: 6-axis Interface: OPC Oil cooling system Safety system: Fast Bend G2 Electrical: 3-phase 400V / 50 Hz Power of the main motor: 7.5 kW Made in Germany Y-axis approach speed (up to): 300 mm/s Y-axis working speed (up to): 25 mm/s Accuracy of Y-axis: 0.004 mm Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height, approx. [H]: 2449 mm

Condition: used, The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Njdpozukivjfx Aiuswk Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 840kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, controller manufacturer: Bystronic, controller model: Byvision, bending force (max.): 225 t, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, 1 Used High quality fully serviced Bystronic Xact Smart 225/4100 4metre x 225ton hydraulic downstroke cnc pressbrake for sale Nwsdpfx Ajyxqzvjiuok Xact Smart 225/4100 Make: Bystronic Model: Xact Smart 225/4100 Year / new: 2016 Total axis: 6 – 4axis back gauge X R Z1 Z2 Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 225ton Cnc control: ByVision touch screen

Condition: ready for operation (used), Year of construction: 2015, Brand: HSM Type: V-press 860 plus Year of construction: 2015 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Nwsdpfx Aiezv Rnbeuok Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feeding opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm Nedpfx Aozv Rl Tjiuewk The HSM 1160 V-Press features simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without sacrificing pressing power.

Condition: excellent (used), Year of construction: 1996, Toggle Press Schling Pressing force 60KN (6000 kg) Nodpfx Aozwkpbeiuowk Stroke adjustable from 0 to 25 mm Very clean and in very good condition

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side Nwjdpfszulxlsx Aiujk - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: used, total length: 3,800 mm, total width: 1,650 mm, total height: 2,400 mm, Colour: Green Empty weight: 3.500 kg - Details: - └ Description: The plates need to be repaired - Documentation available: No - CE certificate present: No - Main motor power [kW]: 2.2 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 450 - Total stroke [mm]: 450 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Top/bottom separately heated: Yes - Voltage [V]: 400 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1650mm x 2400mm (l x w x h) Nwedpfx Aieztc R Aeusk - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Nwodpsuhf Tzsfx Aiuek Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: excellent (used), Xerox Versant 4100 Nwsdpsychr Eofx Aiusk Including: Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) FIM (Feeder and Inserter Module) C/Z fold unit Booklet maker The machine is in perfect working order!

Year of construction: 2019, condition: used, Five identical Farmet oil presses are offered. Max. throughput: 24kg seed/h, main drive: 4kW, machine dimensions X/Y/Z: 1700mm/1620mm/1530mm, weight: 235kg. Inspection by appointment is possible. Nodpfxjzww S Aj Aiuewk

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 400 mm, table width: 1,200 mm, table length: 2,550 mm, clearance between the columns: 650 mm, total length: 1,400 mm, total width: 3,000 mm, total height: 1,930 mm, overall weight: 3,400 kg, This OTT veneer press from the Junior series, model 2512, with 6 pressure cylinders, is a classic hydraulic heated platen press for carpentry and woodworking. It has been completely overhauled by the Ott factory. 6 hydraulic pressure cylinders ensure extremely even pressure distribution over the entire surface, which is particularly important for demanding veneer work to prevent bonding errors. The use of 6 cylinders (instead of the often standard 4 cylinders for this length) minimizes the deflection of the press plates. This also allows for the pressing of smaller workpieces with high specific pressure without the plates warping. Nwedozv U Hzspfx Aiuok It is equipped with electric aluminum heating plates (gold anodized). The machine is connected and can be tested. Sale B2B without warranty/guarantee.

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net Nwsdpfx Aiofmqq Eoujk - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: used, machine/vehicle number: 008695, Max working length: 2500 mm Max working width: 1300 mm Pressure Exerted: 2 Kg/cm2 No of Pressing cylinders: 4 Nwodpfx Aisztkbpsuek

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Njdpfx Ajv Tp D Hjiuewk Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Heidelberg Autoplate with Heidelberg register system Nwsdpfx Aiszwhbbouok Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Largest sheet size: 37 x 52 cm Smallest sheet size: 10.50 x 14.50 cm Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem Nwsdpfx Aijzr Inwjuek - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. Nodpfezv Utnjx Aiuowk The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Nwsdsztvwiepfx Aiuek Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h