Used Bearing Resolution for sale (3,831)

Condition: used, KRÜSS Type: FP8400 Remarks: (Year of manufacture 2019) The device has never been put into operation, is in new condition, and is still in its original packaging. Description: The flame photometers from A.KRÜSS are used to determine the concentration of alkali and alkaline earth elements in aqueous solutions. The devices are a simple and particularly cost-effective alternative to analytical techniques such as ICP or AAS. Flame photometers are particularly suitable for the quantitative determination of alkali metals such as sodium (Na), potassium (K), and lithium (Li), and alkaline earth metals such as calcium (Ca). The measurement is carried out simultaneously for these elements in a single step. Through consistent modernization of the flame photometers and a special focus on safety concepts, completely new application areas are opening up for many cost-sensitive customer groups – from automated incoming goods inspection to the qualification of FFP masks according to DIN 149. Low operating costs are one of the main strengths of AES; in addition, the technology of the FP8000 series scores points with its high determination accuracy. Measuring food samples Determining the quality of high-purity glasses and vials for pharmaceutical packaging Concrete classification, analysis of infusion solutions. Flame photometer, laboratory version with manual sample feed, 4 measuring channels, measuring methods freely configurable, additional channel for flame monitoring. Hfodpfx Aoziap Ijn Eep Measuring ranges for undiluted samples: 0.01 mg/l to 4500 mg/l sodium 0.01 mg/l to 4500 mg/l potassium 0.01 mg/l to 4500 mg/l lithium 0.50 mg/l to 4500 mg/l calcium Resolution: 0.001 mg/l for all elements Accuracy: +/-1% with corresponding quality of standards Precision:

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers Hedpezdnnuofx An Esfp The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: used, Kortho Graphicjet X-18 Inkjet Printer High-resolution inkjet printer for absorbent and smooth surfaces The most advanced Hi-Res inkjet printer for prints up to 18mm high The X-Series Graphicjets, introduced in 2015, are Kortho's newest and most advanced Hi-Res inkjet printers. From a mechanical engineering perspective, the X-Series printers, with their capillary ink system, represent an evolution of our proven 18P model. However, the X-Series printers feature a Windows operating system. Furthermore, its NiceLabel Windows driver enables this printer to print directly from any Windows software or ERP system. The X-Series features an 8" color touchscreen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. In addition, this printer can print at a speed of up to 60 meters per minute, up to 120 m/min at lower resolution. Features of the Kortho Graphicjet X-18 Inkjet Printing area of 18 x 1000 mm Resolution of 185 DPI Printing speed of up to 60 meters per minute (at full resolution), up to 120 m/min at lower resolution Hsdpfx Aotpwt Ijn Eofp Prints on cardboard (boxes), paper, and many other absorbent materials A compact printhead housing and 60 cm supply cable ensure easy installation Its non-contact capillary ink system ensures that this printer is not affected by changing environmental conditions Oil-based inks and mineral oil-free inks available User-friendly 20 cm TFT touchscreen in any language you desire Starts within seconds Extensive graphics, text, and barcode functions Windows-based operating system Equipped with a Windows driver for network integration Equipped with an Ethernet port as well as USB ports 100% NiceLabel compatible On-screen label design and management software (no external device required) Low running costs and low maintenance Longest service life and reliability on the market Made from the best materials (such as stainless steel) Serialization option via variable printing and bidirectional communication with ERP systems CE certified More items in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: used, Nikon Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: Hodpoyiy Hbofx An Eofp 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Osai Neomark 400 Nd-YAG Laser Marking Machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various card types up to a side length of 320 mm. Hedjxbck Eopfx An Eofp The user interface consists of a console with a separate keyboard for controlling the laser source, the control systems, the marking systems, and the automation responsible for card movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to collect the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2 % Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling renewed More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Hsdpfx Aszizrken Eefp Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2015, operating hours: 1,863 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, spindle speed (min.): 1,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 4,800 kg, center height: 210 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 10 m/min, travel distance X-axis: 470 mm, travel distance Y-axis: 390 mm, travel distance Z-axis: 325 mm, grinding spindle motor power: 10,000 W, table length: 1,000 mm, table width: 275 mm, input current: 63 A, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Norma NGC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: FANUC 31i Software installed: Quinto 5 Colour touchscreen: Yes Number of axes: 5 Height of centers: 210 Stroke X axis: 470 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.000025 [mm] Stroke Y axis: 390 [mm] Max. Stroke speed Y axis: 20000 [mm/min] Resolution Y axis: 0.000025 [mm] Stroke Z axis: 325 [mm] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.000025 [mm] Table length: 1000 [mm] Table width: 275 [mm] Grinding spindle attachment: HSK 50 Min. grinding wheel speed: 1000 [rpm] Max. grinding wheel speed: 12000 [rpm] Grinding spindle motor power: 10 [kW] Max. diameter grinding wheel: 250 [mm] Min. diameter grinding wheel: 40 [mm] Internal workpiece spindle nose: ISO 50 Number of running hours: 1863 [h] Supply voltage: 400 [V] Rated current: 63 [A] Weight: 4800 [Kg] Hfjdpfx Aj Akdc Den Ejp More information upon request.

Condition: used, Angle sealing machine with shrink tunnel For sale is a professional, semi-automatic angle sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. It is ideal for quickly and professionally shrink-wrapping cardboard boxes, books, bottles, textiles, or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The angle sealer works with a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculation system with adjustable air deflectors. This ensures a completely even heat distribution and a perfectly smooth shrinking result – even with demanding product geometries. Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar, and tunnel temperature to be adjusted precisely to the film thickness used (PO, PE, or PVC). Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid conveyor belt. It reliably transports even heavy packaged goods (e.g., printed materials, canned goods, or wooden parts). Ergonomic infeed table: The separate, mobile preparation table allows for quick and easy threading of products into the half-tube film. The film unwinding is smooth and easy thanks to the ball-bearing system. Perfectly suited for printing companies, logistics centers, laundries, or contract packers for shrink-wrapping: - Cardboard boxes and multi-packs - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle carriers and cans Technical data & features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Angle sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid conveyor belt in the shrink tunnel Mains voltage: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design, in the tunnel opening) Hfodpfoz Dtf Aex An Eop Net weight: approx. 400 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, 3D SYSTEMS Professional MultiJet 3D Printer / MJP System 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD print modes For sale is a used, professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for producing precise plastic components, functional prototypes, concept models, as well as fixtures and tooling applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Print modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD resolution: 800 × 900 × 790 DPI Layer thickness HD: 32 µm UHD resolution: 1600 × 900 × 790 DPI Layer thickness UHD: 32 µm Dimensions (W × D × H): 1120 × 740 × 1070 mm Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet / USB Equipment: Hfjdpfx Asz Erdasn Esp Integrated touch display Material system for build and support material Automatic switching of material cartridges Network connection USB connection 3D Sprint software support Material containers as shown in the pictures Application areas: Functional prototypes Concept models Form and fit testing Fixtures and holders Tooling applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Additional accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Shipping via freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 100 kg, grinding diameter: 300 mm, type of input current: three-phase, spindle speed (max.): 2,450 rpm, spindle speed (min.): 1,000 rpm, feed length X-axis: 260 mm, feed length Z-axis: 750 mm, grinding spindle motor power: 5,500 W, overall weight: 5,500 kg, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 12 m/min, input voltage: 400 V, CNC Cylindrical grinding machine JONES AND SHIPMAN Surprema 650 M EASY TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: GE FANUC Quick Panel Hsdpfx As Akcf Dsn Eofp Centre distance: 650 [mm] Max. grinding diameter: 300 [mm] Stroke X axis: 260 [mm] Max. Stroke speed X axis: 6000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 750 [mm] Max. Stroke speed Z axis: 12000 [mm/min] Resolution Z axis: 0.0001 [mm] Min. grinding wheel speed: 1000 [rpm] Max. grinding wheel speed: 2450 [rpm] Grinding spindle motor power: 5.5 [kW] B axis swivelling stroke: 190° / 45 [°] B axis indexing precision: 0.02 [°] Internal workpiece spindle nose: Morse 5 Workpiece spindle max. speed: 660 [rpm] Workpiece swiveling range: 15 [°] / 90 [°] Workpiece spindle power: 1.2 [kW] Type of attachment tailstock: Morse 3 Tailstock quill stroke: 30 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: Ø +/- 0.05 [mm] Max. load between centers: 100 [Kg] Supply voltage: 400 [V] Weight: 5500 [Kg] More information upon request.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. Hsdpo Akb T Ssfx An Esfp - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Hedpfx Ano Ain Iwe Eefp Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and visual condition. The machine has undergone a comprehensive and professional overhaul in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional inspection were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced. In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition. Hfsdjyrqpfjpfx An Eop The generator and the control system were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideally suited for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Working tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 09.11

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Hodpfx Ajvvkipen Esfp

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Hedsu Eb Nijpfx An Ejfp Bear weight 630kp Top pressure - filling pressure 5 bar

Condition: new, Year of construction: 2021, ABB M3GP 355SMB 2 – 315 kW ATEX Three-Phase Electric Motor Industrial ABB three-phase electric motor rated at 315 kW for continuous operation. This foot-mounted motor features a side-mounted terminal box, a finned housing, and a shaft extension with protective wrapping. The nameplate indicates the ATEX marking II 3G Ex ec IIC T3 Gc. Technical specifications • Manufacturer: ABB Oy, Motors and Generators, Vaasa, Finland • Model: M3GP 355SMB 2 • Product code: 3GGP351220-ADG +VC • Serial number: 3G1F2107716933 • Year of manufacture: 2021 • Rated output: 315 kW • Rated frequency: 50 Hz • Rated speed: 2,980 rpm at 400 V and 690 V, 2,982 rpm at 415 V • Voltage and current: 400 V Δ / 531 A, 415 V Δ / 511 A, 690 V Y / 308 A • Duty rating: S1 (continuous duty) • Efficiency class: IE2, 95.7% at full load • Mounting arrangement: IM B3 / IM 1001 (foot-mounted) • Degree of protection: IP55 • Insulation class: F • Bearings: 6316M/C3 at both ends • Motor weight according to the nameplate: 1,680 kg The motor is stored on a wooden pallet, as shown in the photos. Operating condition and previous service history are unverified. Please contact us to discuss inspection, collection, or freight. Hedpfo Aivi Sjx An Eefp Additional Information Technical documentation and operating instructions are available. Please contact us for additional information, technical specifications, pictures, or a quotation. Price & Delivery Information Price: On Request Please contact us with your required quantity for a quotation. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Surplus stock – sold as is, where is, without warranty, claims, or returns.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,200 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, For sale is a powerful and precise CNC lathe EMCO TURN 365 / E65, manufactured in 2007. The machine is equipped with a Siemens control system, powered tools on all 12 stations, a C-axis, a tailstock, and a matching EMCO COMPACT LOAD E65 short bar loader. The machine is in well-maintained condition and is ready for immediate use. Technical data: Manufacturer: EMCO MAIER Machine operating hours: 17,842 h Production operating hours: 3,369 h Model: EMCOTURN 365 / E65 Year of manufacture: 2007 Control system: SIEMENS Working area & travels: Travel X: 210 mm Hfjdpfxoz Aknho An Eop Travel Z: 610 mm C-axis: 360° (resolution 0.001°) Max. turning length (part length): 520 mm Max. turning diameter: ø 310 mm Diameter over bed: ø 600 mm Max. bar diameter: ø 65 mm Main spindle: Speed range: 60 – 4,200 min⁻¹ Drive power (100% / 60% ED): 15 / 18 kW Max. torque: 192 Nm Spindle connection: KK 6 (DIN 55026) Tool turret: Type: 12-position VDI 30 axial turret Powered tools: Yes, on all 12 stations (for milling & drilling) Accessories & equipment: Automation: Short bar loader EMCO COMPACT LOAD E65 Tailstock: Hydraulically operated (500 mm travel, MK4) Chip conveyor: Included Measuring arm: Tool setting measuring arm directly in the working area Part catcher, storage at chip conveyor Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying/selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Applied Type: Applied Biosystems ViiA7 Biosystems ViiA7 Specifications: Block change from the front of the instrument in less than 1 minute; no secondary tools required Supported applications: Standard curve, comparative CT, genotyping, presence/absence, HRM, melting curve Temperature uniformity: ±0.5 °C, within 30 seconds after reaching the target temperature Run time: ~35 min for 96/384-well blocks with Applied Biosystems® Fast Master Mix Supported blocks and volumes: 96-well standard (10–100-μl reactions) 96-well Fast (10–30 μl reactions) • 384-well (5–20 μl reactions) TaqMan® Array Micro Fluidic Cards (~1 μl reactions) Detectable sensitivity: up to 1 copy • Excitation/detection wavelengths: 6 excitation (450–670 nm) 6 emission (500–720 nm) • Dynamic range: Up to 9 logs linear dynamic range Resolution: Detects only 1.5-fold changes in target quantities in a singleplex reaction 21 CFR p11 Enablement: Security, audit, and e-signature functions for instrument data Automation: Includes plate loading arm with barcode (distribution, service, and support provided by Life Technologies) Remote notification: Notifies the user via email when the run is started, stopped, or aborted Data export format: Fully configurable by the user Description: Applied Biosystems Real-time PCR ViiA7. Ideal for performing real-time PCR with medium to high throughput. Interchangeable blocks for 96-well, Fast 96-well, and 384-well plates, as well as TaqMan Array Cards. Fast block change. Touchscreen interface. 2x Ethernet connection. 2x USB connection. 1x RS 232 connection. 2x connection on the display. Weight: 67 kg Condition: used Hfedpszd Ud Nefx An Eep Scope of supply: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed rotary vane vacuum pumps. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These parts are pinned together to ensure easy disassembly and assembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air swallowing High leak tightness (4He-compatible) Technical data: Product: TRIVAC D 40 B Suction flange: DN 40 ISO-KF Discharge flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Hjdpfx Anszianws Ejfp Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10-4 mbar Ultimate total pressure without gas ballast: < 2.0 x 10-3 mbar Ultimate total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume: min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Technical Details Maximum turning diameter: 345 mm Turning length: 3,000 mm Control system: Sinumerik 805 Siemens Swinging diameter over bed: 570 mm Maximum swinging diameter over cross slide: 365 mm Main spindle: Speed range - main spindle: 3 - 2,500 min⁻¹ Number of speeds: 2 Drive power - main spindle: 15 / 21 kW Maximum torque: 2,000 Nm Spindle diameter in front bearing: (100) mm Spindle bore: (62) mm Spindle head: DIN 55027 No. 8 Travel distances: Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock: Quill diameter: 80 mm Tailstock arbor: MK 5 Quill stroke: 190 mm Feeds: Hodpfs Akd Iysx An Eofp Maximum longitudinal feed: 10 m/min Maximum cross feed: 5 m/min Threading device: Thread pitch: 0.1 - 400 mm Total power requirement: 40 kVA Machine weight: approx. 5.6 t Space requirement: approx. 6.0 x 2.5 x 2.0 m Accessories Documentation Coolant system Tailstock Various tool holders Steady rest 30 - 365mm Steady rest 25 - 160mm

Condition: used, Gram Xtrem Condor S Platform Scale, 3000 kg Robust industrial floor platform scale made of stainless steel. Suitable for the food and chemical industries, as well as all other industries where scales come into contact with water, moisture, or other corrosive substances. Maximum flexibility: Weighing of pallets, drums, loaded transport or hand pallet trucks, trolleys, or roll containers. Suitable for weighing standard-sized truck pallets (1200×1000 mm), large drums, roll containers, or containers on wheels. Adjustable feet ensure stability during weighing and optimal force transmission to the load cells. Suitable for floor installation. Optional: Ramps for loading and unloading weighing goods without special equipment. Very low platform height (50 mm) for easy access for loading. Hjdpfxovtl Ibe An Eofp Connection to PC software Xtrem for simultaneous recording of the weighing values of multiple scales. Minimization of technical problems through a digital connection between the platform and the display unit. Can be calibrated according to calibration class III. Gram K4i Display Unit - Stainless steel with total protection. Illuminated LCD display with extremely large digits for remote display of the weight of the object on the scale. The housing is made of stainless steel, and the resolution is 30,000 / 60,000 divisions. Features: LCD display with large digits (52 mm) Verifiable indicator for legal use Housing made of stainless steel, protection class IP-65 RS output for connecting printers, monitors, or a PC Mounting on wall, column, or table Limit value function Piece counting function Low battery indicator Max: 3000 kg Min: 20 kg e=1000g Platform scale External dimensions: 1700 x 1500 mm Weighing area: 1500×1500 mm Optional: Ramps for loading and unloading weighing goods without special equipment. Weight: 239 kg You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM Hodpfx Ano Akchqe Eofp WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm Hsdpfxj Akb S Ao An Eefp - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial companies, and logistics operations that require robust and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new installations, retrofitting, or expanding your existing racking system. Hfodpfx Ans Akcx Ss Ejp Customizable: The racking frames (Type P120) can be rebuilt to your desired height – professionally and precisely in our workshop. We provide made-to-measure racking solutions for every warehouse requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 540 incl. floor spaces - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price: €11,844.00 net €14,094.36 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany via our partner shipping company – freight costs depend on postal code - Professional installation and dismantling by trained teams is optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding quote tailored to your requirements. Whether new build, modification, or extension – we provide competent advice for your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, shelving, and other solutions. Many systems are assembled and ready to view. Our specialist advisors are available for questions and individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Mitsubishi Type: Mitsubishi Melfa RV-3SDB-S15 Mitsubishi Industrial 6-Axis Articulated Arm Robot The RV-3SDB articulated arm robot The RV-3SB robot is specifically designed for handling up to 3.5 kg. The enclosure, which meets the IP 65 standard, ensures operation under extreme conditions. Special Features: • Adjustment of axis compliance for workpiece tolerance compensation • Conveyor tracking • Sensorless collision detection • Encapsulated design • Adaptive speed optimization Feature/Function Degrees of Freedom (Number of Axes) 6 Design: Standard (Oil Mist) Mounting: Floor, wall or ceiling mounting possible (wall mounting with limitations in the J1 axis) Construction: Vertical articulated arm Drive System: AC servo (all axes with brake) Position Detection: Absolute encoder Range of Motion: Degrees Body (J1) 340 (−170 to +170) Shoulder (J2) 225 (−90 to +135) Elbow (J3) 191 (−20 to +171) Forearm Rotation (J4) 320 (−160 to +160) Wrist Bend (J5) 240 (−120 to +120) Wrist Rotation (J6) 720 (−360 to +360) Movement Speed: Degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm Rotation (J4) 412 Wrist Bend (J5) 412 Wrist Rotation (J6) 660 Resultant Maximum Speed 5500 mm/s Lifting Force Nominal value 3kg Maximum value 3.5kg Reach Radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Hfedjzdiukepfx An Ejp Robot Controller: CR1DA-721-S15 (230V) Teachbox: R46TB with color/touch display Technical Data: Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection Type: Connection to the robot controller with a circular connector, cable length 7 m Interfaces: RS422 For connection to the robot controller Display/Screen: Touch-sensitive 6.5" TFT monitor with backlight and 640 × 480 pixel resolution, the touchscreen can be operated with fingers or a stylus. Condition: used Scope of Delivery: (See image) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have by phone.