Used Beam Welder for sale (4,632)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: LZ202508173W, type of input current: AC, total height: 1,600 mm, total width: 600 mm, total length: 1,300 mm, input voltage: 220 V, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, sheet thickness aluminum (max.): 5 mm, product height (max.): 6 mm, space requirement height: 1,800 mm, space requirement width: 1,600 mm, space requirement length: 2,300 mm, input current: 32 A, protection type (IP code): IP54, laser power: 1,500 W, input frequency: 60 Hz, laser wavelength: 1,080 nm, wire diameter (max.): 1.8 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, Equipment: documentation/manual, type plate available, EX-DEMO TRADE SHOW 2026 UNIT WITH 40% DISCOUNT We are offering for sale, with an exceptional 40% discount on the list price, our LZ-WH 1500W fiber optic laser welding machine. This machine is in like-new condition: it has been used for only a few hours as a demonstration unit during industry trade shows throughout 2026. It is in perfect working order and ready for use. 4-IN-1 TECHNOLOGY: MAXIMUM VERSATILITY A single, compact, mobile, and plug&play system, designed to perform: -Manual laser welding: Up to 4mm on carbon steel/stainless steel and 3mm on aluminum, with or without wire feed. -Laser cleaning: Rapid removal of rust, paints, oils, and oxides. -Laser cutting: Precision cutting of sheet metal with limited thickness. -Weld bead cleaning: Aesthetic finishing and passivation of the weld bead after processing. ADVANCED SAFETY AND COMPLIANCE WITH EUROPEAN DIRECTIVES The machine has been configured to meet the most stringent European industrial safety standards. It is equipped with: Dual-channel safety interlocks to ensure redundancy and maximum reliability of the laser emission locking systems. Dedicated safety interlock switch, designed to be directly connected to a control cabinet or a protective welding curtain. This ensures that the laser cannot be activated if the perimeter barriers are not secured. Contact interlock on the ground clamp and Category 0 emergency stop button. MAIN TECHNICAL DATA Laser Source Power: 1500W (continuous wave CW) Wavelength: 1064 - 1080 nm (internal Class 4) Power Supply: 220V Single-phase, 50/60Hz Total Power Consumption: ~7 kW Cooling: Integrated 16L water chiller for continuous and intensive operation cycles and fan. Wire Feeder: Automatic and integrated into the cart. Interface: Color touch-screen with pre-set parameter library. Overall Dimensions (LxWxH): 1300 x 600 x 1600 mm Weight: 205 kg Protection Rating: IP54 INCLUDED EQUIPMENT The system is supplied complete with everything needed for production: machine body with chiller, manual laser torch with cable harness, wire feeder, ground clamp, and a comprehensive kit of consumables (replacement protective lenses and a set of copper nozzles for various functions). Bedpszw Uf Tjfx Amgjlp SALES TERMS AND LOGISTICS Condition: New machine (Ex-Demo trade show 2026). Price: 40% discount from the list price. Delivery: Ex Works (EXW) at our facility in Settimo Torinese. Shipping: Inspection and direct pick-up at our facility are possible. If transport is required, packaging and shipping costs will be calculated separately upon request from the buyer. Documentation: User and maintenance manual, and CE certification. Contact us to receive the complete technical data sheet or to view the machine in operation. OR REQUEST A QUOTE FOR A NEW MACHINE!

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Panel Rotation Station: yes Bljdpsu Rv Uqefx Amgsp

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Bsdpsmt Hhwsfx Amgelp Safety standard CE mark Total installed power 20 KW

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Bljdez Erw Hjpfx Amgjp Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: good (used), Year of construction: 2016, Offer 25429 Blodpfx Aeygr Edjmgop Technical data: - Load capacity: 1 t - Centrally positioned crane lifting eye - Hook-in height approx. 500 mm - 2 adjustable lifting eyes, adjustable from 1000 to 2500 mm - Adjustable spacing: 150 mm - Beam cross-section: W 100 x H 100 mm - Overall dimensions approx.: L 2650 x W 170 x H 500 mm - Weight approx.: 70 kg

Condition: used, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Year of manufacture: 2014 Colour: Grey Empty weight: 6.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Bumper guard, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 300 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - Table length [mm]: 5200 - Table width [mm]: 1300 - Working range X [mm]: 6350 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 7033 - Y-axis maximum stroke [mm]: 1940 - Z-axis maximum stroke [mm]: 475 - Voltage [V]: 400 - Current consumption [A]: 64 - Installed length [mm]: 11000 - Installed width [mm]: 3900 - Installed height [mm]: 3000 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bedpfx Amj Af Uu Usgolp Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2015, PRATTO mesh welding line ( 3D mesh production line ) Technical data for the machine • 2 stands for feeding the cross and line wire • Wire diameter between 3 ÷ 4.2 mm • Fence dimensions between 1.2 to 2.5 m (example 1.2 x 2m, 1.5x2.5 m, 2.5 x 2.5 m) • Programable machine with CNC, where all the programs are stored • Power drive (including hydraulics + cooler) • Electric servo-motor driving system for fence transportation • Automatic stacking of fences (max. 50 pcs) • Working speed up to 120 strokes/min (1 fence in 30 sec- depending of the dimension of the Bedpfx Amozq Ez Sogjlp fence

Condition: used, functionality: fully functional, machine/vehicle number: 001640U, For sale Used SWF single girder overhead crane approx. 14,000 mm x 5,000 kg. We can optionally deliver the cranes including: * Modification of span length * Installation and inspection * Power supply rails * Radio remote control Jan Reiling B.V. also supplies new custom-made cranes at very competitive prices: * Overhead travelling cranes * Suspension cranes * Jib cranes * KBK systems * Boat hoists Bodpfjyglfwex Amgelp All our new and used cranes delivered (within NL and BE) come with warranty! We also have an own stock of approximately 15,000 Demag spare parts. For more information, please visit the Jan Reiling B.V. website. Keywords: Cranes, crane, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, krane, hallenkrane, brückenkrane, bruckenkrane, werkstattkrane, lagerkrane, hebezeuge, cranes, universal crane, hoist, bovenloopkraan, laufkrane, overhead crane.

Condition: used, Trolley Beam Punching Machine / Trolley Beam Punch Sandt Type 530 - Used Machine Blodpfx Amex Sdzpogop Punching force: 30 tons Table size: 1600x500 mm Trolley size: 500x500 mm Used, overhauled machine

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6 Bljdpfxewuucio Amgop

Condition: used, Gulmay CP225-1/29 X-Ray Device – Radiographic Irradiation Unit Maximum Power: 3200 W kV Range: 20 – 225 kV kV Accuracy: ± 1% of set value kV Reproducibility: Better than ± 0.05 kV High Voltage Ripple: Less than 5.0 V/mA with 10M high-voltage cable mA Range: 0 – 30 mA mA Accuracy: ± 0.5% of set value mA Reproducibility: Better than 2 μA Input Voltage: 220 V ±10% 47 – 63 Hz Input Current: 27 A at 220 V Output Connector: R30 Cathode Dimensions (W x H x D): 435 x 780 x 818 mm Storage Temperature: -40°C to +70°C Operating Temperature: 0°C to +40°C Bjdpfx Aoy Akczsmgelp Relative Humidity: 95% Duty Cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an appointment for viewing. We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is available. Sale subject to prior sale. Visit our shop and see our other offerings. The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications or errors in the item description may occur and are subject to change.

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment Blsdpfx As Ahi Trsmgjp - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: D34L/8520, Offer Number: D34L/8520 Machinetype: mesh welder Make: SCHLATTER Type: MG900 Constr. year: 1998 wire diameter - automatic: 3,0-8,0 mm working width: 1200 mm working range: 3500 mm Bodpfxsz At N Uo Amgslp line wire distance: min 50 mm distance of cross wire: min 50 mm output strokes/min: 80-110 Number of welding heads: 8 Location: In our warehouse

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Blodpjzugnzjfx Amgsp Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: used, functionality: fully functional, The Terumo SCD IIB Sterile Tubing Welder, P/N 72508 provides reliable, high-quality welds for sterile tubing connections, completes a weld cycle in 30 seconds, is compact and portable, requires minimal technical training and can be implemented seamlessly into existing processes. Tubing requirements: Polyvinyl chloride (PVC) tubing with a nominal outer diameter of 5.46 mm (0.215 inch) and a wall thickness of 0.84 mm (0.033 inch) or C-Flex tubing with a nominal outer diameter of 6.35 mm (0.25 inch and a nominal inner diameter of 3.18 mm (0.125 inch). Bodpfjuyu N Esx Amgelp Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately. Bedpfx Aozkb T Domgolp

Condition: used, Beams for wide-span racking Bledsyinuyspfx Amgep Manufacturer: Mecalux Model: ZE-55 Length: 1900 mm Stock: 60 units Matching shelves are also available.

Year of construction: 2013, condition: excellent (used), From liquidation of business assets: Kjellberg TIG 321 AC/DC Year of manufacture: 2013 Pulsed operation HF ignition Water cooling Welding range: 5-320 Amps 320 Amps at 45% duty cycle Complete, with 4-meter torch, ground cable, and pressure regulator Dimensions in mm, approximately: 1100x510x810 --Very well-maintained unit-- Bsdpfx Amshp U Rmjgolp

Condition: used, Year of construction: 2013, We are offering for sale a two-head Elumatec ZS 720/00 LV welding machine, manufactured in 2005, designed for welding PVC profiles for the production of windows, doors, and frames. The two-head configuration allows for the simultaneous welding of two corners of the frame, ensuring precise processing and good productivity. The machine is characterized by its robust Elumatec construction and is suitable for professional use in companies that manufacture PVC window and door frames. Technical specifications: Manufacturer: Elumatec Model: ZS 720/00 LV Year of manufacture: 2005 Type: two-head welding machine Application: welding of PVC profiles Electrical supply: 3/N/PE – 380/400 V Frequency: 50/60 Hz Blsdpfxozmhuae Amgsp Installed power: 5.2 kW Operating pressure: 7 bar CE marking Made in Germany The machine is used and is available at our location in Termini Imerese, Palermo. It can be viewed by appointment. Additional photographs, technical information, and videos can be provided upon request.

Year of construction: 1991, condition: ready for operation (used), These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible. Bljdpew Tl Irofx Amgsp

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Blsdpfx Ajumpq Nomgep Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Condition: good (used), functionality: fully functional, Year of construction: 2008, The machine is powered on and can be inspected at any time. TRUMPF TruLaser Tube 7000 (T02) X working area max.: 6500mm Y working area max.: 320mm Control system: SINUMERIK 840D Standard equipment: Machine - Rotating and feed station with self-centering clamping jaws - Tube support for raw material with automatically retractable tube supports - Feed chuck with self-centering parallel clamping rollers - High-precision drives - Unloading station with brush table, finished part lengths up to 3000mm - Tube support for finished parts with extendable guide rollers - Enclosed beam guidance - NitroLine - SprintLine - Laser power control - Programmable cutting gas pressure - Automatic shutdown - Work area lighting - X-axis table movement, pneumatic - FocusLine - More powerful compact dust extractor - Max. outer diameter 200mm - Max. raw material length 6500mm - Min. raw material length 2500mm TRUMPF Laser - CO2 laser TruFlow 2000 - High-frequency excitation - Maintenance-free turbo radial blower - Laser control TASC 3 - Laser logbook function - Cooling unit Cutting head - Laser cutting head with 155 mm (6") lens - Cutting head quick-change device - ControlLine Blsdpfx Ams Ahi Tgegop Control system - Easy operation with touchscreen - Diagnostic functions - Integrated technology data Data transfer - RJ45 network connection and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and coolant - Compact dust extraction system - Protective cabin with Makrolon panels + TruFlow 3600 + Unloading at the front and rear + SeamLine Tube + Teleservice via modem instead of via the internet Automation LoadMaster Tube 6m + LoadMaster Tube 6m with bundle support, 2 gripper options LoadMaster Tube 6m + Scratch protection arms, bundle support LoadMaster Tube 6m + Swiveling conveyor belt LoadMaster Tube 6m

Condition: excellent (used), Year of construction: 2013, PRATTO equipment for zinc coated welded meshes Technical data for the machine : STARWELD PE is a high-performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets • 2 pay-off for feeding the cross wire • 36 pay-off for feeding the line wire • Fence dimensions between 1 and 3 m (2 types can be made simultaneous, example 1 m with 2 m, 1.5 m with 1.5 m, 1.2 m with 1.8 m) • Range of wire diameter 1.2 – 3 mm Blodpfeyxn Rnsx Amgop • Working speed (strokes/min) Up to 130 • Automatic stacking of rolls • ⁠PLC management

Condition: used, functionality: fully functional, machine/vehicle number: 001652U, load capacity: 6,300 kg, For sale Bljdjzik Rcspfx Amgjp Used Demag single-girder overhead crane, approximately 17,500 mm span x 6,300 kg capacity. Ref. 001652U * Stored indoors * Technically 100% sound and inspected All our new and used cranes, which we supply assembled, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and, if desired, repainting * Power rail / conductor bar * Radio remote control * Tandem control * Assembly and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane, overhead crane. Single-girder crane, single girder. Chain hoist, chain hoists.

Condition: good (used), Year of construction: 2002, punching pressure 55.0 t punch diameter 20 in 20 mm punch diameter 40 in 10 mm adjustment of stroke 0 - 60.0 mm round bar steel 40.0 mm L-beam 120 x 12.0 mm square edge steel 40.0 mm shear: flat material 200 x 20 / 300 x 15 mm blade length 317 mm strokes per minute max. 25 work height max. 900 / 1130 mm oil volume 75.0 l voltage 400 V total power requirement 5.5 kW weight 1250 kg dimensions 1650 x 1100 x 1900 mm From a maintenance workshop Original price of the base machine: ~ 15.000 Euros Special price upon request Equipment: - Electro-hydraulic structural steel shear - Punching station, flat bar shear, angle/profile steel shear, notching station * Punching station equipped with special punching attachments - Heavy-duty, robust welded construction - Infinitely adjustable stroke length - Highly compact design - Support table at the notching station - Side support tables - 2x mobile foot switches - Emergency stop button Bjdpfx Aj Ahkkajmgelp - Operating manual (PDF)