Used Bearing Resolution for sale (3,835)

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple Gjdsqlck Njpfx Aa Djui - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Godpohkz E Tsfx Aa Dsui Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg - available immediately - Guodpfxolht Hwe Aa Dji

Condition: like new (used), Year of construction: 2022, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Here’s the very 1st used MACH 845-8T Toolroom VMC to appear on the 2nd hand market! This low hours, highly spec’d and immaculate example is equipped with DynaPath’s Windelta touch screen control has been rented to a FE College and is now availabel for sale...its in as new condition, has an 8,000RPM spindle, 8Gb memory, 1,000 blocks of look ahead and is Wi-Fi enabled for remote support from MACH & DynaPath..(that’s included on this used machine tool ) Taken from MACH Machine Tools marketing material, they say; This small footprint, high build and component part quality toolroom VMC features MACH’s cleverly designed 8 position ATC that’s arrange around the 10,000 RPM spindle, for simple, efficient and quick tool changes. As with all MACH CNC machines, the MDS 845-8T is equipped with DynaPath’s feature packed Windelta control system, with touch screen user interface. The control is capable of accepting multiple programme formats via its inbuilt USB, Ethernet or wireless interfaces. It can be programmed Conversationally, via DXF, in ISO/EIA G-Code formats and has a DFX and DFX program editor in built, making the control capable of accepting and editing programmes in any machine format. As a standard feature its equipped with full Wi-Fi connectivity for remote factory support. It has a huge 8Gb of memory, 1000 blocks of look ahead, for high quality and fast 3D contouring, a solid-state hard drive, Yaskawa digital drives and servo motors and a Delta spindle drive that controls the 10,000 RPM Direct Drive spindle, all mounted in an air-conditioned electrical cabinet. Specified way beyond its price point and backed up by the now legendary, MACH-DynaPath’s worldwide Wi-Fi remote support and team of dedicated engineers. Specification: Travels: X/Y/Z: 800 / 450 / 450 mm Spindle Nose to Table: 90 ~ 537 mm Centre of spindle to column: 435 mm Spindle Taper: BT40 Spindle Max RPM: 8,000 RPM Table Size: 850 x 420 mm Godpemmgpdefx Aa Deui T-Slots: 18 x 85 x 4off Max Table Load: 220 kg Max Rapid Rate: 20 m/min Max Cutting Rate: 10 m/min X/Y/Z Axis Type: Linear rail with roller bearings + Ball Screw ATC Type: 8-Tool Independent Arm, arrange around the spindle Max Tool Dia: 63 mm Ø Max Tool Weight: 5 kg Tool Change time: (Tool to Tool) : 2.8 sec Spindle Motor: 5.5 kW (7 HP) / 35 Nm X/Y/Z Servo motor rating: Yaskawa 0.85 / 0.85 / 1.3 kW Positioning Accuracy: 0.005 um Repeatability: ±0.003 um Power requirement: 15 Kva (supplied with 415V-220V 7kVA Transformer for UK) Air requirement: 6 kg/cm3 Footprint: (LxWxH): 2200 x 2539 x 2304 mm Weight: 3750 kg Control System: DynaPath WinDelta with 15" Touchscreen LCD D11 Console, MPG Handwheels, Conversational + DXF + ISO/EIA G-Code UKAS & CE compliant safety modules, interlocks & certification. 415V to 220V 7kVA Supplied with: UKCA/CE safety enclosure, interlocks and electrical equipment, 10,000 RPM BT40 spindle, set of 8 pull studs, through spindle coolant, bed wash, coolant/air gun, swarf augers, LED machine lighting, end of cycle light stack, electrical cabinet air conditioning, MPG, 8Gb of memory, DFX File reader with program editor, 1000 blocks look ahead, Wi-Fi remote support.

Condition: used, Year of construction: 2015, power: 90 kW (122.37 HP), nominal power: 90 kW (122.37 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,480 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 156 A, type of input current: three-phase, overall weight: 692 kg, total length: 1,035 mm, total width: 557 mm, total height: 695 mm, torque: 580 Nm, type of cooling: air, protection type (IP code): IP55, No. 10040 Three-phase motor Simotop / Techtop T3CR 280M-4 / 90 kW / 1480 rpm Unused, year of construction 2015, in new condition Three-phase asynchronous motor Output 90 kW at 50 Hz 4-pole, speed 1480 rpm Voltage Δ/Y 380/660 V or 420/720 V at 50 Hz Rated current 156.1/89.9 A or 141.3/82.4 A Power factor cos φ 0.92 Rated torque approx. 580 Nm Can be operated in delta on a 400 V supply, therefore suitable for star-delta starting Also suitable for 60 Hz 90 kW at 400/690 V and 1770 rpm 108 kW at 480/830 V and 1780 rpm Efficiency class IE3, efficiency 95.2% Protection class IP55 Insulation class F Duty type S1 continuous operation Cooling method IC411, totally enclosed fan-cooled (TEFC) PTC thermistors for winding protection IEC standard motor, frame size 280M, shaft height 280 mm Mounting type IM B3, foot-mounted with bolted-on feet Foot hole spacing 457 x 419 mm, 4 holes Ø 24 mm Shaft end Ø 75 x 140 mm with 20 mm key Grey cast iron housing, colour RAL 7024 graphite grey Ball bearings SKF 6316 ZZ C3 on both ends Terminal box on top, cable entries 2x M50x1.5 and 1x M16x1.5 Motor dimensions approx. 1035 x 557 x 695 mm LWH Transport dimensions approx. 1200 x 800 x 900 mm LWH Weight approx. 692 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Guedj Afbxgepfx Aa Doi Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. control Powercom Weinig Powermat 500 for window producers, PowerLock, with tools Gjdpfx Aezp Rxysa Dsui ----- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: ----- Tool arrangement no. 018 for window production Technical Data: ----- Working width: 20 – 230 mm (with tool cutting circle 93 – 125 mm) Working height: 8 – 120 mm (with tool cutting circle 93 – 125 mm) 1. Tool Spindle ----- First bottom spindle Diameter: 40 mm Motor with brake: 7.5 kW Speed: 8,000 rpm Tool cutting circle: 125 – 180 mm Tool cutting circle (rebate cutter): 130 – 160 mm Axial adjustment range: 17 mm Rebating device MarathonCoating for table insert before 1st bottom spindle 2. Tool Spindle POWERLOCK/HSK ----- First right spindle Motor with brake: 7.5 kW Speed: 8,000 rpm Includes high-performance ball bearings Tool cutting circle: 93 – 200 mm Maximum profiling depth: 35 mm Axial adjustment range (PowerLock): 55 mm Radial adjustment range: Min. tool diameter at fence level: 93 mm Max. tool cutting circle behind fence line 200 mm Right tool spindle: axial positioning (55 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm CNC-controlled axial adjustment CNC-controlled radial adjustment 3rd tool spindle POWERLOCK/HSK ----- First left tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Maximum profiling depth 35 mm Axial adjustment range for PowerLock 55 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Pressure shoe in front of left tool spindle, incl. 2 spring-loaded lateral pressure rollers 4th tool spindle POWERLOCK/HSK ----- First top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cutting circle for straight-knife cutterheads max. 163 mm Maximum profiling depth 35 mm Axial adjustment range 40 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Top tool spindle: axial positioning (40 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm 5th tool spindle POWERLOCK/HSK ----- Second top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm To...

Condition: new, Year of construction: 2026, The carrier unit allows the operation of a wide range of equipment, such as cone splitters, earth augers, root grinders, sweepers, rotary harrows, and much more. The equipment is developed and manufactured in Germany. Very robust roller bearings ensure that the forces are safely absorbed in both axial and radial directions. A large, high-performance hydraulic motor, type HMT500, provides the necessary torque for powerful and efficient operation, with up to 1600 Nm. Oil flow rate up to 125 l/min, pressure up to 210 bar, and speed of 240 rpm. Article no.: MTT500 Guedpfx Aaodf Sgro Dji Earth augers, drill cones, and other tools are available on request for an additional charge. Quick-change mounts MS 01 - MS03 - MS08 or other adapters are also available on request and for an additional charge.

Condition: new, functionality: fully functional, Year of construction: 2026, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips Gujdpsupiapefx Aa Dji For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: used, Year of construction: 2003, 1 used, very well-maintained universal milling machine with 3-axis digital display FAGOR, stepless feed and overarm drive Gsdpfx Ajbpmurja Deui Manufacturer: ARSENAL, Bulgaria Model: FUV 321 M Year of manufacture: 2003 Technical data: Spindles: Spindle mounting, vertical + horizontal ISO 50 Speed range, vertical, stepless 30 – 2000 rpm Speed range, horizontal, stepless 30 – 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Overarm adjustment approx. 600 mm Table swiveling ± 45° max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm Table adjustment: Feeds, longitudinal and transverse, stepless 12.5 – 630 mm/min dito, vertical, stepless 5 – 262 mm/min Rapid traverse, longitudinal and transverse 2.5 m/min dito, vertical 1.04 m/min Drive Drive power 7.5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: • 3-axis digital display, manufacturer FAGOR, model NV 300 M • Universal milling head system “HURON”, adjustable manually over 2 levels • Stepless feed via joystick and potentiometer in all 3 axes • Stepless speed for vertical + horizontal via potentiometer with 2 servo drives, manufacturer TELEMECANIQUE, model Altivar 28 • Stepless feed and stepless speed with digital display each • Overarm with motorized drive of the universal milling head • Increased speed range up to 2000 rpm • Automatic machining cycle for the X-axis • Horizontal milling device with 2 opposing bearing blocks • Coolant system • Central lubrication system • Swarf drawer • Machine feet • Machine light • Operating manual • Electrical equipment CE • CE compliant Original new price: 65,800.00 € net The machine can be inspected and demonstrated at our warehouse at any time after prior appointment. Siegfried Volz Werkzeugmaschinen Ruüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Gjdpfx Aascnxa Se Dsui Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table Gujdpfx Ashp Rdlsa Doi High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: used, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Year of manufacture: 1997 Colour: Cream Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm + stacking-station Guodpfozlytljx Aa Dji Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), 1 used, partially overhauled vertical milling head with large overhang suitable for drilling machines manufactured by PAMA (origin: Italy) or other manufacturers Spindle mount: SK 50 Overhang: 660 mm Godpfxoz Euyds Aa Djui Flange size: 465 x 440 mm Inner bore: 294 mm Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions L x W x H: 750 x 440 x 465 mm Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Stepless angle adjustment, manual • 4 fixed indexing points, each 90°, with dowel pins • Tool clamping with tightening rod • For retrofitting to conventional, NC or CNC milling machines or drilling machines of any type, L-R pivoting, manual tool clamping, … The following partial overhaul was performed: - Grinding of the SK 50 tool mount on the milling spindle - Replacement of the bearings in the milling spindle - New shaft seals Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Used Machine Features and Technical Specifications: - Tenon Cutting and Slotting Unit 1376 for table and swivel milling machines - Quick and easy installation on the machine table - Smooth-running sliding carriage (ball-bearing mounted) - Stop rail with adjustable miter stop (30° to 150°) Gedpfsztfuksx Aa Djui - Base plate length: 1000 mm - Size of the sliding plate: 295 x 255 mm - Sliding travel: 710 mm - Mounting height: approx. 56 mm - Weight: approx. 45 kg

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: Gujdju Ndhijpfx Aa Doi - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *

Condition: used, Year of construction: 2018, operating hours: 7,490 h, functionality: fully functional, machine/vehicle number: Robot: 4600-107494 / Controller: 4600-107494, overall weight: 538 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm. Year of manufacture: 2018. Operating hours: 7490. Software: RobotWare RW 6.07.01.00. Equipped with an ABB FlexPendant programming device, connection cable set, and a Foundry Plus protective version with a label bearing the inscription “Foundry Plus”. Gujdpfx Ajzamf Sea Dji

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 - Number of mounting threads: 23 x M12 - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm Godpfx Aas Afnc Ej Djui - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: Gujdsy Ah Rcspfx Aa Doi 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators Guedpfx Aez Ipl Hsa Dji • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Gedpfe Ahkwiox Aa Dsui Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10654 Manufacturer: DMG Type: DMU DMC 80 FD duoblock Year of construction: 2014 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: mm Y-Travel: 1050 mm Z-Travel: 850 mm Gedpfx Aaj Ahmvxo Dsui B-Axis: 180 ° C-Axis: 360 ° Machine length: 5100 mm Machine width: 2500 mm Machine Height: 3100 mm Tool Taper: HSK - 100 Numbers Of Tools In Magazin: 243 Turning Speeds: 10000 RPM Max. Torque: 2050 Nm Feed Speeds X/Y/Z Axis: mm / min Rapid Travel X/Y/Z: 60 mm / min acceleration: 7 / 7 / 7 m/s² Total Power Requirement: 36 kW Weight Of The Machine Ca.: 15300 t Spindle speed gear stage 1: min Spindle speed gear stage 2: min Holding torque: 3400 Nm Max. rotation of the table top: rpm Resolution of the measuring system: 0,001 ° Pallet clamping surface: Ø x 630 mm Weight of the pallet: 300 kg Feed force in X and Y axes: 13 Feed force in the Z-axis: 9 furnishing operation: 20 - 2000 m / min Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: excellent (used), Year of construction: 2015, operating hours: 12,068 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 5,200 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 14,500 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Power Diamond TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 2.1 R8 Colour touch screen: 15 ["] Number of axes: 5 Stroke X axis: 460 [mm] Resolution X axis: 0.0001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.0001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 14.5 [kW] Max. diameter grinding wheel: 200 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 12068 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 5200 [Kg] Gjdpfx As Ahpfbja Deui ADDITIONAL EQUIPMENT: CO2 fire extinguishing system (to be inspected by the buyer through a qualified body) A-axis for cylindrical grinding (Hollowshaft option) 8-position grinding wheel changer Electrostatic mist separator with noise silencer, DSL type AES-GAMMA 30 Hydraulic and electrical connections for automatic steady rest operation Automatic steady rest Manual tailstock Combined filtration system with paper band filter + cartridge filters, connected to a cutting fluid cooling unit 3-color signal tower light "Eco Loader" tool loader with its tool clamping system and 5 cassettes (Ø6, Ø8, Ø10, Ø12 and Ø16) E386ES tool clamping chuck with 5 collets (Ø8, Ø10, Ø12, Ø16, Ø20) Grinding wheel holders x2 electrode holders L = 25 mm x1 electrode holder L = 45 mm x5 grinding wheel holders L = 45 mm SOFTWARE: TOOLSTUDIO Standard & Advanced TOOLSTUDIO Step Tools License TOOL STUDIO PC License WALTER WINDOW MODE (P1, P2 & P3) for grinding (P51 & 52 for erosion) WALTER WINDOW MODE Package 63 for PCD drills More information upon request.

Condition: new, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,382 mm, loading space width: 2,480 mm, total length: 8,700 mm, total width: 2,520 mm, total height: 3,530 mm, Year of construction: 2026, Equipment: ABS, Technical specifications* MEILLER tipping semi-trailer MHPS44.3-N * MEILLER high-pressure system, 200 bar * Oil volume 65 liters * Suitable for MAN tractor unit * Fifth wheel height unladen: 1,250 mm * Fifth wheel height laden: 1,230 mm * Chassis language: German (signs, lists, instructions) ----Tipping bridge / body* Halfpipe semi-circular body * 3-part semi-circular body * Nominal length 7,600 mm * Side wall height 1,500 mm * Volume 24.0 m³ * Internally mounted pivoting rear wall * Sloping front wall * Sloping rear wall * Beveled body corners for better material flow * Stabilizing front telescopic cylinder SBF70 * Steps inside front left * Abrasion-resistant rubber pads * Adjustable front supports * Lateral tarpaulin hooks * Flush rear wall bearing ----Wear-resistant design (material package) Industry package* Sand, gravel and aggregate transport Wear-resistant steel* Floor/wall combination SKB II * Tailored Blank floor * Floor 5/6 mm HBW450 * Side walls 4 mm HBW450 * Front wall 4 mm HBW450 * Rear wall 4 mm HBW450 Note: A 1 mm thicker material was used in the rear body area to reduce wear. ----Chassis* Air-sprung three-axle unit * Statically and dynamically balanced * Axle manufacturer BPW * Airlight II series * Axle spacing 1,310 mm * Axle track 2,140 mm * Rigid axles * Axle load per 8 t (technically 3 × 9 t) * Reinforced single-leaf torsion control arms * Offset ET0 (S-hub) ----Tires* Continental tires * Size 385/65 R22.5 * Profile S * Painted steel rims * Uniform wheel studs * Tire pressure monitoring system (TPMS) ----Braking system* Drum brakes 420 × 180 mm * Asbestos-free brake linings * ABS 2S/2M (Wabco) * Electronic brake system EBS E + RSS IEBS * Automatic load-dependent brake control (ALB) * Spring brake cylinders * Two non-interchangeable coupling heads with line filters ----Air suspension and driving assistance* ECAS electronic air suspension * Automatic lowering during the tipping process * Two-sided axle lift * Axle lift on the 1st axle * Starting aid * Off-road parameterization ----Hydraulics* Robust MEILLER 4-piston front telescopic cylinder * Operating pressure 275 bar * High-pressure hose DN20 * Hydraulic coupling Argus HDK DN20 * HLPD-22 mineral hydraulic oil * Hydraulic connection version 1 ----Safety* SafeStart system * Mechanically folding underrun protection according to ECE R58 * Contour marking according to EC * Towing eye at the end of the frame * Fifth wheel pin 2" according to DIN 74080 * Blocking wedges (2 pieces) according to DIN 76051 ----Lighting* LED outline lights * LED side marker lights * LED position lights * LED license plate lighting * ECO-LED II tail lights * Flashing side marker lights * 2 LED work lights at the rear ?cite?Order confirmation ----Access steps and attachments* Bolted steel access ladder on the left * Folding ladder section * Aluminum extension ladder 4 m * Maintenance-free two-stage telescopic supports with plate foot * Aluminum air tank * Document pocket on the front wall ?cite?Order confirmation Fenders* ?-Shell fenders * Plastic fenders * Folding mud flaps * Splash guards * Shortened fenders at the rear * Control switch on the frame ?cite?Order confirmation ----Electric sliding tarpaulin* Electric MEILLER sliding tarpaulin Gedpfx Ae Aiaixea Dsui * Remote control * Automatic opening during tipping * Two-cable system * Automatic folding rear spreader * Tarpaulin spreader height 300 mm * Continuous guide rail * 600 mm tarpaulin carrier * Handles on the tarpaulin carrier * PVC tarpaulin fabric * Special

Condition: as good as new (ex-display), Year of construction: 2021, bore capacity in steel (diameter) 28.0 mm threading 12 M bore stroke 130 mm throat 250 mm table: 375 x 375 mm morse taper 3 MK turning speeds 75 - 3.200 U/min total power requirement 1.1 / 1.5 kW weight of the machine ca. 215 kg. range L-W-H 450 x 600 x 2020 mm Description : - 12 switchable speeds thanks to the powerful 2-stage motor - Direction of rotation switch for clockwise and counterclockwise rotation for thread cutting - Solid work table (rotatable 360 ??°), swiveling from -45 ° to + 45 ° - Machined machine base for clamping particularly high workpieces Guodexaa T Iopfx Aa Dji - Quality ball bearings ensure high concentricity - Easy tool change thanks to the automatic tool ejector - Adjustable drilling depth stop, drilling depth can be read off using a scale - Stable and polished steel column, designed for heavy use - Very smooth running thanks to ground gears in the gearbox - High level of safety thanks to the height-adjustable chuck guard with microswitch Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reduction sleeve MK 3/2 - Automatic tool ejector - Thread cutting device - Right-left rotation device - Height-adjustable protective cover - work light

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Gjdpfj Ahkx Isx Aa Deui Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.