Used Continuous Beam Facility for sale (12,211)

Year of construction: 1996, condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Used Complete System – Fully Operational – Inspection Possible During Production For sale is a complete and fully operational STEIMEL chip conveying and de-oiling system, which is currently still in use in serial production. The system has been used exclusively for conveying and de-oiling brass chips and is being sold solely due to the modernization of our production facilities. It is a continuous centrifugal de-oiling system. A major advantage for prospective buyers is that the system can be inspected while in operation before dismantling. Technical drawings and documentation are available. Dismantling is scheduled for October 2026. This system is ideally suited for companies in the machining and metalworking industry looking for a reliable and cost-effective solution for chip handling and the recovery of oil and coolant. Technical Data Manufacturer: STEIMEL Fgjdezhui Hspfx Al Ush Type: Continuous Centrifugal System, Type K50 Operating Principle: Centrifugal separation Year of Manufacture: 1996 Condition: Used, fully operational. The centrifuge drum (main component) was completely overhauled and has been back in operation since June 2026. Availability: Expected from October 2026 Location: 73630 Remshalden, Germany Processed Material: Brass chips (leaded and lead-free) Performance Capacity: 2,000 kg of de-oiled chips per 24-hour operation Residual moisture achieved: between 1.8% and 4%, depending on the chip type Residual moisture can be adjusted by: * centrifuge drum speed, or * chip elevator conveying speed * Simultaneous loading of up to 8 chip carts * Chip bunker capacity: approx. 800 litres Scope of Supply * Complete chip conveying system including centrifugal de-oiling unit * Oil reservoir not included * Technical drawings and documentation included * EXW (Ex Works), loaded and ready for collection at our loading dock Key Features * System is currently still in production use * Inspection under real production conditions possible by appointment * Robust industrial design * Proven STEIMEL quality * Sale of the complete system preferred The system has been regularly maintained and remains fully operational until dismantling. Interested buyers are welcome to inspect the equipment on site and verify its performance and condition. Additional photos, technical documentation, and engineering drawings are available upon request.

Condition: like new (used), functionality: fully functional, total width: 15,000 mm, total length: 240,000 mm, total height: 9,000 mm, Model: Saxon 5 Fjdpfx Aloz H T Dwj Ujgh Manufacturer: Fischbein Machine type: Continuous hot‑air bag sealer Power: 220V single‑phase, 66 A Typical use: Sealing pillow‑style heat‑sealable plastic bags in fast‑paced production lines

Condition: excellent (used), The PANHANS ECOPAN is a used panel saw with PC control and optimization. It features a scoring saw, automatic cut length detection, a side pressing device, and a label printer. Air cushion tables and sliding tables support material handling. The feed rate of the saw carriage is continuously adjustable. Equipment: PC control with optimization Scoring saw Automatic cut length detection Side pressing device Air cushion tables Sliding tables Continuously adjustable feed rate of the saw carriage Label printer Technical data: Cut length: 4,200 mm Cut width: 4,200 mm Max. cut height: 72 mm Number of clamping devices: 6 Feed rate of the saw unit max.: 100 m/min Feed rate of the width fence max.: 80 m/min Motor power main saw: 11 kW Motor power scoring saw: 1.5 kW Saw blade main saw Ø: 300 x 30 mm Saw blade scoring saw Ø: 180 x 30 mm Extraction port Ø bottom: 140 mm Extraction port Ø on the pressure beam: 3 x 100 mm Volume flow: 5,000 m³/h Compressed air connection: 6 bar Air consumption: 140 l/min Rated current: 38 A Fsdpfjyrqrtox Al Uegh Max. fuse rating: 50 A Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire Fodpfozlpahsx Al Ujgh - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: good (used), OK Supersealer Continuous Bag Sealer Fodpfx Alezbnnks Uogh Fully stainless steel Complete with stainless steel belt conveyor Adjustable temperature control Stop start controls, E stop Height adjustable sealing head Mobile on castors and lockable feet The best bag sealer on the market Price € 9,500

Condition: new, Year of construction: 2026, CORMAK HBS421 Wood Band Saw Main Advantages – Why Choose the HBS421 Wood Band Saw High stability of the cutting system – reduced vibration levels ensure cleaner cuts and extend blade life. Large cutting capacity – comfortable operation with larger workpieces such as panels, beams, and structural wooden elements. Precision work table – provides reliable support for the workpiece and maintains accurate cutting angles during operation. Controlled blade tensioning system – stable blade guidance improves cutting straightness and minimizes blade drift. Adjustable blade speed – allows optimization according to wood species, material thickness, and cutting type (rip cutting or cross cutting). Efficient dust extraction solutions – the extraction outlets allow easy connection to professional dust collection systems. Construction and Technology – Detailed Technical Description The CORMAK HBS421 wood band saw features a vertical design, providing convenient material handling on the work table and allowing both straight and curved cuts. In professional woodworking applications, structural rigidity is essential; therefore, the machine body and main supporting components are designed to maintain wheel alignment and ensure smooth, precise blade movement. Drive Wheels and Blade Guidance System In professional band saws, cutting quality largely depends on the accuracy of the blade guidance system. Properly designed drive wheels ensure correct blade operation along its entire length, reducing slipping and limiting local overloads. This results in: lower vibration levels during higher feed rates, improved edge quality, especially when cutting hardwood species, extended blade service life thanks to stable operation and correct tensioning. Work Table and Angle Adjustment The work table provides stable support for the material and ensures repeatable cutting results. In the CORMAK HBS421 wood band saw, both table rigidity and adjustment capabilities are important features, allowing precise angled cuts. This solution is particularly valued in woodworking facilities where quick transitions between different operations are required, including: material sizing, preparation of structural components, precision trimming operations. Drive System and Continuous Operation The band saw drive system is designed for demanding working conditions, while the three-phase power supply ensures smooth operation and stable torque delivery. As a result, the vertical wood band saw maintains consistent cutting performance even when processing thicker materials, which is essential in production environments. The adjustable blade speed allows operators to optimize machine performance for specific tasks, reducing the risk of edge burning and improving control over the cutting process. Standard Equipment High-voltage release safety switch Dust extraction outlets 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Technical Specifications Parameter Specification Wheel diameter 480 mm Maximum cutting height 240 mm Maximum cutting width 405 mm Blade width range 9.5 – 38.1 mm Blade length 3345 mm Blade speed 7 / 14 m/s Table tilt range 0° to +45° Table dimensions 535 × 435 mm Fjdpfxoyk Apnj Al Ujgh Overall dimensions 830 × 550 × 2070 mm Weight 160 kg Motor power S1 – 2.2 kW / S6 – 3.1 kW Power supply 3-phase, 400 V Operating manual (DTR) Included CE declaration Yes

Condition: new, functionality: fully functional, Year of construction: 2026, Beam extensions for gantry cranes – increase the reach of your crane Beam extensions are professional accessories for gantry cranes that allow you to increase the working width of the structure. They are used wherever the standard crane width is insufficient – particularly in wide production halls, warehouses and industrial facilities. Manufactured from durable and resistant materials, they ensure reliability and long service life even in intensive working environments. Greater functionality and safety The extensions allow for easy adaptation of the crane to individual requirements, expanding its range of applications without the need to purchase a larger model. The maximum lifting capacity of the crane with extensions is 800 kg. However, it should be noted that when the extension exceeds 200 mm, the load capacity is further reduced. For this reason, it is essential to follow the manufacturer’s guidelines and carry out regular technical inspections of all crane components, including the extensions. Key product features: Enable quick and safe increase of the crane’s working width Simple installation – the set includes two extensions ready for mounting Robust construction – high-strength steel profiles Operational safety – compliant with industrial standards and health and safety requirements Compatible with CORMAK gantry cranes and other structurally compatible models Fjdpfjycqh Nox Al Uogh Usage guidelines: Gantry crane extensions should be used in accordance with the manufacturer’s recommendations, particularly with regard to the reduction in load capacity after installation. The minimum extension width is 200 mm, and each additional increase results in a further reduction of the maximum lifting capacity. Regular technical inspections and proper maintenance are essential to ensure full operational safety. Applications of beam extensions The product is ideally suited for industries such as logistics, industrial manufacturing, steel structure assembly, the automotive industry and others. Versatility, durability and build quality make it an excellent choice for companies that expect flexibility and reliability from their equipment. By choosing CORMAK beam extensions, you invest in efficiency, functionality and safety. Extend the capabilities of your gantry crane and adapt it to changing production or warehouse requirements! Technical parameters: Length 520 mm Width 131 mm Height 70 mm Number of pieces per set 2 Set weight 20 kg

Condition: used, OK Supersealer Continuous Bag Sealer Stainless steel Fgedpfjzcff Aex Al Ujh Adjustable height Adjustable temperature control for different gauge bags Mobile on castors Bag infeed from right to left The best bag sealer on the market Price € 4,950

Condition: used, OK Continuous Bag Sealer Stainless steel Adjustable temperature control for different bag gauges / micron Adjustable height mast Mobile on castors Price € 4,950 Fodpfxozcg R Tj Al Usgh

Year of construction: 2012, condition: used, Three-story, modular container system manufactured by PLATAL Mobilsysteme GmbH in 2012, previously used as a school building with classrooms, ancillary rooms, and sanitary facilities. Manufacturer: PLATAL Mobilsysteme GmbH Year of manufacture: 2012 Fgodpfx Ajz N Ex Tjl Ueh Construction: Modular container system Previous use: School and sanitary facilities Overall dimensions (L × W × H): approx. 36,000 × 15,760 × 10,200 mm Floors: 3, identical in construction Total number of container modules: 72 units Container module type 1: 36 units, each 3,000 × 6,500 mm Container module type 2: 36 units, each 3,000 × 9,260 mm Module height: 3,400 mm Sanitary areas: 3, one per floor Exterior staircases: 2 steel exterior staircases with grating steps and landings Equipment: Windows with exterior roller blinds, radiators, suspended grid ceilings, lighting, electrical installations, and sanitary areas Room layout: Classrooms, corridors, ancillary rooms, and sanitary areas

Condition: new, Year of construction: 2026, CW-3000 Water Chiller for CO₂ Laser Engravers and Cutting Plotters The CW-3000 is a compact water cooling system designed for CO₂ laser engravers and cutting plotters, suitable for laser tubes with a power rating of approximately up to 80 W. It maintains a stable coolant temperature, protecting the laser source against overheating and power fluctuations. It is a simple and effective solution for achieving consistent cutting and engraving quality while reducing the risk of production downtime. The unit uses an efficient fan and heat exchanger system, making it lightweight, space-saving, and easy to integrate into existing cooling installations. Why CW-3000 improves process safety and quality Protection of laser components – stable cooling reduces temperature fluctuations inside the laser tube and minimizes the risk of thermal overload of the entire system (tube, power supply, connectors, and water circulation circuit). This ensures safer and more predictable operation. Extended CO₂ laser tube lifespan – maintaining the recommended operating temperature range helps preserve output parameters for longer and delays the need for tube replacement. Improved cutting and engraving quality – stable temperature means stable laser beam power, helping achieve consistent results, cleaner edges, and fewer corrections. Continuous production operation – reduced risk of thermal alarms and cooling-related interruptions ensures a more predictable workflow. Cost-effective operation – simple construction, compact dimensions, and low power consumption make daily operation easier and help reduce maintenance costs. Applications The CW-3000 cooling system is designed for: Fgsdpfoy Sg H Iex Al Uoh CO₂ laser plotters and engravers used in light and medium-duty applications where repeatable quality and low operating costs are important. Advertising workshops, prototyping studios, and small production facilities where reliable cooling is required with limited installation space. Recommended operating practices Use clean coolant and regularly check the fluid level; ensure the circulation system remains unobstructed and all connections are leak-free. Provide sufficient airflow around the heat exchanger and cooling fan. Periodically clean the filter and reservoir and check the coolant flow to maintain efficiency and protect system components. Technical specifications Parameter Value Power supply 230 V Current consumption 0.45 A Cooling capacity 50 W/°C Tank capacity 9 L Connections (inlet / outlet) 10 mm Maximum operating height 10 m Maximum flow rate 10 L/min Weight 9.5 kg Dimensions (L × W × H) 49 × 27 × 38 cm

Condition: excellent (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Fgjdpfjzcrlcex Al Ujh Electric adjustable mast height Mobile on castors Excellent condition

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Fodpfoz N Ahxox Al Uegh Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left. Fgjdpfozudu Sex Al Ujh

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, We offer a continuous jet dyeing machine with a roller track – GIETART GW 1500-415. Manufactured in 2005. Number of turbines: 4. Power consumption per turbine: 11 kW. Width of the dyeing chamber: 1500 mm. Height of the dyeing chamber: 415 mm. Roller tracks with electric drive: 11.5 m + 11.5 m. Sweeping brush: 1500 mm. Total power consumption of the machine: 65 kW. Complete documentation, including electrical diagrams, is included with the machine. Fgjdpfsz Ebtkox Al Ush

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €49,900 net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION Fsdpfjzzdyzjx Al Usgh • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €64,000 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of cooling: water, degree of automation: automatic, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fridge, fume extraction, safety light barrier, We offer this ready for use Highcon BEAM 2 laser cutting machine, year of construction 2020. Fsdpfxey Dq E So Al Usgh IN production, can be inspected on site. The price includes the chiller as well. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), 584 USED Continuous roll proofer KÖNIG. Proofer (excluding the roll production line) connected to a tunnel oven. Fjdpfjz Riuusx Al Ujgh EXTERNAL DIMENSIONS (in cm): - W: 450 - L: 540 + 400 (overhead conveyor to the oven) - H: 520 TECHNICAL DATA: - power supply: 3x400V+N, 50Hz - power: 5 kW - capacity: max. 18,000 pcs/h The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Fgedpfx Alewuucie Ueh Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: good (used), Year of construction: 2001, I sell the panel beam saw BIESSE SELCO EB70. Year 2001. Cutting size 3200x3100mm. Fsdpoz Ii Arofx Al Uegh Cutting height 55mm. Main motor 7,5kW Scoring motor 2,2kW Total area covered W.5422mm x D.6488mm Gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, - Used continuous processing system (belt grinder) - The processing trough needs to be replaced. Fedpfx Aljzqunzo Uegh

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. Fodpfszzpb Rsx Al Uegh System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: excellent (used), Year of construction: 2004, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80 m Continuous washing systems from the manufacturer Hinst are designed to process high volumes of parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets with dimensions of 48.5 x 48.5 cm) on a transport system. An integrated roller conveyor or a slat belt automatically transports the parts into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they sequentially pass through different, separate treatment zones: * Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray manifold) to remove oils, greases, and chips. * Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. * Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts come out at the other end of the machine completely dry and clean. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater is cleaned via filter systems (to capture chips and dirt) and oil separators and then pumped directly back into the circuit to conserve resources. This tunnel design (the system measures an impressive 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture 12.2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m incl. - 6 baskets: basket dimensions: 48.5 x 48.5 x H 26 cm - Roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. Fsdpog Ipp Aofx Al Ujgh You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2007, functionality: fully functional, load capacity per storage section: 11,500 kg, total length: 390,000 mm, total height: 7,000 mm, total width: 1,000 mm, shelf height: 7,000 mm, support length: 2,700 mm, shelf length: 51,300 mm, load capacity: 1,000 kg, load capacity per stand: 11,500 kg, frame height: 7,000 mm, load per truss pair (max.): 3,000 kg, frame width: 85 mm, axle spacing: 2,700 mm, mesh size: 2,700 mm, number of shelf rows: 7, pallet spaces: 1,845 euro pallets, construction width: 27,003,600 mm, For sale is a comprehensive used pallet racking system, predominantly from STOW, with additional sections from Link 51 and Allclick. The system has already been completely disassembled, sorted, and is ready for loading at any time. Negotiable price: €32,000 net The offer includes: STOW 95 pcs. frames, height 7,000 mm, depth 1,000 mm 720 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet STOW 20 pcs. frames, height 7,500 mm, depth 1,000 mm 114 pcs. beams, length 3,600 mm Load capacity approx. 1,000 kg per pallet LINK 51 17 pcs. frames, height 7,500 mm, depth 1,000 mm 120 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet ALLCLICK 8 pcs. frames, height 7,200 mm, depth approx. 1,000 mm 95 pcs. beams, length 3,600 mm Load capacity approx. 640 kg per pallet Total: 140 pcs. racking frames 1,049 pcs. beams Also available: Back panel mesh covering an entire row of racking approx. 51,300 mm length × 7,000 mm height Fgodpfx Alszugtds Ueh Impact protection various racking accessories The entire system was documented with photos, videos, and drone footage before disassembly. The racking system has already been completely dismantled and can be loaded or picked up at any time. Inspection and loading are possible by arrangement. Partial sale or sale of individual systems or larger sub-sets is possible by agreement.

Condition: used, Year of construction: 2003, machine/vehicle number: 7190, functionality: fully functional, power: 333 kW (452.75 HP), input voltage: 400 V, input current: 70 A, type of input current: three-phase, temperature: 920 °C, total length: 10,700 mm, total width: 4,250 mm, control type: PLC-controlled, fuel type: gas, Equipment: CE marking, documentation/manual, We offer this used CIEFFE FORNI INDUSTRIALI S.P.A. continuous roller oven, model FORNO CONTINUO A RULLI, manufactured in 2003. Serial number: 7190 Year of manufacture: 2003 Heating type: Gas Total power: 48 kVA Rated voltage: 3 x 400 V Fjdpfszq Eblox Al Uogh Rated current: 70 A Gas heating power: 333 kW Line protection: 63 A Power supply line protection: 40 A Control voltage: 230 AC V Control voltage: 24 DC V Maximum temperature: 920 °C If you have any questions or require further information, please do not hesitate to send us a message or call us.