Used Bending Rolls for sale (9,482)

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Hfjdox Ii Hvopfx Abrec Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical Details: Working width: 3100 mm Hfedpfx Aboxyvx Tsroc Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2008, Technical Data: Working width: 1030 mm Max. bending capacity for mild steel St40: 10.0 mm Upper roller diameter: 170 mm Number of driven rollers: 2 Electric drive Hfjdpfx Asx Nntksbrsc Mobile control panel Manual swing-out of the upper roller CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 2700 x 1200 x 1300 mm Net weight: approx. 2.8 tons The seller accepts no liability for typing or data transmission errors. The machine is in condition in line with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Hfedjwkaalepfx Abroc Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2021, Technical data: Conical bending machine Working width: 1050 mm Max. bending capacity for standard steel St40: 4.0 mm Diameter of conical upper roller: 70 - 185 mm Diameter of side and central lower rollers: 105 mm Conical bending device Mobile control panel with digital display Hodpfxew An Uhj Abrsfc Hydraulic folding bearings CE marking Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very little used, as new condition The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear consistent with its age; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Hfedpfxewchn Ue Abrec Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Hjdpov Htnijfx Abrofc Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rollers: 3 Top roller diameter: 410 mm Bottom roller diameter: 380 mm Hydraulic folding bearing Extended rollers for profile bending Control panel with digital display Motor power: 40 kW Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 22 tons Accessories: Side hydraulic bending aids Hfodpfxswchplo Abroc

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, A very well-maintained 4-roll CNC plate bending machine LUNA Model: 8344 17/06 Four-roll drive CNC control Mylock 100 Control system operates 4 functions: Feed, bending, clamping, and locking of the top roll Hfsdpfxjx Nw N Ie Abrjc Max. working width: 1750 mm Max. sheet thickness: 0.6 mm Year of manufacture: 2003 Weight: 700 kg Made in Sweden

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Hfjdpfx Absh U Rzgjrsc CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, sheet thickness: 6bending length: 2550upper roll diameter: 190prebending: 5sheet length: 2550Model MRM-S 3 rollers Motorized asymmetric plate bending machines Steel welded frame - Motorized adjustment of the rear roller Hfedpfxsflvl As Abroc Options: Hardened rollers         1.800,- Extended roller shafts:    500,- Role segment:              750,- Digital display:           800,- All prices excluding VAT

Condition: new, messurements (LxWxH): 3.600 x 1.120 x 1020weight approx.: 2.400total power requirements: 4prebending: 5sheet thickness: 6sheet length: 2030 Hfjdpfsd Ab Haox Abrsc

Condition: new, bending length: 2600sheet thickness: 7upper roll diameter: 200 Hfjdpfxjd Ab Ngs Abrjc Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  - In acccordance with CE norms Options: - Lower roll powered by electric motor EURO 2.200,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- - Profile rolls EURO 1.190,-- We have many references!

Condition: new, bending length: 1600sheet thickness: 8upper roll diameter: 170 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rolls are driven by brake electric motor and planetary gearboxes in gear system - Portable control panel  - In acccordance with CE norms Options: - Lower roll powered by electric motor EURO 1.650,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Extended rolls for profile rolls EURO 966,-- - Profile rolls EURO 1.190,-- Hfedpfx Aed Ab Nqsbroc We have many references!

Condition: new, bending length: 1550sheet thickness: 3.5upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: Hedpfx Ajd Ab N Debrefc - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 995,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: new, sheet thickness: 35bending length: 4100upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) Hfedpfx Abjd Ab N Iorec - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 6.940,-- - metarial feeding table EURO 5.100,-- - oil coiler STD - center support EURO 18.750,-- - side supports EURO 17.000,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 70bending length: 2100upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 6.940,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 19.500,-- - side supports EURO 10.400,-- Hfodpfxsd Ab N So Abroc - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 45bending length: 2100upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.506,-- Hfodpfxjd Ab Rns Abrsc - oil coiler   STD. - center support EURO 13.600,-- - side supports EURO 9.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 13bending length: 4100upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- Hedjd Ab Ruepfx Abrofc - center support EURO 13.600,-- - side supports EURO 12.516,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 6bending length: 3100upper roll diameter: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 7.070,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Hedpfed Ab Sdex Abrjfc We have many references!

Condition: new, bending length: 4100sheet thickness: 25upper roll diameter: 460 Hodpfx Aed Ab Spsbrefc Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.400,-- We have many references!

Condition: new, bending length: 3100sheet thickness: 13upper roll diameter: 300 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.400.00 We have many references! Hjdsd Ab S Tjpfx Abrjfc

Condition: new, bending length: 2100sheet thickness: 16upper roll diameter: 270 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: Hfodpod Ab Tfofx Abrjc variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 5.700.00 We have many references!

Condition: new, bending length: 3100sheet thickness: 8upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Hfodpfxod Ab Tgs Abrsc Options: variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 7.070.00 We have many references!

Condition: new, bending length: 2100sheet thickness: 6upper roll diameter: 160 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Hjdpfxjd Ab Tre Abrefc Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 4.600,-- We have many references!