Manual roofing swivel bending machine

WIEGAND WF-1x2000

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology Fodpfx Aoy Sf Ukem Esgi The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm Fsdpfx Amey D Rxre Eegi - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 0.5 rpm Vertical adjustment 500 mm Fsdpfx Ameuk Niye Eegi Clamping plate diameter 1000 mm Rotation 2.2 kW Lifting motor 2 x 2.2 kW Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger bending machine with segmented top clamp PNEUMATIC CYLINDER!!! Including manual backstop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Fsdpfxoga T Dps Am Esgi Max. opening width ----- 30 mm Width of the fingers ----- 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm Max. bending angle ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: excellent (used), loading space volume: 54 m³, Year of construction: 2002, Hüffermann LL101s/Roll-off Container 54 cbm/5 UNITS AVAILABLE • Manufacturer: Hüffermann • Model: LL101s • Year of manufacture: 2002 • Unladen weight: 3,900 kg • Permissible total weight: 15,000 kg • Nominal capacity: 54 cbm • Internal dimensions: 7.4 m x 2.42 m x 2.95 m • External dimensions: 7.52 m x 2.55 m x 3.185 m Fgedpfxewaap Ej Am Eei • Floor: 3 mm S235 steel sheet • Sides: 3 mm S235 steel sheet • Rear side: 3 mm S235 steel sheet • Doors: twin-leaf • External colour: RAL 1226

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Fodpfx Amjxfrv Es Eegi are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: - Maximum material thickness with a tensile strength of 40 kg/mm²: approx. 3 mm Fedohrm Iuepfx Am Eogi - Shaft diameter: 45 mm - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirement: approx. W 550 x H 1200 x D 1200 mm - Weight: approx. 180 kg

Condition: new, Year of construction: 2026, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request Fjdpfewak U Eex Am Eogi

Year of construction: 2026, condition: new, functionality: fully functional, power: 1,500 kW (2,039.43 HP), overall weight: 1,800 kg, table length: 2,500 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, This laser metal cutting machine can operate sheet material with a thickness of 3-4 mm. Wattsan 1325 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It features a working space of 1300x2500 mm. The loading rollers of the precise Wattsan 13250 E make material feeding easier. The E-series laser metal machine has a maximum travel speed of 80 meters per minute. Laser power can be up to 1,5 kw. The bed here is made of steel. You can give our managers a call for additional details! Wattsan 1325 E characteristics Working area: 1300x2500 mm Laser power: up to 1500 W Weight: 1620 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Fgsdpfx Amjiicw Ee Eei Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 1995, condition: excellent (used), 3 Sulzer MB 40-160/5 centrifugal pumps Fedsd Sybpepfx Am Eogi Flow rate: 32 m³/h Head: 147 m Maximum temperature: 130°C Seal: Mechanical seal with barrier fluid Drive power: Siemens 22 kW Speed: 2950 rpm ! Price per unit !