Used Behringer Hbp 220 A for sale (90)

Condition: used, Year of construction: 1982, cutting diameter 200 mm Gkedsy N D H Hepfx Abhjd band length 350 mm capacity 90 degrees: round 200 mm total power requirement 3,0 kW weight of the machine ca. 0,45 t dimensions 1,4 x 1,4 x 1,3 m Automatic hacksaw - with 1000 mm infeed roller conveyor - preset counter - material stop with trigger, max. 600 mm - coolant system

Condition: ready for operation (used), Year of construction: 1996, Maximum shaft diameter (bevel cut, 90 degrees) 350 mm Machine height 1300 mm Machine width 2200 mm Machine length 2000 mm Machine weight 1.4 t Gedpfxezg Nr Te Abhokd

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Gksdpfxovdk A Es Abhod Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 2001, machine/vehicle number: 201224, functionality: fully functional, cutting speed: 110 mm/min, Used band saw Type: Semi-automatic *This machine was initially automatic, it has been modified to be semi-automatic. Cutting capacities: 90º round, 15º left-right, 30º left-right, 45º left-right: 410mm. Square at 90º: 850x400mm Square at 15º left-right: 800x400mm Square at 30º left-right: 700x400mm Square at 45º left-right: 550x400mm Minimum cutting capacity: 10mm / 10x8mm Minimum cutting length: 35mm Cutting speed: 17-110m/min. Gksdpsuc Tpasfx Abhed Drive motor power: 7.5kw Hydraulic pump motor power: 5.5kw Actions from control panel: Rotation to degrees. Saw drive Drive forward and backward the feed rollers. Raise and lower clamp clamps. Open and close clamp Machine being overhauled. Request operating video.

Condition: used, machine/vehicle number: 10000886, functionality: fully functional, empty load weight: 1,600 kg, Technical data Working range - Æ/ flat at 90° 800 mm / 1300 mm x 750 mm Working range - Æ / flat at 75° + hpr. 800mm / 1150mm x 750mm Working range - Æ / flat at 60° + hpr. 800mm / 1000mm x 750mm Working range - Æ / flat at 45° left 600 mm / 800 mm x 600 mm Smallest material dimension Æ / flat 30 mm / 20 mm x 20 mm Smallest cutting length (90°) 35 mm Cutting speed range 17 - 120 m/min System pressure event. belt tensioning 95 bar Godpfx Ajwqlltjbhekd Belt drive power 11 kW Hydraulic pump motor power 5.5 kW Cooling pump motor power 0.12 kW Power supply motor 0.09 kW Total power input - approx. value approx. 28 kW Voltage 400 V, 50 Hz Control voltage / voltage at hydraulic valves 24 V = (DC) Current rating approx. 38 A Protection 58 A Cable cross-section min. 4 x 16 mm² Dimension of saw blade see title. page Weight (net) 1600 kg Mat flow height - working height 830 mm Length x Width x Height see base plan

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Gkjdox Tvkxepfx Abhod

Condition: used, Year of construction: 2009, Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Sawing area flat 45°: 140 x 120 mm Gksdpfx Aoygkvnsbhod Sawing area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Sawing range round 45°: 140 mm Sawing range round 30°: 110 mm Feed length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spray device Hydraulic material tension Hydraulic material feed Weight: approx. 1300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 410 mm, BEHRINGER HBE 411 A – Dynamic, NEW MACHINE! – at a top price Manual positioning 18 Cutting monitoring 22 Saw drive 5.2 kW 50-2 Chip conveyor 100 5 Gkodpfx Ae Adpumsbhod Micro 250 Package clamping device 440 Bar end detection 535 Retract cylinder 550 Clamping pressure regulation 832 Line laser 940 Illumination 941 Cutting channel extension Behringer new machines: Come, see, buy Immediately available from stock Warranty from date of purchase Do you have a breakdown? Replacement in the shortest possible time Delivery and installation on request Immediately available from stock

Year of construction: 2019, condition: ready for operation (used), overall weight: 3,500 kg, total width: 2,850 mm, total height: 2,220 mm, product length (max.): 2,000 mm, Metal Band Saw manufactured in 2019. This Behringer HBE 511 A features a cutting capacity of up to 510 mm for round and flat materials. It includes a single feed stroke of 650 mm and operates with a band speed of 15–150 m/min. The machine is equipped with a servo-controlled saw frame feed and hydraulic clamping vice. If you are looking to get high-quality cutting capabilities, consider the Behringer HBE 511 A machine we have for sale. Contact us for more information. • Cutting capacity at 90°: • Round: up to 510 mm diameter • Flat: up to 510 × 510 mm • Minimum material size: • Round: 10 mm diameter • Flat: 10 × 8 mm • Material feed: • Single feed stroke: 650 mm • Minimum remnant length (automatic): 80 mm • Material feed via ball screw • Band speed: 15–150 m/min • Main saw motor power: 5.2 kW • Total connected load: 6.5 kW • Material support height: 800 mm • Saw blade dimensions: 5,730 × 41 × 1.3 mm Gjdoz Dg Dlopfx Abhskd • Features: • Servo-controlled saw frame feed via ball screw • Hydraulic clamping vice • Electrically driven chip-removal brush for saw blade cleaning Additional equipment • Infeed roller conveyor • Outfeed roller conveyor

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units – Behringer HBE 321 A dynamic new machines, available for immediate delivery from stock. Attention: You can receive up to 15% in funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (item no. 33) Gkodpo Adpvqsfx Abhod Active cutting monitoring (item no. 22) BEHRINGER screw-type chip conveyor (item no. 105) Automatic bar-end detection (item no. 535) Lighting (item no. 941)

Condition: used, Year of construction: 2014, Behringer LPS 40-4 - Vertical metal bandsaw - Year of manufacture: 2014 - Hydraulic band tensioning - Servo-controlled feed - Robust C-frame - Cutting monitoring system - Coolant cleaning gun - Coolant spray and lubrication device Gjdpfjz H Acpex Abhskd - Guide arm - Material stop with mm graduations - Laser for cut line projection - Material table base unit (external table) - Manual material stop (internal table) - Platform for operator - Roller conveyor segment, raising - Roller conveyor segment, raising with drive Technical data - Working area (L x W x H): 4000 x 680 x 400 mm - Minimum cut height: 10 mm - Minimum cut width: 15 mm - Internal table support area: approx. 680 x 4000 mm - Internal table max. load: 7500 kg - External table support area: approx. 680 x 4000 mm - External table max. load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System / band tension pressure: 85 bar - Coolant quantity: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 25 A - Fusing: 35 A - Wire cross-section: min. 10 mm2 - Machine dimensions W x H x D: 6450 x 2870 x 2350 mm - Weight (net): approx. 10000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units of Behringer HBE 321 A dynamic new machines available for immediate delivery from stock. Gkodpfx Aoz Epy Sebhed Attention: You can receive up to 15% funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (Pos. 33) Active cut monitoring (Pos. 22) BEHRINGER screw-type chip conveyor (Pos. 105) Automatic bar-end detection (Pos. 535) Lighting (Pos. 941)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 600 mm, cutting width (max.): 510 mm, control type: CNC control, Equipment: documentation/manual, lighting, BT65 touchscreen control panel Motorized duplex brushing system 5.5 kW drive motor Centralized lubrication system Deviation control Operator platform (work surface height -150 mm) 600 mm 1,270 mm 510 mm 10 to 110 m/min Ball screw CNC measuring device, cutting width 5 to 510 mm Linear laser Spraying gun Chip conveyor (scrapers), height 1,200 mm Stainless steel collection tray with grating Electrical cabinet air conditioning Gkedj Adufwepfx Abhsd Hydraulic oil heater Electrical cabinet pre-heating with thermostat Light column Lubricant flow control

Condition: used, Year of construction: 2017, Behringer LPS 60-T - Vertical metal bandsaw - Year of manufacture: 2017 - Operating hours of the saw drive: 32441 h - Rigid saw frame in C-design, minimizing torsion and vibration - Robust gearbox with appropriate gear ratio and drive with higher power (saw drive 5.5 kW / band speed 10-110 m/min) - Designed for saw blades with the dimensions 54 x 1.6 mm, primarily for cutting difficult-to-machine materials and larger dimensions - 2 saw blade wheels with wear-resistant running surface - Combined roller and hydraulically pre-tensioned carbide sliding guide for the saw blade - Hydraulically controlled saw blade tension, electrically monitored with automatic pressure reduction when the machine is at a standstill Gkjdpfez H Ac Asx Abhsd - Automatic shutdown in case of saw blade breakage - Saw blade drive with frequency converter - By opening the door, the blade change can be carried out effortlessly and without tools by one person. Blade change time approx. 2 minutes - Saw blade cleaning by rotating double brush Ø100 mm - Cutting deviation for normally machinable materials within 0.1 mm per 100 mm cutting height - Heavy-duty, torsion-resistant machine stand in box design - Chip conveyor with separate electric drive - Hydraulic system designed in a block construction - The material support table is mounted on linear guides and can be moved via servo drive Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (including base pan) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or band tension pressure: 85 bar - Quantity of coolant: approx. 100 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - coolant pump: 0.15 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current draw: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: new, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 630 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 200 rpm, rotational speed (min.): 20 rpm, total height: 2,700 mm, total length: 2,650 mm, total width: 4,385 mm, overall weight: 6,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the High-Performance Bandsaw HBM540A SpeedCutting Technology (optional) By combining SC-Performance saw band guides, a high-performance coolant system, dynamically controlled feed rate, and a specially optimized auto-feed control, you can achieve maximum performance and tool life from the saw band used. Prepared for Automation A powerful sawing machine concept places high demands on material handling. The high-performance bandsaw automatons of the HBM series are often configured as automated sawing centers. Therefore, the machines are already equipped in the basic version to connect extensive peripherals. Servo Feed System The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter idle times and more precise feed rates. Your advantage: higher cutting performance and longer band life! Godpfx Asz Rzq Ijbhskd Sensitive Behringer Cutting Pressure Control increases the cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the industrial saw to the changing material cross-sections. Due to its arrangement directly at the back of the saw band, the system regulates quickly and precisely. Optimal Chip Removal The highest cutting performance of the industrial saw places high demands on chip removal. The wide, funnel-shaped machine stand allows for free chip flow into the underlying chip conveyor with an integrated coolant tank. The discharge height of 800 mm or optionally 1,200 mm allows the use of large chip containers. Economical Use of Carbide Saw Bands due to the robust design of the industrial saw, the use of the latest servo technology, and well-planned chip removal. Precise Guide System in Portal Design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and maximum service life of the bandsaw. Band-Guiding Parts Made of Gray Cast Iron are made by Behringer and ensure vibration damping directly at the cutting interface, thereby increasing the tool life. Automatic Guide Arm Adjustment This means that the metal bandsaw offers optimal sawing results without adjustment effort - even with frequently changing material widths.

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 510 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 2,220 mm, total length: 2,000 mm, total width: 2,850 mm, overall weight: 3,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the HBE411A Dynamic bandsaw automaton Band guide components made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This allows for a noticeable increase in the service life of the saw blades. Auto-Feed Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed rate and cutting speed. Energy efficient The use of modern drives and a special hydraulic system reduces energy consumption by approximately 30% compared to the previous model. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Electrically driven chip brush with Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Servo feed system The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Your advantage: higher cutting performance and longer blade life! Automatic guide arm adjustment This provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Easy operation Quick and easy operation of all functions of the bandsaw via touch control. Gksdpfxez Rwx Io Abhjd Double clamping device offers process reliability – especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the bandsaw and fix both the initial material and the sections that have just been cut.

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 350 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 1,820 mm, total length: 1,850 mm, total width: 2,300 mm, overall weight: 1,900 kg, table height: 800 mm, section length (min.): 10 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the HBE321A Dynamic bandsaw automat Band guide parts made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This noticeably increases the service life of the saw blades. Servo feed system The saw feed is controlled by a ball screw and a servo motor. This results in significantly shorter cycle times and more precise saw feeds. Your advantage: higher cutting performance and longer band service life! Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Auto-Feed-Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed and cutting speed. Electrically powered chip brush with a Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the metal bandsaw to the changing material cross-sections. Due to its arrangement directly at the back of the saw blade, the system regulates quickly and precisely. Automatic guide arm adjustment This ensures that the metal bandsaw provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Energy-efficient Gksdoz Rwitspfx Abhjd The use of modern drives and a special hydraulic system reduces energy consumption by approx. 30% compared to the previous model. Easy to operate Quick and easy operation of all functions of the metal bandsaw via touch control. Double clamping device offers process reliability, especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the metal bandsaw and fix both the raw material and the sections that have just been cut.

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF, including sorting and infeed magazine (optional), air filtration system, and much more. The machine is in stock and will be refurbished. Gsdpfx Abezhki Ashskd The photos show the machine in its original condition.

Condition: ready for operation (used), Year of construction: 2020, total width: 865 mm, total height: 2,175 mm, overall weight: 470 kg, cutting speed: 68,000 mm/min, product length (max.): 1,335 mm, Circular Metal Saw manufactured in 2020. This Behringer VMS 370 PV features a cutting capacity of up to 130 mm for round material and 120 x 120 mm for square material. It includes a saw blade diameter of 370 mm and a hydro-pneumatic saw feed. If you are looking to get high-quality cutting capabilities, consider the Behringer VMS 370 PV machine we have for sale. Contact us for further details. • Cutting capacity at 90°: • Round: up to 130 mm diameter • Square: up to 120 × 120 mm • Flat: up to 200 × 100 mm • Cutting capacity at 45°: • Round: up to 130 mm diameter • Square: up to 100 × 100 mm • Flat: up to 140 × 100 mm • Cutting capacity at 30°: • Round: up to 105 mm diameter • Square: up to 90 × 90 mm • Flat: up to 100 × 100 mm • Saw blade diameter: 370 mm • Motor power: 2.0 / 2.6 kW Gkjdez Dg Idjpfx Abhsd • Saw blade speeds: 17 / 34 / 68 rpm • Optional saw blade speeds: 8 / 16 / 32 / 64 rpm • Saw feed: Hydro-pneumatic • Material clamping: Pneumatic • Mitre cutting range: -45° to +45° • Additional mitre angle: 30° on one side • Coolant system: Integrated • Material support height: 900 mm

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Coolant pump / minimum quantity spray device Pneumatic material clamping Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Gksdpfxjznxg No Abhed Weight: approx. 800 kg

Condition: used, Year of construction: 2012, Technical data: Cutting range round / square / rectangular ø: 400 / 350 x 350 / 380 x 300 mm Saw blade dimension: 650 x 50 x 2.5 mm 3 stroke speeds: 40 / 62 / 90 strokes/min Drive power: 3.0 kW Footprint (WxDxH), approx.: 1800 x 650 x 1250 mm Weight, approx.: 1050 kg Equipment: Gjdpeydittsfx Abhekd - 3 stroke speeds - Infinitely variable cutting pressure adjustment - Minimum quantity lubrication - Pre-tensioned plate guide for the saw frame - Dustproof enclosed gearbox - Accelerated return stroke of the saw frame - Enclosed oil hydraulic system - Coolant device - Limit switch - Automatic lifting of the saw frame - Miter device up to 45° - 1 new saw blade

Year of construction: 1997, condition: used, Clamping device for automatic band saw, hydraulic double vice, saw unit mounting, feed, material positioning -Upport saw unit: from automatic band saw Behringer HBP 360 A -Stroke: 675 mm Gedpfegbvnnox Abhokd -Shaft: Ø 40 mm -Measurements: see photos -Dimensions: 720/1545/H220 mm -Weight: 236 kg

Condition: ready for operation (used), Eisele VMS 300 Saw, Cold Circular Saw, Circular Saw Cutting range: max. 120 x 75 (straight cut), max. 80 x 75 (45° miter cut) Weight: 185 kg Max. saw blade: Ø 300mm Saw blade speed: 20 / 40 RPM Year of manufacture: 2002 Length stop Measuring device Roller conveyor You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT ID is required. Subject to prior sale. Visit our shop and view our other offers. Gedszypw Nspfx Abhekd The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: new, Year of construction: 2026, 10 machines in stock, Behringer Eisele VMS 350 & 370 in standard configuration, new machines, including 1 saw blade and full warranty. Top prices! Machines differ in the type and combination of coolant units. Example of equipment: High-performance circular saw machine VMS 370----- 400 V, 50 Hz, 2.0/2.6 kW, Gkodpfx Ajz Ihbtobhed including clamping device on the left and right of the saw blade, saw blade speeds 17/34 RPM, with integrated coolant system, including electrical equipment according to VDE 0.113, CE compliant, ready for operation.

Condition: new, Year of construction: 2026, 5 machines in stock, Behringer Eisele VMS 350 in standard configuration, new machines, including 1 saw blade and full warranty. Top prices! Equipment: High-performance circular sawing machine, type VMS 350 – with pole-changeable three-phase motor, 400 V, 50 Hz, 1.4/1.9 kW, including clamping device on the left and right of the saw blade, speed 17/34 rpm, with integrated coolant system, including electrical equipment according to VDE 0.113, machine design CE-compliant and ready for operation. Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Maximum cross-section for machining, round at 90°: 120 mm Maximum cross-section for machining, rectangular at 90°: 170 x 100 mm Maximum cross-section for machining, round at 45°: 120 mm Maximum cross-section for machining, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade width: 3 mm Bore diameter: 40 mm Adjustable saw blade speed: 17 rpm / 34 rpm Machine top part swivels: 45-90-45-30° Gjdpfx Abs Adp Erohekd Total motor power: 1.4/1.9 kW Width: 900 mm Length x Width x Height: 1050 x 900 x 1900 mm