Used Bend Band for sale (7,483)

Condition: used, roll diameter / mm throat / mm workpiece height / mm Table dimensions: 615x615mm Iiedpfx Aceuddmroljf

Condition: new, roll diameter / mm throat / mm workpiece height / mm Vertical band saw – Model P70.110 Capacity 90° (mm) Height: 700 mm Width: 1100 mm Length: 6000 mm Ijdpfx Asy Eh A Dscloif Motors Main motor (saw blade drive): 5.5 kW Hydraulic motor: 1.5 kW Coolant pump: 0.25 kW Feed servo motor: 1.5 kW Chip conveyor: 1.1 kW Further technical data Saw blade size: 7770 × 54 × 1.6 mm Material feed height: 1440 mm Hydraulic oil tank capacity: 40 l Coolant tank capacity: 190 l Machine dimensions (H × W × L): 4500 × 4000 × 8700 mm Weight: 20,000 kg Standard equipment - Hydraulically driven chip brush - Speed control device (belt speed adjustable via frequency converter) - Servo feed system (1–500 mm/min) - Hydraulic saw blade tensioning - Saw blade break detection and stop system - Touchscreen user interface - Laser line display (laser marking) - Scraper-type chip conveyor - Hydraulically movable arm (automatic) - Chip trolley / chip container - Material alignment piston (for aligning the material) The images are for guidance only and are not a true-to-scale representation of the machine.

Condition: used, Year of construction: 1982, roll diameter / mm throat / mm workpiece height / mm table-size 600 x 600 mm weight of the machine ca. ca. 650 kg Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Iedpfji E Ahdjx Acloif Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, Year of construction: 1971, roll diameter / mm throat / mm workpiece height / mm table-size 800x750 mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Iisdpfx Acowgi R Sjlof Description has been adopted.

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement 4/380 kW weight of the machine ca. 1645 kg required space 1500 x 1000 x 1400 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 80 Upper shaft diameter: Ø 80 mm Bottom shaft diameter: Ø 70 mm Roll diameter: Ø 245 mm Working speed: 7 m/min Motor power: 4.75 kW / 380 V Dimensions (L x W x H): 1500 x 1000 x 1400 mm Weight: 1645 kg Iiedpfx Acjyk Im Eeljf Standard accessories Steel construction welded frame 3 Rolls are powered Hardened and ground shafts made of high tensile special steel Rolls are hardened and ground Horizontal and vertical working position Hardened standard rolls Mobile control panel 3 Axis mechanical lateral angle guide rolls Brake motor equipped for the precision bending Digital Read-Outs (2pcs) Optional Equipments Pipe, tube and profile bending rolls Hydraulic lateral guide rolls (2 axis) Automation with NC control

Condition: ready for operation (used), Year of construction: 2024, machine/vehicle number: Ser.-Nr. 22212875, Metal bandsaw Bekamak BMSO 320, year of manufacture: 09.2024, with roller conveyor, approx. 3 meters in length. The machine is available for purchase via an online insolvency auction on our website. You can access the auction by clicking on the link in the advertisement. Isdpfxszumf Ts Acljif

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Isdpjzubxhsfx Acleif Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: used, Year of construction: 2002, machine/vehicle number: 0104-260033, JAESPA vertical band saw for miter cuts, V 380 DG/DGHS series Iisdpfx Aszuaxmoclsf The machine is suitable for precise sawing and miter cuts and features hydraulic equipment as well as a coolant system. Technical data: Saw motor: 2.2 kW Hydraulic pump: 0.37 kW Coolant pump: 0.18 kW Band speed: 17–100 m/min Saw band dimensions: 4,250 × 34 × 1.1 mm Material support height: 1,000 mm Coolant tank: 50 liters Robust industrial machine from JAESPA – ideal for metalworking, locksmithing, and workshops.

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iiedpeztxn Rjfx Aclsf Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) Iiedpfezuhbiex Aclef • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Iiedpfx Aowm Rqtoclef Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Isdpjwlfdxofx Acleif Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: used, Year of construction: 2009, Bi-Matic Dynamic 4.5.S.7 (year of manufacture 2009): Dimensions of processed material: Edge thickness: 0.4 – 3.0 mm (in coils), up to 5 mm (in strips). Part thickness (panels): 8 – 50 mm. Minimum part width: 60 mm. Minimum part length: 90 mm. Operating parameters: Working feed speed: 7 m/min (constant speed of the feed belt). Working air pressure: 6 bar. Adhesive heating time: approx. 5–6 minutes (Teflon bath). Iiedpfxszvfdwe Acljf Automatic edge banding machine, application zone, pressing zone, single-motor edging on THK guides, tilting milling unit, radius cutter, brushes. The machine is still in operation. Available for immediate pickup.

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 Ijdpef T Rzfofx Acleif at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, functionality: fully functional, Year of construction: 2026, BIKO B4 2014 Linear Four roll bending machine Iijdjiinknepfx Aclef Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2014 Technical specifications: Number of Rolls: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 145 mm Lower roller diameter: 130 mm Side roller diameter: 130 mm Guaranteed installed power: 5.5 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 2,300 kg Length: 2,900mm Width: 900mm Height: 1,000mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 4 mm Bending performance (full working width) 3 mm from pipe diameter 725 mm Rolling capacity (full working width) 3 mm Bending performance (full working width) 2 mm from pipe diameter 190 mm Standard equipment: Linear guide system for rolls movement Extremely wide bearing blocks Needle bearing for the rolls rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Iedpfxeiivgro Acloif Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP Iiedot Akt Rspfx Aclof

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Number of Rolls: Four Ijdod Iclrepfx Acloif Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Ijdegd T R Djpfx Acljif Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Iisdpfx Aceiivg Ssljf Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 Iiedpfst Akxaex Aclof - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Iiedpfx Ajwwt Ddeclsf Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Ijdpfx Aceiivfqeloif Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, shaft diameter: 35 mm, rotational speed (max.): 30 rpm, overall weight: 490 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: CE marking, documentation/manual, BPR BA 35 CNC Three-roll ring bending machine, hydraulic Technical data: Shaft diameter: 35 mm Roll diameter: on request Shafts made of durable steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft speed (variable): 0–30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Ijdpfx Acowwt Hfeljif Three powered rollers with smooth surface Electronic control BPR Probending CNC Hydraulic cylinder pressing force: 5500 kg Working pressure: 190 bar Accessories included: Rollers for 1" pipe Straightening rollers Operator's key Operating manual

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Isdpfx Acsiivc Deloif Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification