Used Belle Minimix 150 for sale (9,800)

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Hfjdpfsw Hthzjx Af Ask

Condition: ready for operation (used), Year of construction: 2024, A brand new AME belt filter system for continuous cleaning of cooling lubricants (e.g. emulsions, oils) using the gravity principle is available. Emulsion capacity: 150l/min, oil capacity: 90l/min, tank volume: 800l, machine dimensions X/Y/Z: approx. 1900mm/1000mm/1300mm, weight: approx. 410kg. Documentation available. On-site inspection is possible. Hedpfovr Efkex Af Asfk

Year of construction: 1993, condition: ready for operation (used), A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible. Hfsdpfxezhw S Ds Af Ajk

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Hodpfx Afsgrzh Ej Asfk Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: new, 30,06 m Shelving, 40 cm deep , Workshop shelving , Storage racks , Large capacity shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 30.06 running meters Hfsdpfx Afeztv Rcs Aok Shelf offer 30.06 running meters consisting of: - 031 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 150 x shelf approx. 100 x 40 cm. - 600 x shelf holder. - 031 x Diagonal 1176 mm ( for crossing ). - 031 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 3661,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 15.06 m shelving, 40 cm deep , Workshop shelving , Storage shelving , Manual storage , Push-in shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 15.06 running meters Shelf offer 15.06 running meters consisting of: - 016 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 075 x shelf approx. 100 x 40 cm. - 300 x shelf holder. - 016 x Diagonal 1176 mm ( for crossing ). - 016 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1648,00 € net Hfsdpfx Aeztv Ibjf Ajk plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, 60.06 m shelving, 60 cm deep , Workshop shelving , Storage shelving , Manual storage , Push-in shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 60.06 running meters Shelf offer 60.06 running meters consisting of: - 0061 x upright approx. 200 x 60 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0300 x shelf approx. 100 x 60 cm. - 1200 x shelf holder. - 0061 x Diagonal 1176 mm ( for crossing ). - 0061 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. Hfodpfx Aeztv H Rsf Ajk -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8000,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 15.06 m shelving, 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 60 cm Hjdpfx Afoztv H Dj Aofk - Length : approx. 15.06 running meters Shelf offer 15.06 running meters consisting of: - 0016 x upright approx. 200 x 60 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0075 x shelf approx. 100 x 60 cm. - 0300 x shelf holder. - 0016 x Diagonal 1176 mm ( for crossing ). - 0016 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2116,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 60.06 m shelving, 40 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 60.06 running meters Shelf offer 60.06 running meters consisting of: - 0061 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0300 x shelf approx. 100 x 40 cm. - 1200 x shelf holder. - 0061 x Diagonal 1176 mm ( for crossing ). - 0061 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. Hjdpfx Aoztv Hkef Asfk -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5.610,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein ja ja/nein ja ja/nein tiltable up to 30 Grad Motor output 2,8 kW Table dimensions 850 x 300 mm sanding width 150 mm Hfsdpfx Aszfqkzof Aek Weight 330 kg

Condition: good (used), Year of construction: 2023, functionality: fully functional, Invent air blower ITB150-15 Hjdpfxjvyrxyj Af Aofk Characteristics: Power 120 kW Voltage 500 V Air flow rate 51 m3/min Pressure 40 – 150 kPa

Condition: good (used), Year of construction: 2023, functionality: fully functional, Invent air blower ITB150-15 Characteristics: Power 120 kW Hedpfovyrxgjx Af Aefk Voltage 500 V Air flow rate 51 m3/min Pressure 40 – 150 kPa

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Hfedpfx Afsv S Synj Aok Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: MCH-D 150, total length: 2,000 mm, total width: 1,000 mm, total height: 1,000 mm, overall weight: 2,000 kg, input voltage: 400 V, type of input current: three-phase, power: 55 kW (74.78 HP), input current: 55 A, input frequency: 50 Hz, Equipment: documentation/manual, MICROCUTTER EMULSIFIER SUITABLE TO CREATE FINE CHOP AND EMULSIFIED MIXES : MEAT EMULSIONS SAUSAGE AND WURST EMULSIONS Hfedpfx Afozrfg Rj Aek LIVER PATE MARINADES AND SAUCES FRUIT AND VEGETABLE PUREE'S SOUPS

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 Hjdpfx Afoltrpzj Asfk - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 spare part no.: 6443081 manufacturer no.: 345449 Dition: gebraucht

Condition: new, functionality: fully functional, empty load weight: 106 kg, maximum load weight: 644 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,470 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,360 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 150 Tipper NEW VEHICLE Internal dimensions: 147cm x 106cm Total weight: 750 Kg Payload: 644 Kg Side panel height: 30cm Unbraked, single-axle, low-loader trailer Side panels made of galvanized sheet steel Rear side panel can be folded down and removed Easy conversion Bolted and galvanized steel frame Drawbar can be folded down Screen-printed wood floor 13-pole electrical system Rear lamps with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side panels 40cm - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without frame Hedpfx Afozk Hb Hs Aefk - High cover 80cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Further accessories available upon request! Pictures are for illustrative purposes and may show optional accessories that incur additional costs. Plus vehicle registration document and freight to Gera 100 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repairs, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2027, year of last overhaul: 2026, total width: 1,200 mm, total height: 1,300 mm, input frequency: 50 Hz, empty load weight: 2,000 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 63 A, TOP Spiral Mixer Kemper SP 150 AL with 2 mixing bowls Mixer for a maximum of 250 kg of dough Dough machine with cover with 2 timer switches and 2 speeds Connection 400V, 63A-CEE plug Dimensions: 1200 x 1550 x 1300/2000 mm, WxDxH Used machine, refurbished with warranty + service package Quality from a specialist company! Benefit from over 35 years of experience! Option: Delivery service additional mixing bowls maintenance contract Hsdew S Sncopfx Af Aefk Experience our world of bakery machines!

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Hsdpfx Afsyly Drj Asfk

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,052 h, load capacity: 15,000 kg, lifting height: 3,180 mm, fuel type: diesel, mast type: simplex, construction height: 2,940 mm, fork carriage width: 1,700 mm, fork length: 1,100 mm, empty load weight: 25,060 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,000 mm, Compact forklift – Diesel Load center: 600 Fork width: 160 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 40x20x30 Rear tire type: Solid tires Rear tire size: 28x12x22 Description: In addition to this autumn model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this ATAIR IV D 150CV Super Compact. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Hfodpfx Afey Tzqqs Ask Side shifter, fork positioner Fork positioner opening range: 350/1120 mm Heater, full cab

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Hfedjzpxhispfx Af Ask Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, mileage: 37,850 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, first registration: 12/2022, color: yellow, suspension: steel, fuel: electricity, Equipment: ABS, air conditioning, airbag, cruise control, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, traction control, EM1 Driver Assistance System: Driver Fatigue Detection Sensor, 6I1 Driver Assistance System: Lane Assist, 3V6 Speed Control System (Cruise Control) incl. Speed Limiter and Intelligent Speed Assist, 41M Alloy Wheels, 9ZV Mobile Phone Interface with Wireless Charging Function, QK1 Multifunction Camera / Front Camera, 8IT Headlights LED, 1S5 Onboard Tool Kit, Tire Repair Kit and Jack, 9192 Paint: 2-tone paint, solid / metallic, EV3 Charging Cable with Schuko Plug (10 A, Mode 2), 4UF Airbag Driver/Passenger Side, Passenger Airbag Deactivatable, GM1 Acoustic Pedestrian Protection, Exterior Sound (e-sound), 8ZQ Antenna Diversity, 1AC Anti-lock Braking System (ABS), 8AS Audio System Ready 2 Discover (Touchscreen Color Display 10 inches), 7UJ Audio System: Preparation for later activation of navigation function Discover Pro, 6YD Exterior Mirrors Electrically Adjustable, Heated and Folding with Mirror Lowering Function, 5JB Exterior Mirrors Convex, Left and Right, 8GJ DC/DC Converter 3 kW, 1PE Anti-theft Protection for Wheels (Wheel Locks), 4G3 Driver Assistance System: Evasive Maneuvering Assistant and Turning Assistant, 7X2 Driver Assistance System: Parking Assistance Front and Rear, 8J3 Driver Assistance System: Emergency Braking Assistant (Front Assist) incl. Pedestrian and Cyclist Recognition, QR9 Driver Assistance System: Traffic Sign Recognition, 4DE Window in Loading/Passenger Compartment: - Fixed, Front Left, 4EE Window in Loading/Passenger Compartment: - Fixed, Front Right, 4GS Windshield, Laminated Glass, Tinted, 6T2 Footwell Lighting Front and Rear, 3U7 Luggage Compartment Cover / Roller Blind, G1Z Transmission for Electric Vehicle, 3RC Rear Tailgate with Glazing, 4HM Rear Window, 8M1 Rear Window Wiper with Intermittent Operation, J9D HV Battery. Hfodezt Rz Nepfx Af Ask We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! More:!! Leasing/Financing and Trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our website.

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Hjdpfed Iapyox Af Asfk Cutting width 1.500 mm Front table length 750 mm Equipment • program • air table • side table right • side table left • light barrier • 2 knives

Condition: good (used), Size: 320 x 420 mm; min 75 x 150 mm Hjdpfx Ajr Duu Ajf Aefk Speed: max 9000 Ex./h Number of stitches Standard: 11 Stitching length: 19 mm Power requirements: 50 Hz, 3 Phasen kW (220/380V, 50Hz) Compressed air: 4 bar Weight: 2300 kg (approx.) Engine speed: 2,5 kw

Year of construction: 1989, condition: ready for operation (used), Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks Hfjdodubvqjpfx Af Ask • 2 set of knives • external knife changing device • central lubrication • belt delivery

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 150 1 Control unit for the mixer 1 Manual shut-off valve 1 Separate control panel ("remote control") Technical data for the 150 series, WBH 150: Parameter | Value Nominal volume | 150 l Usable volume | 105 l A | 1,460 mm B | 670 mm C | 754 mm Empty weight | approx. 270 kg Hfsdpfx Aeztwbvsf Ajk Subject to prior sale Please submit inquiries only by email. Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.