Used Bend Band for sale (6,992)

Condition: good (used), Year of construction: 2002, cutting diameter 320 mm saw band length 4160 mm cutting width 610 mm cutting lenght max. 500 mm clamping head: max. 620 mm saw speed stufenlos 15-120 m/min work height max. 760 mm dimensions of saw-band 4160 x 34 x 1,1 mm Control Siemens Siematic OP3 total power requirement 2,6 kW weight of the machine ca. 1,96 t dimensions of the machine ca. 2,55 x 2,45 x 1,5 m Well-maintained fully automatic miter band saw with Siemens Siematic OP3 control for quantity and cutting length, hydraulic frame clamp, stepless saw band speed. Machine only used in individual production with small pieces for about 3 hours per week! Estimated operating hours = 3400. Cutting range 0° / 90° - round 320 mm - FLAT 610 x 320 mm !!!! Cutting range 75° - round 320 mm - flat 350 x 200 mm Cutting range 60° - round 300 mm Ffedpfev Htimox Afneu - flat 300 x 200 mm Cutting range 45° - round 260 mm - flat 250 x 180 mm Cutting range 30° - round 160 mm - flat 150 x 150 mm Please notice: Price of this machine new: €28000 Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1981, roll diameter 315 mm throat 295 mm workpiece height 190 mm Motor Capacity 0,37/0,8 kW table-size 470 x 450 mm saw band length 2220 mm cutting speeds 450 + 900 m/min weight of the machine ca. 110 kg Fsdpfjyatycex Afnjfu dimensions of the machine ca. 640 x 510 x 1600 mm

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little Fjdpfxjvtgn Ne Afnefu until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: new, sheet width 1290 mm plate thickness 5 mm pre-bending ja roll diameter 120 mm roll speed 1 - 6 m/min total power requirement 1,1 kW weight of the machine ca. 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Fodpfx Asvzhgpjfnefu Machine dealer with own stock of 1600 m².

Condition: good (used), Thickness of sanding paper 1,1 mm Width of sanding paper 34 mm Length of sanding paper 5620 mm a total of 19 units in stock Fsdpoxwzbhefx Afnefu

Condition: good (used), Year of construction: 2007, Used manual bandsaw by Thomas Type ZIP 35 Manual, single-sided mitre cut Capacity 250 x 350 mm Ffjdpfx Ajyhmglefnou

Condition: used, 0 0,4 - 3mm mm Workingpiece thickness from to 10-50 mm Total length , mm Feed speed 9 m/min. Weight ca. 1500 kg BI-MATIC edge banding machine type PRIMA 7.3 r.a. PLUS MAN Partnership Edition One-man operation, very little use, from business closure ----- - Technical manufacturer's description: Units: Jointing unit including AIGNER diamond jointing cutter heads, with DIA Konstantin interchangeable cutter system and controlled edge blow-off nozzle behind the 2nd jointing cutter head. Crosscut saw unit with extraction device including pneumatically swivelling saw blades, adjustable and programmable from the control panel. Radius milling unit Rounding unit (copying milling unit) with insertable base function and 2-position turret. The entire unit can be inserted and removed pneumatically. Radius scraper unit can be inserted and removed, including extraction device with chip collection box for scraper chips. Flat scraper unit with 4-way scraper blades. The entire unit can be inserted and removed. Flat scraper blade unit with 4-way scraper blade. The entire unit can be inserted and removed. Removed glue residue is extracted. Buffing unit with 2 fabric buffing discs arranged at an angle. Equipment: - High-gloss package: roller scanning for radius milling unit, radius scraper unit and flat scraper unit - Large viewing, noise and protective cabin for all units and for the glue pot - Interior lighting - Control panel with 12" touchscreen and self-explanatory user guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue pot with quick-change system and energy-saving mode in standby - Glue roller with screw conveyor for long and tall workpieces (especially for PUR adhesive) - Pressure zone with motor-driven 1st pressure roller - Heavy roller cap shear for edges 54 x 3 mm - Feed guide adjustable via hand wheel (joint thickness adjustment) with numerical display - Upper roller pressure bar with numerical workpiece thickness display and hand wheel adjustment - Pressure zone with numerical display and handwheel adjustment - Manual 2-position turret for radius milling unit - Manual 2-position turret for rounding unit - Manual 2-position turret for radius scraper unit Technical data: Edge thickness: 0.4 - 3 mm Min. panel width (without rounding unit): 80 mm Min. panel width (with rounding unit): 130 mm Min. panel length (without rounding unit): 100 mm Min. panel length (with rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 9 m/min Suction nozzle: 2 x 150 mm Ffedpsyif Tdofx Afnju Connection: 9 kW - 400 V Compressed air: 6 bar ----- Price of the above machine on request! ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: used, Model: USF-8 SPEZ Serial No: 37531 Capacities: Throat Depth: 810mm Fodpsydv R Esfx Afnjfu Height Under Blade Guide: 550mm Table: 1480 x 1220mm Table Traverse: 1000mm Feeds: Variable Speeds Variable: 12 – 3000 Rpm Blade Size: 6550 x 38mm Complete With: Operators Consul Laser Alignment Coolant Hydraulic Blade Tensioning Approximate Dimensions: 2400 x 2400 x 3750mm Approximate Weight: 1500kg

Condition: used, Automatic Horizontal Bandsaw Year: 2011 Serial Number: 11042134 Model: LX – 460AE Blade Size: 4770MM x 41 MM x 1.3MM Ffjdpfx Aoydv Rrofnou Hydraulic Cutting Capacity: 460MM x 430MM

Condition: used, Year of construction: 2001, Used horizontal bending machine from Sterli Bieger Ffjdpsyg Ntrsfx Afnou Type: 300 HE/CE Capacity: 30 tons Including bending dies: V45, V80 and V125 mm

Condition: used, Year of construction: 2010, cutting diameter 510 mm saw band length 6400 mm cutting width 1,1 mm cutting range - square - 500 x 500 mm feed length 750 mm feed length: multiple max. 6750 mm cutting speed 20 - 140 m/min dimensions of saw-band 6400 x 54 x 1,1 mm cutting range min. ø 10 mm Fsdpjyh Rlpefx Afnsfu cutting range min. 10 x 8 mm control BEHRINGER control TERMINAL BT-41 total power requirement 5,5 kW weight of the machine ca. 3,0 t dimensions of machine L x W x H 3,15 x 2,34 x 2,40 m - double column guided - Accessories: chip conveyor, coolant

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm cutting width 350 mm Control NC 5.0 band speed 15 - 100 m/min capacity 0 degrees: round 350 mm capacity 0 degrees: square 350 x 350 mm table height 860 mm total power requirement 4 kW weight of the machine ca. 2,8 t Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column for 0 ° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: - Driven chip conveyor, can be installed on the right or left of the machine - Clamping pressure regulation of the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw machines, which can also be operated semi- automatically, with the new MEP 50, specially developed by MEP for automatic machines, Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the workpiece backwards in order to avoid scoring at the cutting surface when the belt moves up again at the end of the cut. - Fieldbus communication system with double microprocessor and serial connection. - The user interface with 7 ”touch screen display and mechanical keys are used for the operating functions of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as Ffsdpfx Afjwu Hhdjnju a real-time control of all cutting parameters standard equipment - Shark 350 NC Machine is immediately available from stock, subject to prior sale

Condition: excellent (used), Year of construction: 2013, number of rollers: 3, shaft diameter: 130 mm, rotational speed (distance/time): 6,000 mm/min, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Fodpfx Ajyha I Aefnefu Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), De plaatdikte is afhankelijk van het profiel. dop: 0,5 1,5 mm 7 stations vermogen: 2,4 kW gewicht: 430 kg Fjdpfxsygyvwe Afnsfu

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton Fsdpfx Afsygywusnjfu - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: ready for operation (used), Buispolijstmachine Fedpfoygywbex Afnsfu Voor buizen tot diameter 200 mm

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Fodpfeyh D Nnjx Afnefu Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine xH: 5,3 x 2,4 x 2,0 m

Condition: like new (used), Year of construction: 2010, FICEP ZAAG 1045 BH Main technical specifications - Minimum sawing capacity at 90°: 80 x 10 mm - Maximum sawing capacity at 90°: 1015 x 450 mm - Sawing capacity at 45°: 620 x 450 mm - Sawing capacity at 60° (only available on two flanges with relevant option): 350 x 350 mm - Mitre angles: +45° / -60° - Bandsaw blade dimension: 41 x 1.3 mm - Bandsaw blade speed: 20 - 100 m/min Ffodpfx Aowd Ugtefnsu - Band motor power: 5.5 kW - Working table height: 850 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 25498, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 260 mm, working width: 2,070 mm, sheet thickness (max.): 25 mm, TECHNICAL DETAILS Sheet width: 2,070 mm Sheet thickness: 25 mm Bending capacity: 18 mm Top roller diameter: 320 mm Side roller diameter: 260 mm Lower roller diameter: 320 mm MACHINE DETAILS Ffedoygw Ikepfx Afnou Total power supply: 26 kW Dimensions & Weight Space requirement: approx. 4,700 x 2,000 x 2,200 mm Machine weight: approx. 8,100 kg EQUIPMENT Hydraulic lateral roller adjustment Conical bending device 2 driven rollers Hardened rollers Hydraulic drop-end bearing Mobile control panel Foot switch Safety device CE marking

Condition: used, Year of construction: 1999, Used punching machine for sheet metal processing in good condition. Shows visible signs of use consistent with age. Features: Boschert E1 500 Digic punching machine, Digic control system, long infeed table (approx. 4 meters), stationary industrial design. Electrical: 400 V, 50 Hz, 3-phase. Ffsdpfx Asyh H Dujfnju

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Fedpfx Afjw I H Rkjnjfu Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: used, functionality: fully functional, YEAR 1990 Power rating 15 kW Shaft diameter ø 120 mm Roller diameter ø 400 mm Ffodpfjummkaox Afnju Resistive moment Cm 333 Cm3 IPN capacity 240 x 106 mm Capacity HEB 120 x 114 mm Capacity Pipe wall thickness x Ø 139 x 5 mm Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic

Condition: used, Year of construction: 2016, Technical details: cutting diameter: 330 mm saw band length: 4680 mm sawing motor: 4 kW Ffsdpjx A D Nlofx Afnju cutting speed: 15 - 100 m/min square: 330 x 500 mm cutting length min.: 10 mm cutting lenght max.: 850 (-9999) mm total power requirement: 7,7 kW weight of the machine ca.: 5,5 t space requirements approx. LxWxH: 2,7 x 2,35 x 1,7 m Automatic horizontal bandsaw, hydraulic, material dimension max.: dia 330 mm, rectangular 330 mm x 500 mm, dimension of bandsaw 4680 x 34 x 1,1 mm, incl. roller track *

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Fodpeukgiqjfx Afnofu Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 13000x1700x1700 mm Ffedpfjv A Htwox Afnju Weight 1650 kg Total power requirement 10 kw